From 80edd9cab3258d58b08e1512f026f2433c3d0d05 Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Thu, 27 Apr 2023 13:19:23 -0600 Subject: [PATCH] slight improvement in wording --- FAQs/computerconnection.mdwn | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/FAQs/computerconnection.mdwn b/FAQs/computerconnection.mdwn index 14a49c5..7ca079e 100644 --- a/FAQs/computerconnection.mdwn +++ b/FAQs/computerconnection.mdwn @@ -23,8 +23,8 @@ battery voltage and then two "dits" (Morse code I) indicating that it's entering idle/interactive mode, followed by the pyro continuity beeps one time only. At that point, you should be able to configure it from our software, etc. If, instead, you hear 'di dah dah dit' (Morse code P) and -the continuity beeps repeat every few seconds, you won't be able to talk to -the board. +the continuity beeps repeat every few seconds, the board is in pad mode and +you won't be able to talk to it. By FAR the biggest problem we see are folks trying to use micro USB cables that don't have all the pins connected. Apparently, lots of -- 2.47.2