]>
git.gag.com Git - hw/altusmetrum/log
Bdale Garbee [Sat, 1 Sep 2018 07:15:21 +0000 (02:15 -0500)]
another cap that's out of stock
Bdale Garbee [Thu, 23 Aug 2018 02:50:10 +0000 (20:50 -0600)]
go ahead and rename the 'other' partslist for consistency
Bdale Garbee [Thu, 23 Aug 2018 02:45:35 +0000 (20:45 -0600)]
DK won't take a parts list without .csv suffix now, so rename partlist.dk
Bdale Garbee [Thu, 23 Aug 2018 02:28:51 +0000 (20:28 -0600)]
pref parts updates in anticipation of TeleDongle build
Bdale Garbee [Fri, 17 Aug 2018 04:06:15 +0000 (22:06 -0600)]
add footprint for 4ucon 11071 micro USB in lihata format
Bdale Garbee [Fri, 17 Aug 2018 03:19:31 +0000 (21:19 -0600)]
pcb-rnd.mk: remove use of project, add instantiation of project.lht
Bdale Garbee [Fri, 17 Aug 2018 03:11:24 +0000 (21:11 -0600)]
add a project.lht template to force use of altusmetrum footprint library
Bdale Garbee [Fri, 17 Aug 2018 02:38:24 +0000 (20:38 -0600)]
update pcb-rnd.mk to assume lepton-eda with tEDAx output to pcb-rnd
Bdale Garbee [Tue, 14 Aug 2018 05:53:29 +0000 (23:53 -0600)]
rationalize header content
Bdale Garbee [Tue, 14 Aug 2018 05:51:11 +0000 (23:51 -0600)]
upate gnet-tEDAx.scm to work with lepton-eda, preserve geda-gaf version too
Bdale Garbee [Tue, 14 Aug 2018 04:44:08 +0000 (22:44 -0600)]
giving up on trying to get project name into the tEDAx header
Bdale Garbee [Mon, 13 Aug 2018 07:15:47 +0000 (01:15 -0600)]
a tEDAx output module for gnetlist / lepton-netlist to use with pcb-rnd
Bdale Garbee [Fri, 3 Aug 2018 08:47:42 +0000 (16:47 +0800)]
add 220uF through hole cap used on TeleFireEight to preferred parts
Bdale Garbee [Fri, 3 Aug 2018 08:42:55 +0000 (16:42 +0800)]
add 140 and 260 ohm 0402 resistors to preferred parts
Bdale Garbee [Fri, 3 Aug 2018 08:35:38 +0000 (16:35 +0800)]
add a current sense resistor for telefireeight to preferred parts
Bdale Garbee [Fri, 3 Aug 2018 08:32:09 +0000 (16:32 +0800)]
add datasheet metadata to INA180 current sense amp symbol
Bdale Garbee [Fri, 3 Aug 2018 08:27:21 +0000 (16:27 +0800)]
data sheet and schematic symbol for TI INA180 current sense amplifier
Bdale Garbee [Fri, 29 Jun 2018 02:28:35 +0000 (20:28 -0600)]
data sheet for female blade terminals useful for ATC fuses, etc
Bdale Garbee [Thu, 21 Jun 2018 19:13:23 +0000 (13:13 -0600)]
stop pretending we're using FreeCAD to generate g-code
Bdale Garbee [Fri, 15 Jun 2018 01:55:52 +0000 (19:55 -0600)]
telelco panel cover g-code generated and successfully used to cut first panel
Bdale Garbee [Fri, 15 Jun 2018 01:55:17 +0000 (19:55 -0600)]
footprint for suppression diode used in AMSAT LTI design
Bdale Garbee [Mon, 11 Jun 2018 10:44:25 +0000 (12:44 +0200)]
Omnetics connector for Fox LTI
Bdale Garbee [Wed, 30 May 2018 20:43:13 +0000 (14:43 -0600)]
thin panel around encoder and power switch, fix pcb screw holes
Bdale Garbee [Wed, 30 May 2018 17:57:34 +0000 (11:57 -0600)]
make note of changes needed in future prints of LCO panel
Bdale Garbee [Wed, 30 May 2018 17:55:02 +0000 (11:55 -0600)]
ignore pdf output from lowriter for TeleLCO panel
Bdale Garbee [Wed, 30 May 2018 17:54:11 +0000 (11:54 -0600)]
label for TeleLCO panel
Bdale Garbee [Tue, 29 May 2018 19:25:03 +0000 (13:25 -0600)]
document what the ledtower base file is for
Bdale Garbee [Tue, 29 May 2018 15:15:26 +0000 (09:15 -0600)]
new 4ucon micro USB part with posts
Bdale Garbee [Tue, 29 May 2018 07:26:05 +0000 (01:26 -0600)]
cut cavity from back side to get LCDs closer to surface
Bdale Garbee [Tue, 29 May 2018 06:25:40 +0000 (00:25 -0600)]
update panel to resolve SMA vs drag mode switch conflict
Bdale Garbee [Sun, 27 May 2018 21:06:27 +0000 (15:06 -0600)]
data sheets for new parts needed on Fox LTI FM
Bdale Garbee [Sun, 27 May 2018 19:57:00 +0000 (13:57 -0600)]
more mechanical output files to ignore
Bdale Garbee [Sun, 27 May 2018 19:54:44 +0000 (13:54 -0600)]
photo showing correct orientation of Power Pole connectors per ARES
Bdale Garbee [Sat, 26 May 2018 18:47:13 +0000 (12:47 -0600)]
add led tower holes and position rocker switches on telefireeight top
Bdale Garbee [Fri, 25 May 2018 20:10:37 +0000 (14:10 -0600)]
move LED tower wire hole to correct side, notch for bumps on ammo box
Bdale Garbee [Fri, 25 May 2018 19:55:54 +0000 (13:55 -0600)]
add drawing for plexiglass panel cover, adjust toggle switch lands
Bdale Garbee [Fri, 25 May 2018 18:25:19 +0000 (12:25 -0600)]
optimize length of toggle switch anti-rotation ribs on telelco panel
Bdale Garbee [Fri, 25 May 2018 17:56:42 +0000 (11:56 -0600)]
correct position of rib next to power switch on telelco panel
Bdale Garbee [Thu, 24 May 2018 23:29:31 +0000 (17:29 -0600)]
base for LED tower warning light on TeleFire boxes, straddles ammo box handle
Bdale Garbee [Wed, 23 May 2018 05:57:58 +0000 (23:57 -0600)]
added toggle switch lands and ribs, third print
Bdale Garbee [Wed, 23 May 2018 05:29:17 +0000 (23:29 -0600)]
snapshot
Bdale Garbee [Mon, 21 May 2018 13:49:43 +0000 (07:49 -0600)]
add datasheets for STM32F413, proposed for use in TeleActive
Bdale Garbee [Mon, 21 May 2018 13:49:03 +0000 (07:49 -0600)]
add more things to ignore in mechancial subtree
Bdale Garbee [Mon, 21 May 2018 13:48:20 +0000 (07:48 -0600)]
various design files from Pelican for the 1170 case used for TeleLCO
Bdale Garbee [Mon, 21 May 2018 13:45:43 +0000 (07:45 -0600)]
datasheet for high-rel 1802
Bdale Garbee [Mon, 21 May 2018 13:43:07 +0000 (07:43 -0600)]
design data for cutting TeleFireEight ammo boxes
Bdale Garbee [Mon, 21 May 2018 13:30:12 +0000 (07:30 -0600)]
connecter used on some of Bdale's personal projects
Bdale Garbee [Mon, 21 May 2018 13:27:43 +0000 (07:27 -0600)]
add script used to generate g-code for cutting TeleBT boxes
Bdale Garbee [Mon, 21 May 2018 13:25:21 +0000 (07:25 -0600)]
add script for generating g-code to cut TeleDongle boxes
Bdale Garbee [Sun, 20 May 2018 01:17:40 +0000 (19:17 -0600)]
1170 panel as per second full print
Bdale Garbee [Wed, 16 May 2018 04:52:03 +0000 (22:52 -0600)]
add Thingiverse links to mechanical Notebook file
Bdale Garbee [Wed, 16 May 2018 04:49:03 +0000 (22:49 -0600)]
set bracket hole diameter for M3 brass insert
Bdale Garbee [Wed, 16 May 2018 04:44:53 +0000 (22:44 -0600)]
angle brackets for mounting panel in TeleLCO
Bdale Garbee [Tue, 15 May 2018 22:47:58 +0000 (16:47 -0600)]
correct STM32L152 part number, add Cree blue LED
Bdale Garbee [Tue, 15 May 2018 00:24:31 +0000 (17:24 -0700)]
added nibs for LED bodies
Bdale Garbee [Mon, 14 May 2018 21:50:17 +0000 (14:50 -0700)]
first cut at panel surface completed
Bdale Garbee [Mon, 14 May 2018 19:49:02 +0000 (12:49 -0700)]
LCD openings and encoder shaft positioned, overall size set
Bdale Garbee [Sun, 13 May 2018 02:55:15 +0000 (19:55 -0700)]
start a mechanical parts tree with the powerpole mount for TeleFire products
Bdale Garbee [Thu, 10 May 2018 23:11:43 +0000 (16:11 -0700)]
add an 8-position standard, high reliability DIP switch for TeleFire
Bdale Garbee [Thu, 10 May 2018 23:11:17 +0000 (16:11 -0700)]
add symbol for an 8-way standard dip switch for use on TeleFire
Bdale Garbee [Thu, 10 May 2018 22:59:50 +0000 (15:59 -0700)]
data sheet for dip switch used on TeleFire boards
Bdale Garbee [Tue, 8 May 2018 19:58:52 +0000 (12:58 -0700)]
add 3mm through-hole LEDs to pref parts list for TeleLCO
Bdale Garbee [Tue, 1 May 2018 21:38:48 +0000 (15:38 -0600)]
data sheet for rotary on/off switch on TeleLCO
Bdale Garbee [Mon, 2 Apr 2018 19:27:34 +0000 (13:27 -0600)]
data sheet for Pelican 1170 case proposed for use with TeleLCO
Bdale Garbee [Fri, 30 Mar 2018 04:02:55 +0000 (22:02 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 30 Mar 2018 04:02:31 +0000 (22:02 -0600)]
move to STM32L152VCT6 on telelco (only user of the L152)
Keith Packard [Thu, 29 Mar 2018 18:11:58 +0000 (11:11 -0700)]
Add cree LED data sheet for blue/green colors
we had the red/yellow one already.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 27 Mar 2018 21:37:36 +0000 (15:37 -0600)]
lose slotdef, slot attribs on syms that don't have slots (telefireeight)
Bdale Garbee [Wed, 21 Mar 2018 16:00:30 +0000 (10:00 -0600)]
data sheet for power switch on TeleLCO
Bdale Garbee [Wed, 21 Mar 2018 15:57:02 +0000 (09:57 -0600)]
data sheet for switches on TeleLCOTwo
Bdale Garbee [Wed, 21 Mar 2018 04:14:23 +0000 (22:14 -0600)]
data sheet for LCD display digits used on TeleLCO
Bdale Garbee [Wed, 21 Mar 2018 03:07:05 +0000 (21:07 -0600)]
data sheet for Grayhill optical encoder we've selected for TeleLCO
Bdale Garbee [Tue, 20 Mar 2018 21:14:26 +0000 (15:14 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Tue, 20 Mar 2018 21:14:03 +0000 (15:14 -0600)]
add an un-copyrighted title-B.sym
Keith Packard [Wed, 14 Mar 2018 06:42:34 +0000 (23:42 -0700)]
Add quick-connect symbol
Keith Packard [Mon, 12 Mar 2018 02:52:14 +0000 (19:52 -0700)]
rename 3568.5c to fuse3568.5c
Makes the footprint name a bit more distinct.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 3 Mar 2018 18:05:14 +0000 (11:05 -0700)]
micro USB is on 16mm reel
Bdale Garbee [Fri, 2 Mar 2018 15:59:16 +0000 (08:59 -0700)]
add ADXL375 to preferred parts db
Bdale Garbee [Sun, 25 Feb 2018 23:10:56 +0000 (16:10 -0700)]
swap power pins on ADXL375 symbol for compatibility with existing schematics
Bdale Garbee [Sun, 25 Feb 2018 23:06:07 +0000 (16:06 -0700)]
schematic symbol and footprint for ADXL375
Bdale Garbee [Sun, 25 Feb 2018 22:16:28 +0000 (15:16 -0700)]
remove ADXL377 data sheet .. 375 with SPI vs analog output better for us
Bdale Garbee [Sun, 25 Feb 2018 22:14:04 +0000 (15:14 -0700)]
updated version of ADXL375 data sheet
Bdale Garbee [Thu, 15 Feb 2018 22:22:35 +0000 (15:22 -0700)]
eliminate duplicate/old entry
Bdale Garbee [Thu, 15 Feb 2018 22:16:37 +0000 (15:16 -0700)]
updated pref parts due to availability for TeleMetrum build
Bdale Garbee [Thu, 15 Feb 2018 19:09:08 +0000 (12:09 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Thu, 15 Feb 2018 19:08:57 +0000 (12:08 -0700)]
typo -- needs to be a tab
Bdale Garbee [Thu, 15 Feb 2018 19:07:05 +0000 (12:07 -0700)]
Mouser is the only one with STM32L151CBU6 stock right now
Bdale Garbee [Mon, 8 Jan 2018 01:30:06 +0000 (22:30 -0300)]
2x26 pin header on 100mil centers for AMSAT LTI project
Bdale Garbee [Sun, 7 Jan 2018 01:22:32 +0000 (22:22 -0300)]
add datasheet for stacking headers to be used on AMSAT LTI card
Bdale Garbee [Mon, 1 Jan 2018 06:31:51 +0000 (23:31 -0700)]
data sheets for u-blox products we might use someday
Keith Packard [Sat, 30 Dec 2017 18:45:57 +0000 (10:45 -0800)]
Add mcp6541ut to preferred parts and datasheets
This is a comparator to replace the tsv521 which is no longer available.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 24 Dec 2017 19:38:20 +0000 (12:38 -0700)]
updated data sheets for interesting GPS chip antennas from Johanson
Bdale Garbee [Tue, 19 Dec 2017 19:05:50 +0000 (12:05 -0700)]
0.075 mm is closer to 3mils than 10, and 10 was clearly too much!
Bdale Garbee [Thu, 30 Nov 2017 05:41:24 +0000 (22:41 -0700)]
make the stencil target work for current pcb-rnd
Bdale Garbee [Sun, 12 Nov 2017 16:21:45 +0000 (09:21 -0700)]
more work on pcb-rnd makefile
Bdale Garbee [Fri, 10 Nov 2017 22:15:19 +0000 (15:15 -0700)]
eliminate MPU9250 footprint in favor of ufqfpn24
Keith Packard [Fri, 10 Nov 2017 22:11:58 +0000 (14:11 -0800)]
Have ufqfpn24 pads extend 0.4mm outside of package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 22:10:22 +0000 (14:10 -0800)]
Remove silk rectangle around ufqfpn24 package
This was just for validation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 21:40:23 +0000 (13:40 -0800)]
Add ufqfpn24 footprint (for MPU9250)
This is a 3mmx3mm 24-pin package with 0.4mm spacing and no central
pad. The corner pads are beveled by overlapping four pads to preserve
process spacing between them. The resulting spacing is about 8.4 mils
(0.21mm).
Solder mask is set to 0.05mm as specified in the MPU9250 docs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 20:42:10 +0000 (12:42 -0800)]
Add a couple of alternate USBmicroB connectors
This makes it slightly easier to generate parts lists and track what
we used to build boards by just changing the value in the schematic.
Signed-off-by: Keith Packard <keithp@keithp.com>