From 35e5e0712730d09804949df3f15a2fae1a6a704b Mon Sep 17 00:00:00 2001 From: oharboe Date: Tue, 18 Aug 2009 10:18:18 +0000 Subject: [PATCH] Piotr Ziecik Due to errors in chipselect management in davinci_nand driver OpenOCD was able to access only to chips attached to first EMIF chipselect. This patch fixes chipselect management code and allows OpenOCD to access to NAND devices attached to any EMIF CS line. git-svn-id: svn://svn.berlios.de/openocd/trunk@2585 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/flash/davinci_nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/flash/davinci_nand.c b/src/flash/davinci_nand.c index 8d2d7e978..ffd35608d 100644 --- a/src/flash/davinci_nand.c +++ b/src/flash/davinci_nand.c @@ -365,7 +365,7 @@ static int davinci_write_page_ecc1(struct nand_device_s *nand, uint32_t page, struct davinci_nand *info = nand->controller_priv; target_t *target = info->target; const uint32_t fcr_addr = info->aemif + NANDFCR; - const uint32_t ecc1_addr = info->aemif + NANDFECC + info->chipsel; + const uint32_t ecc1_addr = info->aemif + NANDFECC + (4 * info->chipsel); uint32_t fcr, ecc1; /* Write contiguous ECC bytes starting at specified offset. @@ -676,11 +676,11 @@ static int davinci_nand_device_command(struct command_context_s *cmd_ctx, || aemif == 0x01e10000 /* dm335, dm355 */ || aemif == 0x01d10000 /* dm365 */ ) { - if (chip < 0x0200000 || chip >= 0x0a000000) { + if (chip < 0x02000000 || chip >= 0x0a000000) { LOG_ERROR("NAND address %08lx out of range?", chip); goto fail; } - chipsel = (chip - 0x02000000) >> 21; + chipsel = (chip - 0x02000000) >> 25; } else { LOG_ERROR("unrecognized AEMIF controller address %08lx", aemif); goto fail; -- 2.30.2