From 455450fe17ceb0f4ed9d3c072fc7afba258b6fea Mon Sep 17 00:00:00 2001 From: eb Date: Sun, 25 Feb 2007 23:33:37 +0000 Subject: [PATCH] Additional specs for USRP inband signaling. Control channel sub-packets are now specified. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4633 221aa14e-8319-0410-a670-987f0aec2ac5 --- usrp/doc/inband-signaling-usb | 189 +++++++++++++++++++++++++++++++++- 1 file changed, 186 insertions(+), 3 deletions(-) diff --git a/usrp/doc/inband-signaling-usb b/usrp/doc/inband-signaling-usb index d49daed4..a6cf8b8e 100644 --- a/usrp/doc/inband-signaling-usb +++ b/usrp/doc/inband-signaling-usb @@ -10,7 +10,7 @@ format across the USB. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - |O|U|D|S|E| mbz | Chan | mbz | Tag | Payload Len | + |O|U|D|S|E| RSSI | Chan | mbz | Tag | Payload Len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Timestamp | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ @@ -60,6 +60,10 @@ format across the USB. when the FPGA runs out of samples between bursts. + RSSI 6-bit Received Strength Signal Indicator: Must be zero in OUT + packets. In IN packets, indicates RSSI as reported by front end. + FIXME The format and interpretation are to be determined. + Chan 5-bit logical channel number. Channel number 0x1f is reserved for control information. See "Control Channel" below. Other channels are "data channels." Each data channel is logically @@ -76,8 +80,16 @@ format across the USB. Payload Len: 9-bit field that specifies the length of the payload field in bytes. Must be in the range 0 to 504 inclusive. - Timestamp: 32-bit timestamp. [FIXME, Write more] - On OUT packets, 0xffffffff means "Now". + Timestamp: 32-bit timestamp. + On IN packets, the timestamp indicates the time at which the + first sample of the packet was produced by the A/D converter(s) + for that channel. On OUT packets, the timestamp specifies the + time at which the first sample in the packet should go out the + D/A converter(s) for that channel. If a packet reaches the + head of the transmit queue, and the current time is later than + the timestamp, an error is assumed to have occurred and the + packet is discarded. As a special case, the timestamp + 0xffffffff is interpreted as "Now". Payload: Variable length field. Length is specified by the Payload Len field. @@ -86,3 +98,174 @@ format across the USB. is unspecified. This field pads the packet out to a constant 512 bytes. + + + +"Control Channel" payload format: +--------------------------------- + +The control channel payload consists of a sequence of 0 or more +sub-packets. + +Each sub-packet starts on a 32-bit boundary, and consists of an 8-bit +Opcode field, an 8-bit Length field, Length bytes of arguments, and 0, +1, 2 or 3 bytes of padding to align the tail of the sub-packet to +a 32-bit boundary. + +Control channel packets shall be processed at the head of the queue, +and shall observe the timestamp semantics described above. + + +General sub-packet format: +-------------------------- + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-//-+-+-+-+-+-+-+-+ + | Opcode | Length | ... | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-//-+-+-+-+-+-+-+-+ + + +Specific sub-packet formats: +---------------------------- + + RID: 6-bit Request-ID. Copied from request sub-packet into corresponding + reply sub-packet. RID allows the host to match requests and replies. + + Reg Number: 10-bit Register Number. + + + +Ping Fixed Length: + + Opcode: OP_PING_FIXED + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | 2 | RID | Ping Value | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +Ping Fixed Length Reply: + + Opcode: OP_PING_FIXED_REPLY + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | 2 | RID | Ping Value | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +Write Register: + + Opcode: OP_WRITE_REG + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | 6 | mbz | Reg Number | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Register Value | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +Read Register: + + Opcode: OP_READ_REG + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | 2 | RID | Reg Number | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +Read Register Reply: + + Opcode: OP_READ_REG_REPLY + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | 6 | RID | Reg Number | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Register Value | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +I2C Write: + + Opcode: OP_I2C_WRITE + I2C Addr: 7-bit I2C address + Data: The bytes to write to the I2C bus + Length: Length of Data + 2 + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | Length | mbz | I2C Addr | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Data ... . + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +I2C Read: + + Opcode: OP_I2C_READ + I2C Addr: 7-bit I2C address + Nbytes: Number of bytes to read from I2C bus + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | 3 | RID | mbz | I2C Addr | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Nbytes | unspecified padding | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +I2C Read Reply: + + Opcode: OP_I2C_READ_REPLY + I2C Addr: 7-bit I2C address + Data: Length - 2 bytes of data read from I2C bus. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | Length | RID | mbz | I2C Addr | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Data ... . + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +SPI Write: + + Opcode: OP_SPI_WRITE + Enables: Which SPI enables to assert (mask) + Format: Specifies format of SPI data and Opt Header Bytes + Opt Header Bytes: 2-byte field containing optional Tx bytes; see Format + Data: The bytes to write to the I2C bus + Length: Length of Data + 6 + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | Length | mbz | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Enables | Format | Opt Header Bytes | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Data ... . + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +SPI Read: + + Opcode: OP_SPI_READ + Enables: Which SPI enables to assert (mask) + Format: Specifies format of SPI data and Opt Header Bytes + Opt Header Bytes: 2-byte field containing optional Tx bytes; see Format + Nbytes: Number of bytes to read from SPI bus. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | 7 | RID | mbz | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Enables | Format | Opt Header Bytes | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Nbytes | unspecified padding | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +SPI Read Reply: + + Opcode: OP_SPI_READ_REPLY + Data: Length - 2 bytes of data read from SPI bus. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Opcode | Length | RID | mbz | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Data ... . + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + -- 2.30.2