oharboe [Thu, 28 Feb 2008 11:00:35 +0000 (11:00 +0000)]
Pavel Chromy - cleanup error messages
git-svn-id: svn://svn.berlios.de/openocd/trunk@376
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 10:49:22 +0000 (10:49 +0000)]
fix gaffe.
git-svn-id: svn://svn.berlios.de/openocd/trunk@375
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 10:44:41 +0000 (10:44 +0000)]
Pavel Chromy cleaned up checks for halted, error messages, etc.
git-svn-id: svn://svn.berlios.de/openocd/trunk@374
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 28 Feb 2008 10:38:04 +0000 (10:38 +0000)]
- svn file props set to LF endings
git-svn-id: svn://svn.berlios.de/openocd/trunk@373
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 10:24:46 +0000 (10:24 +0000)]
fix from Pavel Chromy
this patch fixes an issue in jtag_init - shall not reset jtag to NULL.
This causes jtag interface (USB device) not to be closed properly if jtag chain validation fails.
Once the underlaying jtag interface is initialized, jtag pointer shall be left untouched,
even in case of an error, so that proper cleanup can be done, see exit_handler in openocd.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@372
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 28 Feb 2008 10:07:54 +0000 (10:07 +0000)]
- added svn props
- fixed mixed line endings on flash.c, log.c, gdb_server.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@371
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 09:34:18 +0000 (09:34 +0000)]
code to be used in upcoming minidriver work.
git-svn-id: svn://svn.berlios.de/openocd/trunk@370
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 09:32:09 +0000 (09:32 +0000)]
added some code that will be used in upcoming minidriver work.
git-svn-id: svn://svn.berlios.de/openocd/trunk@369
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 09:30:06 +0000 (09:30 +0000)]
fix copyright.
git-svn-id: svn://svn.berlios.de/openocd/trunk@368
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 09:21:56 +0000 (09:21 +0000)]
jtag_add_shift() fn - minidriver work in progress.
git-svn-id: svn://svn.berlios.de/openocd/trunk@367
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 08:37:01 +0000 (08:37 +0000)]
lingering change for eCos flash driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@366
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 08:25:46 +0000 (08:25 +0000)]
eCos flash driver.
git-svn-id: svn://svn.berlios.de/openocd/trunk@365
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 08:11:18 +0000 (08:11 +0000)]
- Added TARGET_REQ_DEBUGCHAR target_request debugmsg. This
provides a better impeadance match for debug output char fn's, e.g. eCos.
- Line endings are now added at the caller site of command_print*(). command_print()
still adds a line ending
- echo of commands in scripts are now available via debug_level instead of
forced echo
- Added a USER_SAMELINE() for printing without a lineend.
git-svn-id: svn://svn.berlios.de/openocd/trunk@364
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 28 Feb 2008 07:44:13 +0000 (07:44 +0000)]
- fix line-endings
git-svn-id: svn://svn.berlios.de/openocd/trunk@363
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Thu, 28 Feb 2008 07:35:51 +0000 (07:35 +0000)]
- fix line-endings
git-svn-id: svn://svn.berlios.de/openocd/trunk@362
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 07:26:14 +0000 (07:26 +0000)]
Uwe Hermann Add @dircategory and @direntry to the info page -- they're used to add the openocd info page to the global index of info pages in the system (usually /usr/share/info/dir).
git-svn-id: svn://svn.berlios.de/openocd/trunk@361
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Thu, 28 Feb 2008 07:25:06 +0000 (07:25 +0000)]
Uwe Hermann fixed some warnings.
git-svn-id: svn://svn.berlios.de/openocd/trunk@360
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Wed, 27 Feb 2008 18:59:38 +0000 (18:59 +0000)]
- correct line endings from previous commit
git-svn-id: svn://svn.berlios.de/openocd/trunk@359
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Wed, 27 Feb 2008 17:25:33 +0000 (17:25 +0000)]
- fix typo in ep93xx jtag driver to allow OpenOCD compilation on ARM (thanks to Uwe Hermann for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@358
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Wed, 27 Feb 2008 06:59:35 +0000 (06:59 +0000)]
- fix bug in ft2232 pathmove (thanks to Michael Bruck for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@357
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 27 Feb 2008 06:44:45 +0000 (06:44 +0000)]
Nicolas Pitre listed some more devices.
git-svn-id: svn://svn.berlios.de/openocd/trunk@356
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 26 Feb 2008 19:56:45 +0000 (19:56 +0000)]
- fix issue when target is already halted
git-svn-id: svn://svn.berlios.de/openocd/trunk@355
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 26 Feb 2008 19:51:18 +0000 (19:51 +0000)]
- code reformat (Thanks Pavel Chromy)
git-svn-id: svn://svn.berlios.de/openocd/trunk@354
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 26 Feb 2008 19:24:49 +0000 (19:24 +0000)]
fix naming conflict under Windows.
git-svn-id: svn://svn.berlios.de/openocd/trunk@353
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 26 Feb 2008 14:19:27 +0000 (14:19 +0000)]
oopss.. another jtag minidriver reset gaffe.
git-svn-id: svn://svn.berlios.de/openocd/trunk@352
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 26 Feb 2008 13:21:57 +0000 (13:21 +0000)]
jtag_add_reset() minidriver gaffe fixed.
git-svn-id: svn://svn.berlios.de/openocd/trunk@351
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 26 Feb 2008 11:53:54 +0000 (11:53 +0000)]
Next step in the JTAG minidriver. This should be fairly close to the final thing, but
I'm not calling it "done" quite yet.
git-svn-id: svn://svn.berlios.de/openocd/trunk@350
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Tue, 26 Feb 2008 06:25:22 +0000 (06:25 +0000)]
- jtag minidriver work in progress
- svn:eol-style=native. Let's see how that works out :-)
git-svn-id: svn://svn.berlios.de/openocd/trunk@349
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 25 Feb 2008 20:18:26 +0000 (20:18 +0000)]
- remove build warnings
git-svn-id: svn://svn.berlios.de/openocd/trunk@348
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Mon, 25 Feb 2008 17:48:04 +0000 (17:48 +0000)]
- convert all files to unix line-ending
git-svn-id: svn://svn.berlios.de/openocd/trunk@347
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 17:32:53 +0000 (17:32 +0000)]
Pavel Chromy
- multiple log listeners
- added OUTPUT() to replace printf
- fix formatting
git-svn-id: svn://svn.berlios.de/openocd/trunk@346
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 15:12:00 +0000 (15:12 +0000)]
formatting.
git-svn-id: svn://svn.berlios.de/openocd/trunk@345
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 14:58:20 +0000 (14:58 +0000)]
Pavel Chromy style fixes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@344
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 14:50:31 +0000 (14:50 +0000)]
Fix from Pavel Chromy.
https://lists.berlios.de/pipermail/openocd-development/2008-February/001018.html
git-svn-id: svn://svn.berlios.de/openocd/trunk@343
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 13:09:15 +0000 (13:09 +0000)]
- Fix target library path problem w/Windows
git-svn-id: svn://svn.berlios.de/openocd/trunk@342
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 08:22:18 +0000 (08:22 +0000)]
From Michael Bruck
- bugfix in server.c
- removed unused parameter from jtag_add_ir_scan et al. This
wasn't necessary in hindsight but anyway.
- arm11 source committed but not not in Makefile.am/target.c for now.
git-svn-id: svn://svn.berlios.de/openocd/trunk@341
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 08:08:31 +0000 (08:08 +0000)]
committed bugfix from Michael Bruck
git-svn-id: svn://svn.berlios.de/openocd/trunk@340
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 08:01:21 +0000 (08:01 +0000)]
dos2unix fix.
git-svn-id: svn://svn.berlios.de/openocd/trunk@339
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 07:50:03 +0000 (07:50 +0000)]
- using ERROR_COMMAND_SYNTAX_ERROR to print syntax in a couple of places
- some more flash cleanup of checking halted state
- moved output handler into options.c
- very slightly tweaked server.c to make it a bit more compatible with eCos
- retired arch_state. Not quite sure how I managed to leave that out last time.
git-svn-id: svn://svn.berlios.de/openocd/trunk@338
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 07:32:52 +0000 (07:32 +0000)]
- "flash write_binary" is now "flash write_bank" to clarify the focus of the
command and reduce confusion with "flash write_image".
- retired deprecated "flash erase" & "flash write".
- added flash_driver_protect/write/erase() that are wafer thin frontend
functions to low level driver functions. They implement checks
that were inconsistently handled by the drivers, e.g. check for
target halted was done in a spotty fashion.
- use return ERROR_COMMAND_SYNTAX_ERROR to print out
syntax of command instead of having lots of inlined replicas of
the command line syntax(some of which were wrong).
- use logging instead of dubious translation of error values to
human understandable explanations of why things failed.
The lower levels log the precise reason and the higher
levels can ammend context as the error propagates up
the call stack.
- simplified flash API slightly with logging instead of
allocating and returning information that the caller then
has to translate into print statements.
git-svn-id: svn://svn.berlios.de/openocd/trunk@337
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 25 Feb 2008 06:44:46 +0000 (06:44 +0000)]
Michael Bruck spotted an omission in svn 322
git-svn-id: svn://svn.berlios.de/openocd/trunk@336
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 21:54:09 +0000 (21:54 +0000)]
- added "xscale fast_memory_access" which speeds up memory
access by disabling "unecessary" checks.
- arm926ejs. Added missing type->mmu and type->virt2phys fn's.
for now these are used by working_area when specifying
mmu enabled and mmu not enabled address
git-svn-id: svn://svn.berlios.de/openocd/trunk@335
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 21:11:09 +0000 (21:11 +0000)]
move options handling to separate file to better support embedded implementations of OpenOCD
git-svn-id: svn://svn.berlios.de/openocd/trunk@334
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 20:10:48 +0000 (20:10 +0000)]
- added -c option that will execute an openocd command
- added at91eb40a target library example.
git-svn-id: svn://svn.berlios.de/openocd/trunk@333
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 18:52:45 +0000 (18:52 +0000)]
- fixed target->type->poll() return value
- added arch_state to show status of currently selected target
- simplified target->type->arch_state() api.
- clean up telnet output a bit
- fixed GDB output for arch_state
- removed a couple of unecessary exit()'s
- cleaned up error propagation a bit in a few places
git-svn-id: svn://svn.berlios.de/openocd/trunk@332
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 18:48:22 +0000 (18:48 +0000)]
disable cfi_write_words(). Broken for spansion, fallback
is a slower codepath that is reported to work.
git-svn-id: svn://svn.berlios.de/openocd/trunk@331
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 18:46:09 +0000 (18:46 +0000)]
debug_level 3 now prints seconds since start of openocd
git-svn-id: svn://svn.berlios.de/openocd/trunk@330
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Sun, 24 Feb 2008 18:24:04 +0000 (18:24 +0000)]
- concretize JTAG state transition rules (previously implied behaviour is now documented)
git-svn-id: svn://svn.berlios.de/openocd/trunk@329
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 17:33:00 +0000 (17:33 +0000)]
sharpend JTAG docs w.r.t. hw fifo implementations and retired jtag_cancel_queue() which is inheritely incompatible with a hw fifo concept.
git-svn-id: svn://svn.berlios.de/openocd/trunk@328
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 17:18:03 +0000 (17:18 +0000)]
added svn:ignore for files generated by bootstrap + build process.
git-svn-id: svn://svn.berlios.de/openocd/trunk@327
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sun, 24 Feb 2008 17:10:48 +0000 (17:10 +0000)]
cosmetic fixes to debug output + phasing out printf() in favour of logging system. From Pavel Chromy <chromy@asix.cz>
git-svn-id: svn://svn.berlios.de/openocd/trunk@326
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Sun, 24 Feb 2008 12:30:45 +0000 (12:30 +0000)]
- fixes possible crash when GDB connection is closed while target is running due to log callback sending messages to connection which does not
exist anymore (thanks to Pavel Chromy for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@325
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Sat, 23 Feb 2008 16:30:13 +0000 (16:30 +0000)]
- fix for feroceon CP15 register access (thanks to Niolas Pitre for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@324
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Sat, 23 Feb 2008 13:39:06 +0000 (13:39 +0000)]
- Use NAND extended geometry information (thanks to Ben Dooks for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@323
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sat, 23 Feb 2008 12:02:15 +0000 (12:02 +0000)]
- added a test document as a starting point
- corrected URL information for the repro
git-svn-id: svn://svn.berlios.de/openocd/trunk@322
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sat, 23 Feb 2008 08:24:59 +0000 (08:24 +0000)]
- added time command
- changed syntax of time measurements to seconds, e.g. 1.2324s
git-svn-id: svn://svn.berlios.de/openocd/trunk@321
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 22 Feb 2008 22:55:52 +0000 (22:55 +0000)]
- added patch to remove count and time information from log_printf
in case of debug_level is not set to LOG_DEBUG
git-svn-id: svn://svn.berlios.de/openocd/trunk@320
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 22 Feb 2008 16:49:07 +0000 (16:49 +0000)]
- cosmetic changes to print out version without line number/time
git-svn-id: svn://svn.berlios.de/openocd/trunk@319
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
vpalatin [Fri, 22 Feb 2008 16:43:13 +0000 (16:43 +0000)]
- fix read/write size for small unaligned accesses (thanks Michael Bruck)
git-svn-id: svn://svn.berlios.de/openocd/trunk@318
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 22 Feb 2008 16:13:07 +0000 (16:13 +0000)]
- added patch to solve problem with AT91SAM7SE MCU have 3, rather than just 2 GPNVM bits.
(Thanks to Pavel for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@317
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 22 Feb 2008 15:30:19 +0000 (15:30 +0000)]
- added patch to make single-stepping more resilient
(thanks to Nicolas Pitre for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@316
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
vpalatin [Thu, 21 Feb 2008 11:43:04 +0000 (11:43 +0000)]
- add support for Marvell Feroceon (thanks to Nicolas Pitre for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@315
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Wed, 20 Feb 2008 08:32:40 +0000 (08:32 +0000)]
- fix bug when using full paths to config files. Thanks Ted Roth
git-svn-id: svn://svn.berlios.de/openocd/trunk@314
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Tue, 19 Feb 2008 21:44:19 +0000 (21:44 +0000)]
- added patch which fixed big/small endian problems on non-x86 host CPUs.
https://lists.berlios.de/pipermail/openocd-development/2008-February/000846.html
(thanks to Øyvind for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@313
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 19 Feb 2008 20:04:57 +0000 (20:04 +0000)]
- add search paths via new arg -s (-search). Thanks Ted Roth
- updated docs for new command
git-svn-id: svn://svn.berlios.de/openocd/trunk@312
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Tue, 19 Feb 2008 19:52:09 +0000 (19:52 +0000)]
- add support for the majority of the Samsung ARM SoC family, S3C2410, S3C2412, S3C2413, S3C2440 and S3C2443 (thanks to Ben Dooks for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@311
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 19 Feb 2008 19:26:17 +0000 (19:26 +0000)]
- Fixed bug in pathmove for XScale
- added virtual address to working_area.
- Improved error messages in a number of places
- Added ERROR_COMMAND_SYNTAX_ERROR that commands can return to have syntax printed
- Added help for some config commands
- Added verification of sw breakpoints with ERROR() message
- Removed a couple of exit()'s and replaced with error message
- cosmetic fix to armv4_5.c, easier to read
- added polymorphic(with default) virt2phys and mmu enable query function to target.h
- added virt2phys command that uses target->type->virt2phys() fn
Thanks to Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@310
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 18 Feb 2008 18:48:04 +0000 (18:48 +0000)]
- reapply fix with telnet prompt while running/halting gdb
git-svn-id: svn://svn.berlios.de/openocd/trunk@309
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Mon, 18 Feb 2008 18:03:08 +0000 (18:03 +0000)]
- Fix problems with stuck telnet sessions. Thanks to Øyvind Harboe for this patch.
git-svn-id: svn://svn.berlios.de/openocd/trunk@308
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Mon, 18 Feb 2008 17:59:06 +0000 (17:59 +0000)]
- ignore data aborts during gdb memory read packets by default, and return 0x0 instead
- add configuration option "gdb_report_data_abort <enable|disable> to enable reporting of data aborts during gdb memory read packets
- thanks to Øyvind Harboe for identifying the problem with GDB and data aborts
- fix some warnings in gdb_server.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@307
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 18 Feb 2008 16:54:18 +0000 (16:54 +0000)]
- arg list now correctly released on error. Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@306
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 18 Feb 2008 15:41:38 +0000 (15:41 +0000)]
- fix broken JTAG error handling
- Allow all commands to be executed during config stage
- Help now works for config commands
- make var args handling follow the rules more closely
Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@305
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 18 Feb 2008 15:11:01 +0000 (15:11 +0000)]
- removed a raft of unecessary exit() calls. Issuing a reset will solve these ails.
- now uses jtag_state_pathmove() instead of making assumptions about implementation of jtag_statemove().
- fixed a couple of bugs in timeout handling
- removed megabytes of log output when communication is failing.
- sleep is now 300ms as documented instead of 3000ms
- fixed error path of bulk write
- debug_handler can now be issued during normal operation + has help text.
Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@304
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 18 Feb 2008 14:53:50 +0000 (14:53 +0000)]
- add new non-cfi SST flash device. Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@303
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 18 Feb 2008 14:32:43 +0000 (14:32 +0000)]
- Added a "User:" debug level. These are messages that are intended for the user and are part of normal operation.
- Faster DEBUG/INFO() when they are disabled
- target_read/write_buffer() now uses 16 and 32 bit access for single word aligned requests. Other requests are serviced as quickly as possible.
- *much* faster read/write GDB packets, removing timeout problems.
- GDB read/write packets w/single word aligned 32/16 bit access now use 32/16 bit word access.
- working area can now be changed on the fly. Provides a way to move working area about as MMU is enabled/disabled.
- cleaned up error messages for verify_image.
Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@302
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sun, 17 Feb 2008 11:06:58 +0000 (11:06 +0000)]
- combine similar functions in telnet_server.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@301
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 16 Feb 2008 15:21:13 +0000 (15:21 +0000)]
- solve lots of problems with stuck GDB connections, making it impossible to connect to GDB, handle timeout of acknowledgement, etc.
- "monitor halt/resume" now works correctly
- "monitor sleep 10000" no longer makes the GDB protocol lock up. There is an error message and the protocol recovers nicely afterwards.
- it's now possible to connect to a target which needs a reset before halt works.
- handle failed memory access more gracefully. Connection is now closed instead of OpenOCD quitting.
- *much* improved handling of 2 second timeout on memory read packets. Especially important w/mouseover evaluation of variables in Eclipse.
- fixed memory leak upon failed memory packet reply.
- 'O' packets w/progress info is no longer sent out randomly.
- faster packet reply code.
- Thanks to Øyvind Harboe for this patch
git-svn-id: svn://svn.berlios.de/openocd/trunk@300
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 16 Feb 2008 15:10:26 +0000 (15:10 +0000)]
- cleanup and remove time() warning
git-svn-id: svn://svn.berlios.de/openocd/trunk@299
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 16 Feb 2008 14:05:32 +0000 (14:05 +0000)]
- fix issue with telnet prompt while gdb running
git-svn-id: svn://svn.berlios.de/openocd/trunk@298
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 15 Feb 2008 19:07:43 +0000 (19:07 +0000)]
- fix xscale memory leak and warnings. Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@297
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 14 Feb 2008 18:32:52 +0000 (18:32 +0000)]
- fix programming issue with lpc2101/2
git-svn-id: svn://svn.berlios.de/openocd/trunk@296
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Thu, 14 Feb 2008 18:30:23 +0000 (18:30 +0000)]
- added patch to stop DEBUG messages to be forwarded to telnet/gdb.
(thanks to Øyvind for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@295
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 14 Feb 2008 10:02:51 +0000 (10:02 +0000)]
- added check for revA silicon in stm32 flash driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@294
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Wed, 13 Feb 2008 19:02:17 +0000 (19:02 +0000)]
- added patch to Improving progress/error output for telnet & GDB monitor
(thanks to Øyvind for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@293
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 12 Feb 2008 18:57:37 +0000 (18:57 +0000)]
- add autoprobe support to flash info command
- auto_erase can now be called from script/config file
git-svn-id: svn://svn.berlios.de/openocd/trunk@292
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Mon, 11 Feb 2008 17:53:14 +0000 (17:53 +0000)]
- removed "starting point" for ngw100, will add it again if it is working
git-svn-id: svn://svn.berlios.de/openocd/trunk@291
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 11 Feb 2008 09:11:50 +0000 (09:11 +0000)]
- telnet prompt behaves correctly for new synchronous halt/resume/reset commands
- removed unused variables in tms470.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@290
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 10 Feb 2008 19:04:31 +0000 (19:04 +0000)]
- added starting point for development on a ngw100 eval board
git-svn-id: svn://svn.berlios.de/openocd/trunk@289
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sun, 10 Feb 2008 15:46:14 +0000 (15:46 +0000)]
- stm32 flash driver now checks for correct target
git-svn-id: svn://svn.berlios.de/openocd/trunk@288
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sun, 10 Feb 2008 15:08:44 +0000 (15:08 +0000)]
- add autoprobe support to the stm32 flash driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@287
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 10 Feb 2008 12:58:24 +0000 (12:58 +0000)]
- added patch to change pathmove handling
https://lists.berlios.de/pipermail/openocd-development/2008-January/000678.html
(thanks to Øyvind for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@286
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 9 Feb 2008 11:44:17 +0000 (11:44 +0000)]
- added synchronous wait/resume patch. Thanks Øyvind Harboe
- updated docs for halt and wait_halt and resume commands
git-svn-id: svn://svn.berlios.de/openocd/trunk@285
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 7 Feb 2008 20:20:11 +0000 (20:20 +0000)]
- added synchronous reset patch, Thanks Øyvind Harboe
- added target_init_reset which calls target_process_reset after all drivers have been initialised
git-svn-id: svn://svn.berlios.de/openocd/trunk@284
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Wed, 6 Feb 2008 19:59:55 +0000 (19:59 +0000)]
- added patch to access cp15 register (XScale)
(thanks to Edgar Grimberg for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@283
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Wed, 6 Feb 2008 19:25:42 +0000 (19:25 +0000)]
- added patch to solve problem with AT91SAM9260 (dirty register)
(thanks to Øyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@282
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 4 Feb 2008 20:12:46 +0000 (20:12 +0000)]
- fixes issue with reset and arm926ejs core. Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@281
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 4 Feb 2008 08:25:07 +0000 (08:25 +0000)]
Added patch to stop SEGFAULT with missing jtag config lines. Thanks Øyvind Harboe
https://lists.berlios.de/pipermail/openocd-development/2008-January/000731.html
git-svn-id: svn://svn.berlios.de/openocd/trunk@280
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sat, 2 Feb 2008 13:42:37 +0000 (13:42 +0000)]
- added patch to solve the reset problem with arm9 and cortex which Spen had found.
https://lists.berlios.de/pipermail/openocd-development/2008-January/000729.html
(Thanks to Spen for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@279
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 27 Jan 2008 14:05:59 +0000 (14:05 +0000)]
- added autoprobe functionality
- corrected blocksize handling from GDB "info mem" command
(thanks to Øyvind and Spen for these patches)
git-svn-id: svn://svn.berlios.de/openocd/trunk@278
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 25 Jan 2008 18:09:21 +0000 (18:09 +0000)]
fixed incorrect elf segment size - Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@277
b42882b7-edfa-0310-969c-
e2dbd0fdcd60