]>
git.gag.com Git - fw/altos/log
Keith Packard [Thu, 16 Dec 2021 21:37:17 +0000 (13:37 -0800)]
ao-tools/ao-test-igniter: Deal with devices that use both 'apogee' for ADC
Some devices report drogue igniter ADC value with 'apogee' tag. Deal
with this.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Dec 2021 21:36:10 +0000 (13:36 -0800)]
micropeak: detect empty log received from device
Avoid reporting a failure to the user when the device has no flight
log.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 22 Dec 2021 18:35:52 +0000 (11:35 -0700)]
doc: add an appendix on frequency calibration to the all-in-one manual
Bdale Garbee [Mon, 20 Dec 2021 20:49:41 +0000 (13:49 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Mon, 20 Dec 2021 20:49:28 +0000 (13:49 -0700)]
need to capture .bin file for telebt loader, too
Bdale Garbee [Wed, 3 Nov 2021 19:24:41 +0000 (13:24 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Sat, 16 Oct 2021 23:27:52 +0000 (16:27 -0700)]
Version 1.9.10.1
AltosDroid fixes (rotation, crash in maps stuff)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 16 Oct 2021 22:48:22 +0000 (15:48 -0700)]
altosdroid: Fix tab updates on Android 11 after rotate
Android 11 appears to have "optimized" application rotation by
regenerating fragments automatically. This means the tab fragments
aren't getting created by TabsAdapter.getItem, so that code didn't
know about them, which caused it to not know which tab was active so
all of the application state wasn't getting updated in the tabs after
rotation.
Fix this by telling TabsAdapter about fragments that are already
created -- altosdroid hears about them in the registerTab hook.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 11 Oct 2021 06:01:18 +0000 (23:01 -0700)]
altosdroid: Skip map draw before transform is set
A crash report indicates that this can happen.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 11 Oct 2021 04:21:49 +0000 (22:21 -0600)]
fix version in 1.9.10 release notes
Keith Packard [Sun, 10 Oct 2021 16:57:45 +0000 (09:57 -0700)]
Version 1.9.10
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 10 Oct 2021 16:49:49 +0000 (09:49 -0700)]
altos/telemega-v5.0: Add .gitignore
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 10 Oct 2021 16:47:52 +0000 (09:47 -0700)]
doc: Version 1.9.10 notes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 10 Oct 2021 04:32:17 +0000 (21:32 -0700)]
altosdroid: Catch log file open failures and show an error dialog
Android changed which directories we can write to once, let's hope it
doesn't happen again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 10 Oct 2021 04:31:24 +0000 (21:31 -0700)]
altoslib: Add callback from AltosLog on file open failure
This lets the UI tell the user that logging isn't working.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 10 Oct 2021 03:58:26 +0000 (20:58 -0700)]
altosdroid: Switch storage to media dir
Even with the WRITE_EXTERNAL_STORAGE permission, we appear to no
longer have permission to write to a random external storage
dir. Instead, we only have permission to write to an app-specific dir,
buried deep in the directory tree. We can get that directory name with
getExternalMediaDirs()[0].
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 9 Oct 2021 01:31:35 +0000 (18:31 -0700)]
Version 1.9.9.1
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 8 Oct 2021 05:45:37 +0000 (22:45 -0700)]
libaltos: Use original windows printf/scanf
mingw now uses "improved" versions of printf/scanf, which may cause
trouble with some windows 10 installs. Just use the old versions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 7 Oct 2021 18:11:06 +0000 (12:11 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Thu, 7 Oct 2021 05:58:09 +0000 (22:58 -0700)]
libaltos: Make windows dlls reproducible
Use SOURCE_DATE_EPOCH=0 to ensure these dlls are
reproducible.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 7 Oct 2021 05:53:28 +0000 (23:53 -0600)]
libaltos: don't carry pre-built .dll files in the repo any more
Keith Packard [Thu, 7 Oct 2021 04:13:38 +0000 (21:13 -0700)]
Version 1.9.9
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 24 Sep 2021 16:44:56 +0000 (09:44 -0700)]
1.9.9 release notes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Sep 2021 17:24:02 +0000 (10:24 -0700)]
altos: Measure mmc5983 offset
This improves mmc5983 accuracy by using the SET/RESET mechanism which
flips the orientation of the mag sensor to cal-out any sensor bias.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Sep 2021 17:22:13 +0000 (10:22 -0700)]
altoslib: Parse TeleMega v5.0 eeprom records
Oops. Missed one spot in adding TeleMega v5.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 24 Sep 2021 16:43:15 +0000 (09:43 -0700)]
altos: Fix config upgrade from 1.24 to 1.25
Alignment of pyro field changed due to increased size of fields which
shifted the whole struct by two bytes, leading to mis-updating the struct.
Fix that by creating a mirror of the ao_config type for version 1.24 and
then using that to fetch the old data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Sep 2021 03:24:13 +0000 (20:24 -0700)]
Remind us to update ANDROID_VERSION
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Sep 2021 03:23:10 +0000 (20:23 -0700)]
altosdroid: Set android version to 30
Need to change this for each release we do
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 22 Sep 2021 17:53:17 +0000 (11:53 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Tue, 21 Sep 2021 00:17:49 +0000 (18:17 -0600)]
snapshot TeleMega v4 turnon and test scripts before crafting v5 versions
Bdale Garbee [Tue, 21 Sep 2021 00:22:55 +0000 (18:22 -0600)]
update TeleMega bench scripts for v5.0 hardware
Bdale Garbee [Wed, 22 Sep 2021 17:45:49 +0000 (11:45 -0600)]
capture odd changes from production machine?
Bdale Garbee [Tue, 21 Sep 2021 04:06:30 +0000 (22:06 -0600)]
capture updates to Releasing from 1.9.8 release
Keith Packard [Tue, 21 Sep 2021 02:56:45 +0000 (19:56 -0700)]
Version 1.9.8
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Sep 2021 02:54:36 +0000 (19:54 -0700)]
doc: Update for 1.9.8
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Sep 2021 02:52:35 +0000 (19:52 -0700)]
doc: Add specs for TeleMega v5.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Sep 2021 02:49:49 +0000 (19:49 -0700)]
doc: Note pyro channel time limits on <1.9.8 firmware
16-bit delay values instead of 32-bit
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Sep 2021 02:59:45 +0000 (19:59 -0700)]
libaltos: Ignore cjnitest files for all targets
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Sep 2021 02:58:30 +0000 (19:58 -0700)]
altoslib: Document how to add a new product
Avoid missing some steps
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Sep 2021 00:17:06 +0000 (17:17 -0700)]
Add test-easymini-v1.0 script
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Sep 2021 23:28:37 +0000 (16:28 -0700)]
altos: All beep-enabled boards have beep config
HAS_BEEP_CONFIG is no longer used, switch to HAS_BEEP
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Sep 2021 04:04:41 +0000 (21:04 -0700)]
altos: Deal with cc1201 limitations
The CC1201 works fine at higher data rates, but at lower rates it
can't crank the RX bandwidth as tight as the CC1200. Deal with this by
checking the part number and using the correct settings for each one
when running at 9600 or 2400 baud.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Sep 2021 00:09:11 +0000 (17:09 -0700)]
Bump version to 1.9.7.1
Preliminary release for TeleMega v5.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Sep 2021 02:12:42 +0000 (19:12 -0700)]
libaltos: Update windows DLLs
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Sep 2021 02:01:34 +0000 (19:01 -0700)]
altosdroid: Add tilt angle to pad and flight tabs
Useful for monitoring attitude
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 23:50:18 +0000 (16:50 -0700)]
Add TeleMega v5.0 firmware
Followed steps in Releasing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 23:30:51 +0000 (16:30 -0700)]
altos: Build TeleMega v5.0 bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 23:30:08 +0000 (16:30 -0700)]
altos/telemega-v5.0: Space tones closer together
TeleMega beeper needs tones fairly closely spaced to
keep them in range.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 23:29:33 +0000 (16:29 -0700)]
altos: Allow beep tone spacing to be changed
New beeper needs closer spaced tones
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 23:28:22 +0000 (16:28 -0700)]
altos: Fix up HAS_FLIGHT_DEBUG
Some printf formats weren't right.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 21:56:51 +0000 (14:56 -0700)]
altosui: Add options for low frequency beeper
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 21:56:16 +0000 (14:56 -0700)]
altoslib: Support TeleMega v5.0
Add normalized data support
Add telemega idle monitor and telemetry packet support.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 21:54:16 +0000 (14:54 -0700)]
altos: Update telemega-v5.0 config
Fix cc120x interrupt pin.
Enable normalized data.
Select 2100Hz beeper default.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 21:53:47 +0000 (14:53 -0700)]
altos: Add normalized telemetry support
Just like logs
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 21:53:02 +0000 (14:53 -0700)]
altos: Support normalized log
Write log data with standard axes instead of device-specific ones.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 21:52:13 +0000 (14:52 -0700)]
altos: Allow devices to override default beep
New beeper will want new default.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 21:50:28 +0000 (14:50 -0700)]
altos: Support normalized axes in mpu6000 and mmc5983
For monitor idle, devices selecting 'normalized' log format also
get 'normalized' command mode. This reports data in a standard format,
along/across/through instead of raw device axes which depend on how the
part is mounted.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 21:48:50 +0000 (14:48 -0700)]
altos: Detect CC120X device type
Not that it has any effect on the driver, but maybe it should?
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 05:45:33 +0000 (22:45 -0700)]
altos/telemega-v5.0: Fix config for MMC5983
SPI mode 3
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 05:44:19 +0000 (22:44 -0700)]
altos/stm: Minor cleanups in ao_arch_funcs.h
Fix ao_gpio_set_output_mode to actually work again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 05:43:34 +0000 (22:43 -0700)]
altos: Get MMC5983 driver working
SPI ID is different.
Clean up pin settings to avoid transients
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 05:05:32 +0000 (22:05 -0700)]
altos: Add bit-bang i2c driver
Useful for debugging stuff, not useful for flight code as it
burns the CPU for timing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 05:15:50 +0000 (22:15 -0700)]
altos/stm: Use picolibc startup code
Instead of custom bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Sep 2021 05:11:11 +0000 (22:11 -0700)]
altos: Record MPU6000 failure but let device boot
Don't panic on MPU6000 failure
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Sep 2021 21:24:21 +0000 (14:24 -0700)]
altos: Fix telemega v5.0 CS_FLASH pin
It's on GPIOD 10, not GPIOD 3.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 7 Sep 2021 14:54:01 +0000 (07:54 -0700)]
Show mag sensor SPI ID
Keith Packard [Tue, 7 Sep 2021 06:07:24 +0000 (23:07 -0700)]
telemega-v5.0: Add Makefiles
Oops
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 18 Aug 2021 03:04:08 +0000 (20:04 -0700)]
altos: Prepare for picolibc stdio change
Instead of __iob, picolibc will use stdin, stdout and stderr globals.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 18 Aug 2021 03:02:05 +0000 (20:02 -0700)]
micropeak: Show error message if USB adapter open fails
Pop up an error dialog and *don't* show the download dialog as if the
open had worked.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 28 Aug 2021 19:16:45 +0000 (13:16 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Sat, 28 Aug 2021 19:16:08 +0000 (13:16 -0600)]
doc: add mounting hole spacing information to product outlines
Keith Packard [Mon, 16 Aug 2021 00:08:44 +0000 (17:08 -0700)]
libaltos: Add new microchip MAC address to bluetooth map
The new batch of BT modules use a new MAC prefix. On Linux, also add
the RFCOMM channel discovery code in case this happens again. On
windows, suffer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Aug 2021 00:04:20 +0000 (17:04 -0700)]
altos: Change MMC5893 driver to avoid interrupts
Set the chip to sample at 200Hz and then simply read the results at
100Hz to get a reasonably recent sample. This avoids a delay at each
sample interval.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 Aug 2021 04:03:15 +0000 (22:03 -0600)]
altos: Add MMC5983 driver
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 Aug 2021 04:02:42 +0000 (22:02 -0600)]
altos: Add preliminary TeleMega v5.0 bits
Axes not checked yet.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 27 Jul 2021 05:13:58 +0000 (22:13 -0700)]
ao-bringup: Use ao-test-igniter voltage check feature in pyro tests
This makes sure all pyro channels are 'in range' during testing to
validate the ADC is operating nominally.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 27 Jul 2021 05:03:04 +0000 (22:03 -0700)]
ao-test-igniter: Also test ADC voltage for in-range of 1-4 volts
This should catch ADC issues, like a solder bridge on the SoC.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 21 Jul 2021 21:26:35 +0000 (14:26 -0700)]
altos: Fixes for GCC 10 (-fno-common is default)
A couple of duplicate global definitions which GCC 10 flags
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 May 2021 05:27:27 +0000 (22:27 -0700)]
ao-bringup: Revert EasyMini scripts to 1.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 12 Jul 2021 17:08:05 +0000 (10:08 -0700)]
libaltos: Use cross compilers to build libaltos for i686, amd64, aarch64, armel and armhf
Use current debian packages to build libraries for x86 and arm debian hosts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 12 Jul 2021 17:03:24 +0000 (10:03 -0700)]
altosdroid: Show altitude as well as height
TeleGPS is more useful with altitude
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 12 Jul 2021 17:00:30 +0000 (10:00 -0700)]
doc: telemini force freq is pin 6, not 7
Telemini debug connector has only 6 pins
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 6 Jul 2021 05:52:35 +0000 (22:52 -0700)]
kernel: Widen pyro time values to 32 bits
This lets time values of greater than 327 seconds be used. 99% of this
code is to adjust existing configurations to the new structure, which is
wider than the old.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 24 Jun 2021 04:35:07 +0000 (21:35 -0700)]
altosuilib: Remove spurious message about libaltos
Wait until we've tried all libaltos options before complaining.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 21 Jun 2021 00:06:28 +0000 (17:06 -0700)]
altosdroid: Work without GPS available
On devices without GPS receivers, use network location instead of
crashing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 9 Jun 2021 04:51:28 +0000 (22:51 -0600)]
doc: update copyright year assertions
Keith Packard [Tue, 13 Apr 2021 01:39:48 +0000 (18:39 -0700)]
Version 1.9.7
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 May 2021 18:01:16 +0000 (11:01 -0700)]
doc: Update 1.9.7 release notes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 7 Jun 2021 23:14:25 +0000 (16:14 -0700)]
altosdroid: Bump to version 29
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 May 2021 03:19:56 +0000 (20:19 -0700)]
altosdroid: Update target API to 29
Required by current Android store
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 May 2021 05:28:32 +0000 (22:28 -0700)]
altosdroid: Revert getResource().getColor to old API
This should keep it compatible with API version 21
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 7 Jun 2021 23:11:01 +0000 (17:11 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Sun, 30 May 2021 22:08:25 +0000 (15:08 -0700)]
Version 1.9.6.5
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 May 2021 17:52:47 +0000 (10:52 -0700)]
altoslib: Protect has_monitor_battery from unset product
AltosDroid can query has_monitor_battery before the product data has
been set.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 May 2021 17:51:44 +0000 (10:51 -0700)]
altosdroid: Don't start bluetooth if address is null
If the address.address string is null, don't bother starting the
bluetooth service.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 May 2021 17:50:22 +0000 (10:50 -0700)]
altosdroid: protect USB read/write when connection is null
Check to see if connection is valid before attempting to read/write to
it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 May 2021 17:48:58 +0000 (10:48 -0700)]
altosdroid: Synchronize access to the 'rockets' list for online maps
Online maps gets rockets added by the telem code and the same data are
used to create the maps UI. Synchronise access to that object to prevent
simutaneous operations.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 May 2021 17:47:37 +0000 (10:47 -0700)]
altosdroid: Safeguard preferences code in case it's called too early
Make sure there's a backend set up before accessing data as it seems
this code can be called before the preferences code is called before
the backend is created.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 May 2021 06:26:12 +0000 (23:26 -0700)]
altosdroid: Skip clicks on BT device entries that are too short
Maybe these are some kind of extra object? In any case, nothing that
we care about, so just ignore the click.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 19 May 2021 05:54:48 +0000 (23:54 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos