David Brownell [Sun, 7 Feb 2010 03:16:21 +0000 (19:16 -0800)]
ADIv5: doxygen
Provide doxygen for many of the public ADIv5 interfaces (i.e. the ones
called from Cortex core support code).
Add FIXMEs (and a TODO) to help resolve implementation issues which
became more apparent when trying to document this code:
- Error-prone context-sensitivity (queued/nonqueued) in many procedures.
- Procedures that lie by ignoring errors and wrongly claiming success.
Also, there was no point in a return from dap_ap_select(); it can't fail,
and no caller checks its return status. Clean that up, make it void.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Fri, 5 Feb 2010 13:38:26 +0000 (14:38 +0100)]
zy1000: complete zy1000_uart to jim command switch
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Thu, 4 Feb 2010 22:39:51 +0000 (14:39 -0800)]
ARMv7-M: make DAP commands verify target is an ARMv7-M
Init the ARMv7-M magic number. Define predicate verifying it.
Use it to resolve a lurking bug/FIXME: make sure the ARMv7-M
specific DAP ops reject non-ARMv7-M targets.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 4 Feb 2010 19:10:15 +0000 (11:10 -0800)]
Documentation: mention bug database
Have the User's Guide and BUG handling notes both reference
the fact that we now have a bug database at SourceForge.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 4 Feb 2010 18:50:24 +0000 (10:50 -0800)]
JLink: reference protocol documentation
Segger publishes some documentation on this protocol;
reference it, so future maintainers can know it exists.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Spencer Oliver [Thu, 4 Feb 2010 10:33:33 +0000 (10:33 +0000)]
CMD: duplicate cmd error msg
When registering cmds we report duplicate attempts to register a cmd
as a LOG_ERROR.
Some situations need this, such as when registering dual flash banks.
http://www.mail-archive.com/openocd-development@lists.berlios.de/msg11152.html
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Ethan Eade [Thu, 4 Feb 2010 09:25:44 +0000 (10:25 +0100)]
scripts: Phytec/LPC2350 config scripts
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Spencer Oliver [Wed, 3 Feb 2010 13:08:42 +0000 (13:08 +0000)]
JTAG: fix bug when no interface connected
- fix coredump when OpenOCD is started without a jtag interface connected.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Harald Kipp [Tue, 2 Feb 2010 19:09:53 +0000 (11:09 -0800)]
AT91R40008/Ethernut 3 configuration
Moved board specific settings from target/at91r40008.cfg to a new
file board/ethernut3.cfg.
Set correct CPUTAPID. Reset delay increased, see MIC2775 data sheet.
Increased work area size from 16k to 128k.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Tue, 2 Feb 2010 18:53:13 +0000 (10:53 -0800)]
NOR: User's Guide updates
Remove long-obsolete text about "erase_check" affecting "flash info" output.
Move parts of that text to "protect_check", where it's still relevant; and
update the "flash info" description to mention the issue.
(This is still awkward. It might be best to make "protect_check" mirror
"erase_check" by dumping what it finds, so "flash info" doesn't dump any
potentially-stale cache info.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Edgar Grimberg [Tue, 2 Feb 2010 12:17:26 +0000 (13:17 +0100)]
tcl/str7x: Reset init unlocks the flash
For STR7x flash, the device cannot be queried for the protect status.
The solution is to remove the protection on reset init. The driver
also initialises the sector protect field to unprotected.
[dbrownell@users.sourceforge.net: line length shrinkage]
Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Edgar Grimberg [Tue, 2 Feb 2010 09:39:52 +0000 (10:39 +0100)]
flash/str7x: After reset init the flash is unlocked
The default state of the STR7 flash after a reset init is unlocked.
The information in the flash driver now reflects this.
The information about the lock status cannot be read from the
flash chip, so the user is informed that flash info might not
contain accurate information.
[dbrownell@users.sourceforge.net: line length shrinkage]
Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Nicolas Pitre [Tue, 2 Feb 2010 05:05:42 +0000 (00:05 -0500)]
ARM semihosting: fix EOF handling with SYS_READ
The semihosting interface has a strange convention for read/write where
the unused amount of buffer must be returned. We failed to return the
total buffer size when the local read() call returned 0.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Edgar Grimberg [Fri, 29 Jan 2010 08:46:11 +0000 (09:46 +0100)]
Test cases ran on v0.4.0-rc1
Test cases ran on v0.4.0-rc1 for a number of targets:
AT91FR40162
LPC2148
SAM7
STR710
STR912
The goal of the testing session was to prove basic functionality of OpenOCD for different targets.
Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Øyvind Harboe [Sun, 31 Jan 2010 20:02:06 +0000 (21:02 +0100)]
gdb: restore behavior from 0.3.1 for srst_asserted and power_restore
srst_asserted and power_restore can now be overriden to do
nothing. By default they will "reset init" the targets and
halt gdb.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Sun, 31 Jan 2010 22:16:53 +0000 (14:16 -0800)]
ADIv5: more messaging cleanup, docs
When the TAR cache was explicitly invalidated, don't bother
printing it; the actual hardware status is more informative.
Provide some doxygen for the MEM-AP setup routine.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Sun, 31 Jan 2010 14:48:14 +0000 (15:48 +0100)]
build: fix problems with "struct stat" not being defined under eCos
Include <sys/stat.h> according to
http://www.opengroup.org/onlinepubs/
000095399/functions/stat.html
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 21 Jan 2010 15:41:54 +0000 (16:41 +0100)]
telnet: fix strage blank spaces at beginning of telnet lines
Sometimes we saw two strange blank spaces at the beginning
of the telnet lines.
progress
ogress
>
This patch fixes this problem:
progress
progress
>
The code changes are *reasonably* clean, but perhaps it could be
made a bit more elegant, but I didn't want to change things after
I finished diagnosis/testing & submitting the patch.
The problem was that logging can send the text and the newline
separately in two different requests and the telnet code would
incorrectly remove the prompt from the end of a line.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Sun, 31 Jan 2010 08:26:21 +0000 (00:26 -0800)]
Subject: ADIv5: fix more diagnostics
If the MEM-AP cache is invalid, don't display it; just report that
invalidity as an error. (This bug has been observed with "mdw 0 32"
after just a "reset halt". Some code is being wrongly bypassed...)
If it's valid, display that cache at DEBUG level, not ERROR. Also,
don't assume it's an AHB-AP; it could be another flavor of MEM-AP.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 31 Jan 2010 06:40:50 +0000 (22:40 -0800)]
ADIv5 error checking for Tcl commands
Reject invalid AP numbers (256+) as Tcl operation parameters.
Shrink one of the overlong lines.
Add my copyright to the ADIv5 code (multiple contributions).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 31 Jan 2010 02:08:19 +0000 (18:08 -0800)]
ARM ADIv5: fix diagnostics for block writes
They were reporting "read" errors, not "write" errors.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 29 Jan 2010 22:31:19 +0000 (14:31 -0800)]
ADIv5: cleanup, rename swjdp_transaction_endcheck()
Make messages reference "DAP" if they're actually transport-agnostic, or
"JTAG-DP" when they're JTAG-specific. Saying SWJ-DP is often wrong (on
most Cortex-A8 chips) and is confusing even if correct (since we don't
yet support SWD).
Rename a JTAG-specific routine to jtagdp_transaction_endcheck() to highlight
that it's JTAG-specific, and that identify DAP clients undesirably depending
on JTAG. (They will all need to change for SWD support.)
Shrink a few overlong lines of code. Copy a comment from code removed
in a previous patch (for the ARMv7-M "dap baseaddr" command).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 29 Jan 2010 22:16:14 +0000 (14:16 -0800)]
ARMv7-M: use command handler for "dap baseaddr".
Make the ARMv7-M DAP code reuse the command handler for "dap baseaddr".
For some reason, this DAP command wasn't converted earlier.
This is a code shrink and simplification; it also removes a needless
transport dependency on JTAG.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 29 Jan 2010 21:52:08 +0000 (13:52 -0800)]
NOR: cleanup driver decls
Fix goofy struct indents. Function names *are* their addresses.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Alex Austin [Fri, 29 Jan 2010 06:41:44 +0000 (00:41 -0600)]
Clang buildfixes
Building with clang took a few very small changes. The change to
helper/log.h is because clang doesn't like an expression where the
result is unused. In helper/system.h, I just defined true and false
since clang doesn't have them builtin.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 28 Jan 2010 22:03:29 +0000 (14:03 -0800)]
doc clarifications for server flags
The "-f" is a shortcut for "-c" ... and providing any "-c" options
means the "openocd.cfg" file isn't implicitly used. Both the User's
Guide and the manual page were weak on these points, which has led
to some confusion.
Also update the manual page to include highlights of the search path
mechanism, including the facts that it exists and that "-s" adds to it.
Stop saying only the current directory is involved; the OpenOCD
script library is quite significant.
(Missing: complete manpage coverage of the search path, including a
FILES section listing all components and saying where the script
library is found.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 28 Jan 2010 21:58:20 +0000 (13:58 -0800)]
ARM: reference DPM defn from v6/v7 arch spec
The term "DPM" is probably not well known ("Device Power Management"?),
so identify its source in the current ARM architecture specification.
It's relevant to ARMv6, ARMv7-A, and ARMv7-R ... but not "M" profiles.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Spencer Oliver [Thu, 28 Jan 2010 21:05:09 +0000 (21:05 +0000)]
ARM semihosting: win32 and cygwin fixes
Cygwin would fail to reopen a previously written file if the mode is
not given.
Simplified converting the open flags and made sure the win32 O_BINARY
bit is set.
Added define for systems that do not support O_BINARY.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 27 Jan 2010 21:20:18 +0000 (21:20 +0000)]
ARM semihosting: fix writing to stdout
SYS_FLEN would be called before a write on a descriptor to check its size.
Currently lseek would fail with -1 when given the stdout/stderr descriptor.
Changing to use fstat seems to be the standard way of handling this.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
David Brownell [Wed, 27 Jan 2010 21:47:48 +0000 (13:47 -0800)]
Cortex-M3: report lockup, and recover
ARMv7-M defines a "lockup" state that's entered in certain double
fault sequences which can't be recovered from without external help.
OpenOCD has previously ignored this.
Issue a diagnostic saying the chip has locked up, and force exit
from this state by halting the core. It's not clear this is the
best way to handle lockup; but there should now be less confusion.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 27 Jan 2010 21:40:05 +0000 (13:40 -0800)]
ARM ADIv5: messaging tweaks
Add space missing after the invalid ACK value. On init, say
which AP is being used, and don't assume it's an AHP-AP.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 27 Jan 2010 21:24:21 +0000 (13:24 -0800)]
Cortex-A8: debug messaging tweaks
Make that "TODO" message say what needs to be done.
Say what part of examining failed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 27 Jan 2010 02:09:27 +0000 (18:09 -0800)]
various: don't mention wiki
The openfacts.berlios wiki isn't particularly current, and isn't
publicly editable.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 27 Jan 2010 01:54:49 +0000 (17:54 -0800)]
cygwin buildfix
isspace() parameter must be an integer, else a 'char' gets
used as an array index (sigh).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
simon qian [Sat, 23 Jan 2010 20:08:47 +0000 (04:08 +0800)]
SVF: all content between parentheses is one parameter
More SVF fixes:
* Treat all content between parentheses as part of the same
parameter; don't (wrongly) treat whitespace as a delimiter.
* Use isspace() to catch that whitespace; it's not all single
spaces, newlines etc are also valid.
* When parsing bitstrings, strip leading whitespace too.
So for example, these are equivalent and should (now) be OK:
"TDI( 1234 )"
"TDI( 1 2 3 4 )"
"TDI(00 12 34 )"
"TDI(
00 12
34)"
[dbrownell@users.sourceforge.net: comment updates; trivial cleanup]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Edgar Grimberg [Mon, 25 Jan 2010 15:34:27 +0000 (16:34 +0100)]
core arm11: Silence logs at level 3 if there is no activity
If the target and openocd are idling, the log should normally
be silent at level 3. (Given no verbose logging options.)
Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
simon qian [Sun, 17 Jan 2010 20:56:08 +0000 (04:56 +0800)]
SVF: insert space before '(' and after ')'
See http://forum.sparkfun.com/viewtopic.php?p=90983#90983 for discussion;
basically, the SVF parser wrongly expects "TDI (123)" but the space is
optional and it should accept "TDI(123)" too.
In the same way, "TDI(123)TDO(456)" should work too.
Rather than update the command parsing, this just makes sure the expected
spaces are present.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sat, 23 Jan 2010 06:54:39 +0000 (22:54 -0800)]
EmbeddedICE - fix Feroceon/Dragonite message
The breakpoint/watchpoint message was wrong for Feroceon and
Dragonite, which have only one working watchpoint unit.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sat, 23 Jan 2010 06:49:42 +0000 (22:49 -0800)]
NEWS updates
Summarize most ARM11 and Cortex-A8 updates as "acting much more
like other ARMs", and mention code sharing.
Clarify a few other points, including support for "reset-assert"
on all ARMs except Cortex-M (which doesn't exactly need it).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sat, 23 Jan 2010 06:37:15 +0000 (22:37 -0800)]
ARM11: fix breakpoints with GDB
This fixes a bug whereby GDB's breakpoints weren't activated.
The root cause is a confused interface to resume(). Fix by
almost ignoring the "handle breakpoints" parameter; it only
seems related to the case of skipping breakpoint-at-PC.
Update a few coments to clarify what's happening.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 22 Jan 2010 00:45:00 +0000 (16:45 -0800)]
Various doc/comment updates
Doxygen: don't be needlessly verbose; alphabetically sort members
TODO: add random bits; clarify which manuals are referenced
ARM disassembler: mention a few opcodes that still aren't handled
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 22 Jan 2010 00:15:41 +0000 (16:15 -0800)]
User's Guide secton on target hardware setup
Highlight the needs to properly jumper development boards; to
make the OpenOCD configuration match the jumpering; and to have
a usable "reset-init" method when debugging early boot code.
Specific mention of the "ATX Mode" that seems useful on
many i.MX boards, forcing NAND boot.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 21 Jan 2010 21:39:22 +0000 (13:39 -0800)]
ADIv5 header cleanup (+ #defines)
Update the comments about DP registers and some of the bitfields.
Remove inappropriate (and unused) DP_ZERO declaration.
Add some (currently unused) #defines needed for SWD protocol support,
based on previous patches from Andreas Fritiofson and Simon Qian.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Thu, 21 Jan 2010 09:16:42 +0000 (10:16 +0100)]
target: print reason why GDB halts
If GDB halts unexpectedly, print reason: srst assert or power
out detected.
If polling fails, then things are a bit trickier. We do not
want to spam telnet or the log with polling failed messages.
Leave that case be w/a comment in a code for now.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Edgar Grimberg [Thu, 21 Jan 2010 11:08:19 +0000 (12:08 +0100)]
interface: Changed parport address to LPT1
Changed the parport address to LPT1, since it's the most obvious default value.
Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Edgar Grimberg [Thu, 21 Jan 2010 12:42:25 +0000 (13:42 +0100)]
target: Fixed format problem for mdh
Fixed format problem for mdh. It needs to display 4 chars.
Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Øyvind Harboe [Wed, 20 Jan 2010 22:36:57 +0000 (23:36 +0100)]
gdb_server: handle stepi/continue packet while target is running with more grace
Rather than issuing a halt and then stepi/resume, just
wait for target to halt.
Issue a sterner warning via gdb console that any gdb
register changes will be ignored in this case.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 21 Jan 2010 07:11:39 +0000 (08:11 +0100)]
ecos: add missing PRId8 definition
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Spencer Oliver [Wed, 20 Jan 2010 23:09:20 +0000 (23:09 +0000)]
BUILD: remove cygwin gcc 3.4.4 build warnings
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
David Brownell [Wed, 20 Jan 2010 19:07:42 +0000 (11:07 -0800)]
Cortex-M3 vector_catch testing support
The "cm3-ftest.cfg" can be used to verify that OpenOCD handles
certain faults correctly:
- Test #1: it ignores faults that it wasn't told to catch
- Test #2: if vector_catch is told to catch, it catches
The "fault.c" generates ASM code to trigger faults, while the
config script loads and runs pre-compiled code.
This covers most, but not all, of the vector_catch options.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 20 Jan 2010 18:46:53 +0000 (10:46 -0800)]
board configs -- unique names for flash chips
Don't give the same names to both flash chips on two OMAP boards.
For OSK, enable DCC downloads (removing a warning).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 20 Jan 2010 18:43:32 +0000 (10:43 -0800)]
gdb_server: correctly report flash sector sizes
Report each region of same-size sectors separately, instead of
incorrectly reporting that every sector has the same size.
This is a longstanding bug on NOR flash chips with non-uniform
sector sizes. It was largely hidden by other bugs in flash
handling. When some of those were recently fixed, this one was
exposed as a regression on str710.
[oyvind.harboe@zylin.com: update the loop to behave on str7 ]
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Michael Grzeschik [Wed, 20 Jan 2010 18:06:13 +0000 (19:06 +0100)]
tcl/target/at91sam3u4e.cfg: changed case in dependent file
openocd does not start with the target configfile due to the case in the
dependent config file.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Wed, 20 Jan 2010 14:11:09 +0000 (15:11 +0100)]
testing: fix str710 test case now builds
Make the test case easily adjustable in size. str710
has very peculiar flash sector layout, nice for testing,
but a larget test_rom.elf is required.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 20 Jan 2010 12:04:56 +0000 (13:04 +0100)]
arm7/9: add nags upon reset about options to improve performance
arm7_9 fast_memory_access and working area nags added.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Spencer Oliver [Tue, 19 Jan 2010 21:00:55 +0000 (21:00 +0000)]
ARMV7M: handle bkpt instruction on resume/step
Skip over a bkpt instruction if found on resume/step.
Only software breakpoints known to OpenOCD are currently handled.
So this handles the special case of either a user added bkpt
or library added, eg. semi-hosting support.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
David Brownell [Wed, 20 Jan 2010 08:04:17 +0000 (00:04 -0800)]
User's guide: mention lpc2000 checksum issue
Folk almost certainly want to have OpenOCD compute the checksum
when they modify the vector table. However, that almost guarantees
that "verify_image" will fail.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 20 Jan 2010 07:32:54 +0000 (23:32 -0800)]
gdb_server -- subroutinize memory map logic
Put the memory map logic into its own subroutine.
This will make it a bit easier to package bugfixes,
and simplifies the query packet handling.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 20 Jan 2010 07:30:36 +0000 (23:30 -0800)]
gdb_server -- symbol cleanup
Make most methods static; net minor object code shrink.
Likewise various data symbols; no net change.
Shrink some overlong lines.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Andreas Fritiofson [Sat, 21 Nov 2009 15:53:31 +0000 (16:53 +0100)]
update win32 script search path
The default script search path on Windows is out of date with
the current layout (from installation and documentation), which
makes the standard script library not be found after a normal
./configure && make && make install
under msys/MinGW. The same should hold true for cygwin native builds
(not verified).
Update search path to ../share/openocd/scripts not ../lib/openocd,
relative to the openocd executable.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Tue, 19 Jan 2010 21:56:33 +0000 (13:56 -0800)]
NOR: fix diagnostic
The "NOR: last_addr also needs correction when checking alignment"
patch omitted a necessary update to the key diagnostic; fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Mon, 18 Jan 2010 20:54:58 +0000 (21:54 +0100)]
zy1000: flush jtag buffer before changing speed
It is conceivable that there could be commands in the
queue when a speed change request comes in. Flush the
hw queue before changing speed. Not observed, found by
inspection.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 19 Jan 2010 08:46:49 +0000 (09:46 +0100)]
zy1000: print out PCB revision upon boot
Simplify debugging a bit.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 19 Jan 2010 08:47:21 +0000 (09:47 +0100)]
flash: add error messages upon incorrect arguments to flash iteration
According to OpenOCD error handling rules the error is
logged at where it occurs(same site where an exception
would have been thrown).
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Mon, 18 Jan 2010 21:17:05 +0000 (13:17 -0800)]
vsllink -- add comment
Previous patch deserved *inline* comment, not just
in git revision history.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Mon, 18 Jan 2010 13:45:08 +0000 (14:45 +0100)]
commands: allow scan_chain command to be executed during config
Adding taps and then dumping them is quite reasonable thing
to do in a config script.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
simon qian [Mon, 18 Jan 2010 07:37:15 +0000 (23:37 -0800)]
read target voltage first in vsllink
The very first command after init command should be "read target voltage".
This is a tweak for the Old Versaloon firmware. Without this, in most
most cases, it works. Under Ubuntu9.04, there is a chance that the USB
will fail. The problem disappears if I read target voltage first.
For the lastest Versaloon firmware, it's OK.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
richard vegh [Sat, 16 Jan 2010 20:27:45 +0000 (12:27 -0800)]
NAND: lpc3180 crashes on LPC3250
The LPC3180 NAND driver was crashing on some large page chips.
Fix:
- Crash and related functionality (don't memset too much OOB data)
- Some debug messages
- Command handling now works
[dbrownell@users.sourceforge.net: whitespace/linelength/message cleanup]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 15 Jan 2010 21:02:45 +0000 (13:02 -0800)]
ADIv5 improved diagnostic
Don't just complain about an invalid ACK; say what the
value was, to help troubleshooting.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 15 Jan 2010 20:53:26 +0000 (12:53 -0800)]
ARM DPM: disable some nyet-ready breakpoint code
Until we manage breakpoints at runtime (patches not ready for 0.4)
the only way this code should touch them is to disable them at server
startup (a previous debug session may have left them active).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 15 Jan 2010 17:36:01 +0000 (09:36 -0800)]
NEWS: include s3c64xx NAND driver
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 14 Jan 2010 22:38:24 +0000 (14:38 -0800)]
jtag.h whitespace/comment cleanup
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 14 Jan 2010 20:58:39 +0000 (12:58 -0800)]
ARM ADIv5: add comments
Add doxygen and other comments for what's more or less the lowest
level JDAG-DP primitive, to access JTAG_DP_{A,D}PACC registers.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 14 Jan 2010 20:45:58 +0000 (12:45 -0800)]
ARM7/ARM9: improved reset support
Teach most remaining ARM cores how to use the "reset-assert" event.
Same model as elsewhere: iff a handler is provided for that event,
use that instead of trying to assert SRST (which may be unavailable,
or inappropriate since it resets too much). Else no change.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Peter Korsgaard [Mon, 11 Jan 2010 21:59:29 +0000 (22:59 +0100)]
nand flash support for s3c64xx
Identical to the existing 2412/2443 support except for the base address
and NFCONF value (bit 2 is reserved and should be written as 1 ref UM).
Tested on a s3c6410 board, but controller is identical in 6400/6410
except for 8bit MLC ECC support in 6410 which isn't supported by the
driver.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Laurentiu Cocanu [Thu, 14 Jan 2010 12:59:36 +0000 (13:59 +0100)]
str9x.c: remove optimization when erasing the whole bank
Using the erase bank command will cause a time out error. Replacing
this with the erase sector bank will provide a slower but safer and
stable method to erase the flash.
Signed-off-by: Laurentiu Cocanu <laurentiu.cocanu@zylin.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Thu, 14 Jan 2010 11:16:07 +0000 (03:16 -0800)]
ARM7/9 minor cleanups
Shrink some overlong lines. Add my 2009 copyright.
Move a declaration to the beginning of its block.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Spencer Oliver [Thu, 14 Jan 2010 00:58:07 +0000 (00:58 +0000)]
GDB: change gdb_breakpoint_override to COMMAND_ANY
- enable gdb_breakpoint_override to be used within config script.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
David Brownell [Thu, 14 Jan 2010 07:33:53 +0000 (23:33 -0800)]
User's Guide updates
Capture various bits of useful information that have come up on the
list but haven't yet gotten into the documentation:
- Watchdog timers firing during JTAG debug need attention;
- Some chips have special registers to help JTAG debug;
- Cortex-M3 stepping example with IRQs and maskisr;
- Clarifications re adaptive clocking: not all ARMs do it, and
explain it a bit better.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 14 Jan 2010 07:33:25 +0000 (23:33 -0800)]
NOR: add optional "flash erase_address" sector padding
Add a NOR flash mechanism where erase_address ranges can be padded
out to sector boundaries, triggering a diagnostic:
> flash erase_address 0x0001f980 16
address range 0x0001f980 .. 0x0001f98f is not sector-aligned
Command handler execution failed
in procedure 'flash' called at file "command.c", line 647
called at file "command.c", line 361
>
> flash erase_address pad 0x0001f980 16
Adding extra erase range, 0x0001f800 to 0x0001f97f
Adding extra erase range, 0x0001f990 to 0x0001fbff
erased address 0x0001f980 (length 16) in 0.095975s (0.163 kb/s)
>
This addresses what would otherwise be something of a functional
regression. An earlier version of the interface had a dangerous
problem: it would silently erase data outside the range it was
told to erase. Fixing that bug turned up some folk who relied on
that unsafe behavior. (The classic problem with interface bugs!)
Now they can get that behavior again. If they really need it,
just specify "pad".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 13 Jan 2010 11:16:37 +0000 (03:16 -0800)]
Cortex-M3: improved core exception handling
This updates three aspects of debugger/exception interactions:
- Save the user's "vector_catch" setting, and restore it after reset.
Previously, it was obliterated (rather annoyingly) each time.
- Don't catch BusFault and HardFault exceptions unless the user says
to do so. Target firmware may need to handle them.
- Don't modify SHCSR to prevent escalating BusFault to HardFault.
Target firmware may expect to handle it as a HardFault.
Those simplifications fix several bugs. In one annoying case, OpenOCD
would cause the target to lock up on ome faults which triggered after
the debugger disconnected.
NOTE: a known remaining issue is that OpenOCD can still leave DEMCR
set after an otherwise-clean OpenOCD shutdown.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Mon, 11 Jan 2010 14:30:22 +0000 (15:30 +0100)]
arm7/9: enable check that DCC downloads have been enabled
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 11 Jan 2010 14:29:09 +0000 (15:29 +0100)]
arm7/9: add fn to check if dcc downloads have been enabled
DCC downloads should be enabled for any self repecting
openocd config file for arm7/9. Print out note about
it otherwise.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 11 Jan 2010 14:28:18 +0000 (15:28 +0100)]
target: add check_reset hook
Allow targets to run checks post reset. Used to check
that e.g. DCC downloads have been enabled.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 11 Jan 2010 08:22:08 +0000 (09:22 +0100)]
gdbserver: fix typo that broke read/write watchpoint
It looks like a bugfix from normal breakpoints was not
copied over.
Do not use clever mathematics and assumptions to convert from
GDB enum for break/watchpoints to OpenOCD enum.
Drop connection upon unknown breakpoint type, this code path
was not really considered by the previous code I think.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 11 Jan 2010 14:54:52 +0000 (15:54 +0100)]
debug: make logging of commands terser
one line / command instead of one line per argument.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Tue, 12 Jan 2010 20:40:39 +0000 (12:40 -0800)]
ARM: bugfix for "movt" disassembly
Use the correct bitfield to specify the register whose
top halfword gets replaced.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Vladimir Zapolskiy [Mon, 11 Jan 2010 14:49:37 +0000 (17:49 +0300)]
Added Openmoko USB JTAG interface config file.
Added interface config file for JTAG/RS232 debug board originally
integrated to Neo 1973 and Neo FreeRunner phones.
Adapter was tested with i.MX31, S3C2410 and AT91SAM9260 processors.
Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Øyvind Harboe [Mon, 11 Jan 2010 13:59:14 +0000 (14:59 +0100)]
target: return JIM_OK instead of ERROR_OK
No change in actual binary as JIM_OK == ERROR_OK,
but JIM_OK is correct here.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 11 Jan 2010 11:54:49 +0000 (12:54 +0100)]
reset: better error messages
Use correct tcl syntax to throw exception.
the syntax is "return -code error" not "return -error"
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 11 Jan 2010 11:53:55 +0000 (12:53 +0100)]
commands: make error messages a bit more terse
we don't need to know the build path of command.c when
reading normal user level error messages.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 11 Jan 2010 09:21:56 +0000 (10:21 +0100)]
zy1000: reset bugfix
flush JTAG FIFO before reset. Fixes RCLK problems observed
w/lpc2148, but really fixes a wider range of problems.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
David Brownell [Mon, 11 Jan 2010 08:14:01 +0000 (00:14 -0800)]
Doxygen file comments
Add file comments to a few files. Make the GDB server use
more conventional (pointer-free) hex digit conversion.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Fri, 8 Jan 2010 14:30:10 +0000 (15:30 +0100)]
shutdown: more graceful shutdown
Shutdown is not an error condition, do not return error
from main.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Spencer Oliver [Sun, 10 Jan 2010 14:30:06 +0000 (14:30 +0000)]
build: doxygen build
- Fix for building doxygen out of tree
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
David Brownell [Sun, 10 Jan 2010 18:06:58 +0000 (10:06 -0800)]
FreeBSD build fixes
Based on notes from Tomek Cedro <tomek.cedro@gmail.com> and
Steve Franks <bahamasfranks@gmail.com>.
In the User's Guide, sort the list of operating systems reported
through Tcl with $ocd_HOSTOS ... and include FreeBSD.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 10 Jan 2010 06:24:43 +0000 (22:24 -0800)]
Presto: doxygen fix
Newline needed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 10 Jan 2010 06:15:57 +0000 (22:15 -0800)]
jtag/tcl help/usage fixups
The usual: expand several helptexts to be more correct and to use
full sentences; make the usage messages use the same EBNF as the
User's Guide; use function names for their addresses.
Also add a comment about that odd jtag_command_handlers_to_move[] thing.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 10 Jan 2010 06:14:08 +0000 (22:14 -0800)]
ZY1000 help/usage fixups
The usual: same EBNF as in the User's Guide, full sentence helptext,
function names *are* their addresses.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 10 Jan 2010 06:09:08 +0000 (22:09 -0800)]
jtag: presto, parport help/usage updates
Presto: add doxygen file comment.
Parport: note a couple gaps in layout config.
Both: use the uniform EBNF for usage, bugfix helptexts, use function
name as its address not "&name".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>