]>
git.gag.com Git - hw/altusmetrum/log
Keith Packard [Mon, 28 Sep 2015 15:15:01 +0000 (10:15 -0500)]
symbols/spdt: 'passive' isn't a valid pin type; 'pas' is the right one
Using an invalid pin type generates terrible exceptions from the drc2
checking function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Sep 2015 15:14:02 +0000 (10:14 -0500)]
scheme: Add gnet-drcam.scm
Forked from drc2, this adds checking for valid pintypes so that the
unconnected pin tests don't cause an exception with uninterpretable
backtrace.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 29 Sep 2015 00:30:50 +0000 (17:30 -0700)]
packages: Add footprint for vbrite edge-launch connectors (including BNC)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 29 Sep 2015 00:28:15 +0000 (17:28 -0700)]
packages: Add phoenix giant screw terminal footprints
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 13 Sep 2015 04:09:29 +0000 (21:09 -0700)]
Add title-E-both symbol
This has copyrights for both hackers
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 12 Sep 2015 18:43:02 +0000 (11:43 -0700)]
Update TPS709 datasheet to Rev F.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 8 Jul 2015 17:21:03 +0000 (11:21 -0600)]
7805 symbol in TO-252AA package by default
Bdale Garbee [Wed, 8 Jul 2015 16:19:21 +0000 (10:19 -0600)]
more stuff for test stand, including TO-252AA symbol+footprint, INA125 symbol
Bdale Garbee [Sun, 21 Jun 2015 00:46:10 +0000 (18:46 -0600)]
add more attributes to partslistgag for AC BOM creation
Bdale Garbee [Tue, 26 May 2015 03:00:55 +0000 (21:00 -0600)]
footprint for CR2032 battery holder
Bdale Garbee [Tue, 26 May 2015 02:48:18 +0000 (20:48 -0600)]
data sheet for CR2032 battery holder used on greenhouse board
Bdale Garbee [Tue, 19 May 2015 22:12:52 +0000 (16:12 -0600)]
Raspberry Pi v2 GPIO header, 40 pin, plus typo fix in 26 pin header
Bdale Garbee [Tue, 19 May 2015 22:04:08 +0000 (16:04 -0600)]
old-style Raspberry Pi header, 26 pin
Bdale Garbee [Tue, 19 May 2015 18:04:10 +0000 (12:04 -0600)]
40 pin header for R-PI v2 GPIO / HAT boards
Bdale Garbee [Tue, 19 May 2015 17:39:22 +0000 (11:39 -0600)]
rename symbol dir for consistency with datasheets, add 24C32 datasheet
Bdale Garbee [Tue, 19 May 2015 17:37:30 +0000 (11:37 -0600)]
new symbol for Raspberry PI "HAT" EEPROM parts
Bdale Garbee [Sat, 18 Apr 2015 19:52:44 +0000 (13:52 -0600)]
footprint for diode used in greenhouse project relay snubbers
Bdale Garbee [Sat, 18 Apr 2015 19:08:28 +0000 (13:08 -0600)]
footprint for relay used in greenhouse project
Bdale Garbee [Fri, 17 Apr 2015 18:18:33 +0000 (12:18 -0600)]
footprint for fuse holder
Bdale Garbee [Fri, 17 Apr 2015 18:14:47 +0000 (12:14 -0600)]
footprint for littlefuse pcb-mount fuse holder - greenhouse project
Bdale Garbee [Fri, 17 Apr 2015 17:27:30 +0000 (11:27 -0600)]
general purpose rectifier data sheet for transistor relay drivers
Bdale Garbee [Fri, 17 Apr 2015 17:20:57 +0000 (11:20 -0600)]
5v coil AC contact relays for greenhouse project
Bdale Garbee [Fri, 17 Apr 2015 17:11:28 +0000 (11:11 -0600)]
10-bit A/D with I2C interface - greenhouse light sensor
Bdale Garbee [Fri, 17 Apr 2015 17:09:35 +0000 (11:09 -0600)]
photocell data sheet - greenhouse light sensor
Bdale Garbee [Fri, 3 Apr 2015 01:27:12 +0000 (19:27 -0600)]
footprint for 4ucon 12x12 mm push-button switches
Bdale Garbee [Fri, 3 Apr 2015 01:16:39 +0000 (19:16 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 3 Apr 2015 01:16:22 +0000 (19:16 -0600)]
meh
Bdale Garbee [Fri, 3 Apr 2015 01:12:50 +0000 (19:12 -0600)]
data sheet for 4ucon 12x12 mm push-button switches 20571, 18573
Bdale Garbee [Tue, 24 Mar 2015 09:07:01 +0000 (10:07 +0100)]
cobble up a USA-standard 5-way Stratocaster switch symbol
Bdale Garbee [Tue, 24 Mar 2015 08:44:56 +0000 (09:44 +0100)]
DPDT switch symbol pulled from gedasymbols.org
Bdale Garbee [Tue, 24 Mar 2015 08:41:12 +0000 (09:41 +0100)]
hard to believe we haven't ever used a potentiometer in a schematic...
Keith Packard [Fri, 20 Mar 2015 20:28:40 +0000 (13:28 -0700)]
Split out usb A male footprint into two styles
On using a hole for the clips, one designed to wrap around the board
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 20 Mar 2015 20:28:13 +0000 (13:28 -0700)]
Revert "Rework the usbAmale footprint to use pads near the edge of the board"
This reverts commit
699bbfa097847f00e3c951f7b9eabb46194d53b4 .
Keith Packard [Fri, 20 Mar 2015 20:28:04 +0000 (13:28 -0700)]
Revert "Fix USB A connector pads to expose copper"
This reverts commit
d59ca2f81a59ac11b4515a8cc6eb2ddf3439e9c6 .
Keith Packard [Fri, 20 Mar 2015 20:26:06 +0000 (13:26 -0700)]
Fix USB A connector pads to expose copper
This was mis-specified causing the solder mask to nearly cover the pad
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 20 Mar 2015 20:25:41 +0000 (13:25 -0700)]
Add pin 1 marking for s-pwson-n8 package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 20 Mar 2015 20:24:43 +0000 (13:24 -0700)]
Add footprint and data sheet for ti TPS71401
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 3 Mar 2015 23:54:56 +0000 (16:54 -0700)]
data sheet for new meas spec temp/pres/humidity sensor
Keith Packard [Wed, 25 Feb 2015 06:28:24 +0000 (22:28 -0800)]
Add value to 3904 transistor symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 25 Feb 2015 06:27:58 +0000 (22:27 -0800)]
Add packages used by usbtrng
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 25 Feb 2015 06:22:30 +0000 (22:22 -0800)]
Rework the usbAmale footprint to use pads near the edge of the board
This places ink on the top of the board to show where the tabs are
going to line up on the edge of the board, and places metal on the
solder side of the board to provide something to attach the tabs to
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 23 Feb 2015 00:46:42 +0000 (16:46 -0800)]
SOD323 diode footprint needs cathode on pin 2, not pin 1
The cathode marker was a small dot, which could easily get lost, and
it was on the wrong pin. Make it a nice line that is next to pin 2.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 20:50:11 +0000 (21:50 +0100)]
Add datasheet for On Semiconductor NSR0240H0D schottky diode
Candidate for usbtrng.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 20:43:18 +0000 (21:43 +0100)]
Add application note for AP3012 boost converter
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 14:57:39 +0000 (15:57 +0100)]
Add NXP PMBT3904VS dual NPN transistor
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:39:59 +0000 (06:39 +0100)]
Add AP3012 boost regulator symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:39:45 +0000 (06:39 +0100)]
Add 5-pin connector symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:39:28 +0000 (06:39 +0100)]
Add STM32F042-28 (28-pin QFN) symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:38:58 +0000 (06:38 +0100)]
remove bogus GND pin from STM32L151-48 symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:37:43 +0000 (06:37 +0100)]
Add 5-hole 50mil pin header footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:37:16 +0000 (06:37 +0100)]
Add ufqfpn-28 package (4x4 mm)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:36:06 +0000 (06:36 +0100)]
Add DIP16 package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:35:04 +0000 (06:35 +0100)]
Add MicroChip MCP601 op-amp datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:34:35 +0000 (06:34 +0100)]
Add Liteon 7-segment LED datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:34:05 +0000 (06:34 +0100)]
Add AP3012 boost regulator data sheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:33:48 +0000 (06:33 +0100)]
Add ATtiny 25/45/85 datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 24 Jan 2015 04:25:59 +0000 (20:25 -0800)]
Add 7-segment LED display symbol (uses DIP14 footprint)
Bdale Garbee [Mon, 26 Jan 2015 05:27:51 +0000 (22:27 -0700)]
footprints for 1802 project, symbols for greenhouse board
Bdale Garbee [Sat, 24 Jan 2015 21:00:45 +0000 (14:00 -0700)]
multi-digit 7-segment LED displays
Bdale Garbee [Sat, 24 Jan 2015 19:33:56 +0000 (12:33 -0700)]
try to fix the hex keypad symbol, rename footprint
Bdale Garbee [Sat, 24 Jan 2015 18:25:14 +0000 (11:25 -0700)]
another broken symbol thanks to a trailing blank line .. argh
Bdale Garbee [Sat, 24 Jan 2015 18:05:52 +0000 (11:05 -0700)]
wow, gschem is picky about trailing blank lines in symbols .. who knew?
Bdale Garbee [Sat, 24 Jan 2015 18:03:23 +0000 (11:03 -0700)]
add datasheet attributes to recent symbols
Bdale Garbee [Sat, 24 Jan 2015 17:59:40 +0000 (10:59 -0700)]
more parts for 1802 project
Bdale Garbee [Sun, 18 Jan 2015 01:14:43 +0000 (14:14 +1300)]
sram, bus transceiver for ELF project
Bdale Garbee [Wed, 14 Jan 2015 01:37:20 +0000 (14:37 +1300)]
flesh out hex keypad footprint approximation, put 3 Mhz crystal datasheet back
Bdale Garbee [Wed, 14 Jan 2015 01:01:11 +0000 (14:01 +1300)]
need 6 Mhz rock for 3 Mhz CPU clock
Bdale Garbee [Tue, 13 Jan 2015 23:04:12 +0000 (12:04 +1300)]
working on 1802 system
Bdale Garbee [Tue, 13 Jan 2015 10:32:21 +0000 (23:32 +1300)]
update copyright year in title blocks
Keith Packard [Sun, 28 Dec 2014 23:10:19 +0000 (15:10 -0800)]
Replace the static part label with the value field instead
This lets you easily see and edit it in the schematic.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 28 Dec 2014 08:50:52 +0000 (01:50 -0700)]
fix busted pad reference on Rayson footprint
Keith Packard [Wed, 24 Dec 2014 10:50:28 +0000 (02:50 -0800)]
Add symbol for STM32F042 in LQFP package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:49:56 +0000 (02:49 -0800)]
Add symbol for micron N25Q u-pdfn-8 flash part
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:49:32 +0000 (02:49 -0800)]
Add symbol for microchip mcp601 op-amp
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:48:56 +0000 (02:48 -0800)]
Add schematic symbol for diodes inc AP3015 boost regulator
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:47:57 +0000 (02:47 -0800)]
Add datasheet for diodes inc DFSL130
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:46:04 +0000 (02:46 -0800)]
Remove bogus CC1175 label from CC1175 symbol
We want this as the value, not a random text string
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:45:15 +0000 (02:45 -0800)]
Add footprints for PCB-based USB connector and u-pdfn package from micron
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:44:37 +0000 (02:44 -0800)]
Add LQFP-32 footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:43:11 +0000 (02:43 -0800)]
Move STM32F042 docs to sub directory
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 04:25:33 +0000 (20:25 -0800)]
Add datasheet for Diodes Inc AP3015 boost regulator
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 04:23:18 +0000 (20:23 -0800)]
Add docs for STM32F042 parts
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 14 Nov 2014 17:57:26 +0000 (09:57 -0800)]
Add symbol for TI DRV8838
Same as the DRV8837, except for different input definitions
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 14 Nov 2014 17:56:46 +0000 (09:56 -0800)]
Replace TI DRV8837 datasheet with DRV883x
This datasheet covers both the DRV8837 and DRV8838, which differ only
in the input controls
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 17:57:47 +0000 (09:57 -0800)]
Move origin to center of the board edge
This makes locating the part along the edge of the board easier
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 17:57:28 +0000 (09:57 -0800)]
Add Nordic nRF8001 symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 16:10:16 +0000 (08:10 -0800)]
Add datasheet for Nordic nRF8001 BTLE chip
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 00:17:25 +0000 (16:17 -0800)]
Add on-board USB type A male connector
This provides a footprint for a PCB-based USB Type A connector, which
can be used without a shell. Note that this does want to sit on a 2mm
board if possible, but 1.6mm should work fine in most cases.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 00:16:35 +0000 (16:16 -0800)]
Make QFNs have square pads by default
Cutting stencils with round pads doesn't work, so just make the pads
square. In theory, this could cause soldering issues, but we've never
seen any trouble.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 27 Oct 2014 02:56:57 +0000 (19:56 -0700)]
Add packages and symbols for TeleFire
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 27 Oct 2014 02:05:14 +0000 (19:05 -0700)]
Add symbols for TeleLCO
STM32L152, MIC5235, rotary switch, spst switch and lcd digit from lumex
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 27 Oct 2014 02:03:57 +0000 (19:03 -0700)]
Add a bunch of TI datasheets
cc1101
cc1120-user-guide
cc1175
74hc165
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 27 Oct 2014 01:49:03 +0000 (18:49 -0700)]
Add CC1200 and CC1175 symbols
Keith Packard [Sun, 5 Oct 2014 02:31:08 +0000 (19:31 -0700)]
Add docs for cc1200
Bdale Garbee [Mon, 18 Aug 2014 00:58:46 +0000 (18:58 -0600)]
data sheet for the cc1175
Bdale Garbee [Mon, 18 Aug 2014 00:56:45 +0000 (18:56 -0600)]
cc1200 data sheet and 70cm ref design
Bdale Garbee [Thu, 14 Aug 2014 03:36:26 +0000 (21:36 -0600)]
screw terminals Bdale likes for ebay bulkheads, 3.5mm spacing
Bdale Garbee [Mon, 14 Jul 2014 20:38:20 +0000 (14:38 -0600)]
more data sheets
Bdale Garbee [Mon, 14 Jul 2014 20:37:29 +0000 (14:37 -0600)]
add footprint generator for audio amp
Bdale Garbee [Mon, 14 Jul 2014 20:34:08 +0000 (14:34 -0600)]
stuff for usbclassd