From 149b38fdd2aa7602c1a08ebab3df38d79750d27b Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Sun, 26 Apr 2009 17:38:08 -0600 Subject: [PATCH] document new location for the firmware git repository --- TeleMetrum/index.mdwn | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/TeleMetrum/index.mdwn b/TeleMetrum/index.mdwn index 64a1f90..81a1df8 100644 --- a/TeleMetrum/index.mdwn +++ b/TeleMetrum/index.mdwn @@ -103,7 +103,8 @@ simplify things by building a new altimeter with integrated RF link! ## Artifacts ## The hardware design current gEDA files are available from -[git.gag.com](http://git.gag.com). The 'fab' tag on the master branch reflects +[git.gag.com](http://git.gag.com) in the project hw/telemetrum. The 'fab' +tag on the master branch reflects the artwork as sent out for PCB fab. The 'loaded' tag on the master branch indicates the parts Bdale loads for a functional board, but the schematic does not reflect the cuts and jumps or added resistors. The 'nextcut' branch @@ -119,6 +120,10 @@ of files in more easily readable form. The schematic and BOM are from the * [pcb artwork](telemetrum.pcb.pdf) * [bill of materials](telemetrum.bom) + Keith has working firmware that has now been flown once and successfully -collected flight data to apogee. We'll publish a link to the git -repository here soon! +collected flight data to apogee. The source is also available from +[git.gag.com](http://git.gag.com) in the project fw/altos. Not that actually +building these sources requires a modifified version of sdcc and a set of +helper utilities that we're not publishing since we hope to have the important +bits accepted upstream shortly. Watch this space for more details soon. -- 2.47.2