From 3ae69fe659bbc92a494a2c469327805c2516e99b Mon Sep 17 00:00:00 2001 From: =?utf8?q?Jean-Luc=20B=C3=A9chennec?= Date: Tue, 15 Dec 2015 15:12:55 +0100 Subject: [PATCH] Added STM32L053R8 Hello, checked this board with stink. It communicates without flaw with the board: ``` 2015-12-15T14:47:03 INFO src/stlink-common.c: Loading device parameters.... 2015-12-15T14:47:03 INFO src/stlink-common.c: Device connected is: L0x3 device, id 0x10086417 2015-12-15T14:47:03 INFO src/stlink-common.c: SRAM size: 0x2000 bytes (8 KiB), Flash: 0x10000 bytes (64 KiB) in pages of 128 bytes 2015-12-15T14:47:03 INFO gdbserver/gdb-server.c: Chip ID is 00000417, Core ID is 0bc11477. 2015-12-15T14:47:03 INFO gdbserver/gdb-server.c: Target voltage is 3264 mV. 2015-12-15T14:47:03 INFO gdbserver/gdb-server.c: Listening at *:4242... ``` When I launch GDB and connect to the server, I get : ``` 2015-12-15T14:51:41 ERROR gdbserver/gdb-server.c: [FP_CTRL] = 0x00000041 expecting 0x00000261 2015-12-15T14:51:41 INFO gdbserver/gdb-server.c: GDB connected. ``` on the st-util side and : ``` Cannot access memory at address 0xffffffff ``` on the GDB side Reading and writing to memory and registers works however I get ``` Cannot access memory at address 0xffffffff ``` Each time I write to the memory or to a register --- README | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/README b/README index 10feb7d..ac1dd0e 100644 --- a/README +++ b/README @@ -200,6 +200,7 @@ Known Working Targets: * STM32F303RET6 (STM32 Nucleo-F303RE board) * STM32F334R8 (STM32 Nucleo-F334R8 board) * STM32F411RET6 (STM32 Nucleo-F411RE board) -& STM32F756NGHx (STMF7 evaluation board) +* STM32F756NGHx (STMF7 evaluation board) +* STM32L053R8 (STM32 Nucleo-L053R8 board) Please report any and all known working combinations so I can update this! -- 2.47.2