From 533cf459ef2157161f90e3f14ba622428f6aaf56 Mon Sep 17 00:00:00 2001
From: Bdale Garbee <bdale@gag.com>
Date: Thu, 29 Oct 2020 10:44:25 -0600
Subject: [PATCH] add sot23-6 scad model

---
 packages/SOT23-6.fp   |  1 +
 packages/sot23-5.scad |  6 ++----
 packages/sot23-6.scad | 41 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 44 insertions(+), 4 deletions(-)
 create mode 100644 packages/sot23-6.scad

diff --git a/packages/SOT23-6.fp b/packages/SOT23-6.fp
index 024ad3f..7b497e4 100644
--- a/packages/SOT23-6.fp
+++ b/packages/SOT23-6.fp
@@ -1,6 +1,7 @@
 
 Element["" "SOT23-6" "" "" 5615 7584 -10161 -12011 0 100 ""]
 (
+	Attribute("openscad" "sot23-6")
 	Pad[-3739 -5708 -3739 -4527 2756 984 3356 "pin6" "6" "square"]
 	Pad[-3739 4528 -3739 5709 2756 984 3356 "pin1" "1" "square,edge2"]
 	Pad[0 -5708 0 -4527 2756 984 3356 "pin5" "5" "square"]
diff --git a/packages/sot23-5.scad b/packages/sot23-5.scad
index 10ff8f7..2f29327 100644
--- a/packages/sot23-5.scad
+++ b/packages/sot23-5.scad
@@ -1,5 +1,5 @@
 
-module sot23()
+module sot23_5()
 {
 
 	// pin prototype
@@ -30,10 +30,8 @@ module sot23()
 			translate([-0.5,0,0.5-0.43/2])
 				pin(-0.5, 0.4, 0.43);
             
-           translate([-0.5,0,2.3-0.43/2])
+            translate([-0.5,0,2.3-0.43/2])
 				pin(-0.5, 0.4, 0.43);
 		}
 	}
 }
-
-sot23();
diff --git a/packages/sot23-6.scad b/packages/sot23-6.scad
new file mode 100644
index 0000000..cf5dff8
--- /dev/null
+++ b/packages/sot23-6.scad
@@ -0,0 +1,41 @@
+
+module sot23_6()
+{
+
+	// pin prototype
+	module pin(length, height, thick)
+	{
+		linear_extrude(height=thick)
+			scale([length, -height, 1])
+				polygon([[0.3400,0.0000],[0.3900,0.0100],[0.4300,0.0300],[0.4600,0.0600],[0.4789,0.0908],[0.6279,0.8307],[0.6500,0.8600],[0.6900,0.8900],[0.7300,0.9000],[1.0000,0.9000],[1.0000,1.0000],[0.6700,1.0012],[0.6100,0.9900],[0.5600,0.9600],[0.5300,0.9200],[0.5200,0.9000],[0.3721,0.1693],[0.3500,0.1400],[0.3100,0.1100],[0.2700,0.1000],[0.0000,0.1000],[0.0000,0.0000]]);
+	}
+
+	rotate([90,0,-90]) scale([1.13,1.13,1.13]) translate([-0.9, 0.4, -2.1 - 0.43/2]) {
+		// body
+		color([0.1,0.1,0.1])
+			linear_extrude(height=2.9)
+				polygon([[-0.55,0],[-0.45,0.53],[0.45,0.53],[0.55,0],[0.45,-0.35],[-0.45,-0.35]]);
+
+		// 3 pins
+		color([0.9, 0.9, 0.9]) {
+			translate([0.5,0,0.5-0.43/2])
+				pin(0.5, 0.4, 0.43);
+
+			translate([0.5,0,1.4-0.43/2])
+				pin(0.5, 0.4, 0.43);
+
+            translate([0.5,0,2.3-0.43/2])
+				pin(0.5, 0.4, 0.43);
+            
+			translate([-0.5,0,0.5-0.43/2])
+				pin(-0.5, 0.4, 0.43);
+            
+            translate([-0.5,0,1.4-0.43/2])
+				pin(-0.5, 0.4, 0.43);
+            
+            translate([-0.5,0,2.3-0.43/2])
+				pin(-0.5, 0.4, 0.43);
+		}
+	}
+}
+
-- 
2.47.2