Keith Packard [Mon, 18 May 2020 00:41:44 +0000 (17:41 -0700)]
Add parts for STM32l based µP
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 May 2020 00:40:38 +0000 (17:40 -0700)]
packages: add ufqfpn20 (stm32l tiny part)
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 15 May 2020 03:28:04 +0000 (21:28 -0600)]
add a footprint for the u-blox ZOE
Bdale Garbee [Thu, 14 May 2020 14:52:47 +0000 (08:52 -0600)]
give ZOE symbol a more useful footprint attribute
Bdale Garbee [Tue, 12 May 2020 08:59:41 +0000 (02:59 -0600)]
first cut at a schematic symbol for the u-blox ZOE-M8Q chip
Bdale Garbee [Mon, 11 May 2020 15:43:39 +0000 (09:43 -0600)]
add ZOE gps part and two potential regulator inductor choices
Bdale Garbee [Mon, 11 May 2020 15:33:31 +0000 (09:33 -0600)]
switch 4.7uF 0402 pref part to a much cheaper 6.3V part (don't need 10V)
Bdale Garbee [Mon, 4 May 2020 22:38:26 +0000 (16:38 -0600)]
don't plan to provide resistors to AC for EasyTimer
Bdale Garbee [Mon, 4 May 2020 22:36:27 +0000 (16:36 -0600)]
resolve part out of stock at DK for EasyTimer build
Bdale Garbee [Wed, 22 Apr 2020 23:40:02 +0000 (17:40 -0600)]
give LED tower base on TeleFireEight a bit more room to handle box tolerances
Bdale Garbee [Sun, 19 Apr 2020 16:43:25 +0000 (10:43 -0600)]
remove u-blox EVA data, as we never used that part
Bdale Garbee [Sun, 19 Apr 2020 16:37:54 +0000 (10:37 -0600)]
updated u-blox antenna design notes
Bdale Garbee [Sun, 19 Apr 2020 16:27:42 +0000 (10:27 -0600)]
get fresh u-blox ZOE documents before designing with one
Bdale Garbee [Sun, 19 Apr 2020 16:26:39 +0000 (10:26 -0600)]
more work on lht footprint generator - still not done
Bdale Garbee [Sat, 14 Mar 2020 03:53:13 +0000 (21:53 -0600)]
symbol for slide switch on revised TeleBT
Bdale Garbee [Sat, 14 Mar 2020 03:52:07 +0000 (21:52 -0600)]
make the mounting tabs on the switch body "pin 4" so I can ground them easily
Bdale Garbee [Sun, 1 Mar 2020 04:23:48 +0000 (21:23 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Sun, 1 Mar 2020 01:56:57 +0000 (17:56 -0800)]
Add lc8812 (sk6812 with pins moved)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Jan 2020 18:10:58 +0000 (10:10 -0800)]
Add 'pads' around USB SMT connector tangs
This makes sure there's bare copper around the tangs so that we get
enough solder stuck down there.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 29 Feb 2020 23:49:20 +0000 (16:49 -0700)]
int != float in python... sigh
Bdale Garbee [Sat, 29 Feb 2020 19:38:47 +0000 (12:38 -0700)]
add an SPDT switch symbol for TeleBT v4.0b
Bdale Garbee [Sat, 29 Feb 2020 19:29:55 +0000 (12:29 -0700)]
move push button switch to switches subdirectory for consistency
Bdale Garbee [Sat, 29 Feb 2020 19:26:43 +0000 (12:26 -0700)]
slide switch for TeleBT version 4.0b
Bdale Garbee [Tue, 25 Feb 2020 16:49:02 +0000 (09:49 -0700)]
use lepton-cli to generate schematic pdf pages directly
Bdale Garbee [Sun, 23 Feb 2020 07:46:32 +0000 (00:46 -0700)]
data sheets for the voltage regulators on EasyMini and TeleMini
Bdale Garbee [Sat, 15 Feb 2020 23:10:06 +0000 (16:10 -0700)]
footprint for a new, smaller 16.384 Mhz crystal
Bdale Garbee [Sat, 15 Feb 2020 22:39:29 +0000 (15:39 -0700)]
add 8-pin 50mil header footprint
Bdale Garbee [Fri, 10 Jan 2020 15:58:36 +0000 (08:58 -0700)]
add BMX160 to pref parts for TeleMega v4.0 build
Bdale Garbee [Fri, 10 Jan 2020 15:58:20 +0000 (08:58 -0700)]
don't default author and copyright assertion
Bdale Garbee [Fri, 10 Jan 2020 15:48:45 +0000 (08:48 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 10 Jan 2020 15:47:11 +0000 (08:47 -0700)]
updated 47uF 1206 cap for availability prior to TeleMega v4 build
Bdale Garbee [Mon, 6 Jan 2020 06:49:05 +0000 (23:49 -0700)]
item per line in footprint script, better copyright handling
Bdale Garbee [Mon, 6 Jan 2020 05:19:41 +0000 (22:19 -0700)]
move to python3 explicitly, per Debian policy
Keith Packard [Mon, 6 Jan 2020 01:21:49 +0000 (17:21 -0800)]
Use better pattern for generating all-drill.cnc
This matches whatever drill files are present, rather than generating
errors when one or the other is missing
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 6 Jan 2020 01:21:24 +0000 (17:21 -0800)]
Add TSX-3225 xtal footprint
Used on snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 6 Jan 2020 01:20:17 +0000 (17:20 -0800)]
Add ublox8 data sheets, along with a couple of xtals
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 26 Dec 2019 14:42:49 +0000 (11:42 -0300)]
update Makefile to generate lht targets too
Bdale Garbee [Thu, 26 Dec 2019 14:33:31 +0000 (11:33 -0300)]
start work on 11071 lihata footprint generator, improve license banners
Bdale Garbee [Thu, 26 Dec 2019 14:22:26 +0000 (11:22 -0300)]
capture schematic symbols created by Bdale but not in git yet
Bdale Garbee [Thu, 26 Dec 2019 14:17:31 +0000 (11:17 -0300)]
add a 2.75mm hole
Bdale Garbee [Thu, 26 Dec 2019 14:15:56 +0000 (11:15 -0300)]
creating stencils now uses a specialized cam job
Bdale Garbee [Thu, 26 Dec 2019 11:39:51 +0000 (08:39 -0300)]
assume stdout which simplifies things significantly
Bdale Garbee [Thu, 26 Dec 2019 11:28:54 +0000 (08:28 -0300)]
working on Python library to emit lht footprints
Bdale Garbee [Tue, 12 Nov 2019 23:14:06 +0000 (16:14 -0700)]
update pref parts list to use 4ucon for all screw terminals
Bdale Garbee [Wed, 9 Oct 2019 03:32:36 +0000 (21:32 -0600)]
be more precise about mfg part number for MAX-8Q
Bdale Garbee [Fri, 4 Oct 2019 22:11:20 +0000 (16:11 -0600)]
update bomAM to reflect changes in lepton-eda 1.9.8 and later
Bdale Garbee [Fri, 4 Oct 2019 22:10:56 +0000 (16:10 -0600)]
add MAX-8Q to pref parts list since MAX-7Q is in short supply
Bdale Garbee [Tue, 1 Oct 2019 17:09:08 +0000 (11:09 -0600)]
move wire hole to correct side, adjust cut-out dimensions per Terry's notes
Bdale Garbee [Tue, 24 Sep 2019 04:46:14 +0000 (22:46 -0600)]
thin out side walls a bit per Terry's recommendation
Bdale Garbee [Tue, 24 Sep 2019 04:45:26 +0000 (22:45 -0600)]
symbol for Bosch BMX160 IMU
Bdale Garbee [Tue, 24 Sep 2019 04:27:25 +0000 (22:27 -0600)]
add footprint for Bosch LGA14 used by BMX160
Bdale Garbee [Tue, 17 Sep 2019 15:21:41 +0000 (09:21 -0600)]
IPC reference doc on fiducial markers .. 1mm spot in 2mm mask opening works
Bdale Garbee [Tue, 10 Sep 2019 17:56:52 +0000 (11:56 -0600)]
fix weird lip in pad number LCD opening
Bdale Garbee [Mon, 5 Aug 2019 04:43:15 +0000 (22:43 -0600)]
use cut tape DK part number for resistors in pref parts
Bdale Garbee [Mon, 5 Aug 2019 04:42:43 +0000 (22:42 -0600)]
massive rework of fab targets in pcb-rnd.mk to use 'cam' output approach
Bdale Garbee [Thu, 1 Aug 2019 16:27:54 +0000 (10:27 -0600)]
9-axis part we might use for Mega products
Bdale Garbee [Thu, 1 Aug 2019 16:05:38 +0000 (10:05 -0600)]
data sheet for the Bosch BMI088 IMU, which might be used on future Mega boards
Bdale Garbee [Fri, 5 Jul 2019 20:14:44 +0000 (14:14 -0600)]
GHS label sheet for 2 TeleFireEight boxes
Bdale Garbee [Mon, 1 Jul 2019 15:46:57 +0000 (09:46 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Mon, 1 Jul 2019 06:47:31 +0000 (23:47 -0700)]
pcb-rnd: Get zip file creation working again
The output files all got renamed; fix up the pcb-rnd.mk file to match.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 1 Jul 2019 06:45:36 +0000 (23:45 -0700)]
Add parts for snekboard v1.1
DPST switch
DRV8800
TPS2121
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 28 Jun 2019 02:23:42 +0000 (20:23 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Fri, 28 Jun 2019 02:22:59 +0000 (19:22 -0700)]
Add 3.3V TO252 regulator
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 25 Jun 2019 23:39:13 +0000 (17:39 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Tue, 25 Jun 2019 23:37:41 +0000 (17:37 -0600)]
update preferred parts to reflect current availability
Keith Packard [Tue, 18 Jun 2019 18:59:33 +0000 (11:59 -0700)]
Add cortex m0 and armv6m docs to stm32f042 directory
Makes them easier to find.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Jun 2019 01:05:03 +0000 (18:05 -0700)]
Deliver paste files to oshpark now that there's oshstencil
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Jun 2019 00:21:58 +0000 (17:21 -0700)]
Add parts for snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 23 Apr 2019 17:53:31 +0000 (11:53 -0600)]
add TeleLCO panel back side recess around key switch so nut grabs better
Bdale Garbee [Thu, 18 Apr 2019 00:28:02 +0000 (18:28 -0600)]
change transistor component types in pref parts to rationalize partslists
Bdale Garbee [Tue, 16 Apr 2019 19:16:46 +0000 (13:16 -0600)]
update TeleLCO panel to include better registration marks for Terry
Bdale Garbee [Thu, 28 Mar 2019 16:18:45 +0000 (11:18 -0500)]
add jlcpcb target to pcb-rnd.mk
Bdale Garbee [Wed, 27 Mar 2019 17:26:27 +0000 (12:26 -0500)]
data sheet for p-fet used for polarity protection, and associated symbol
Bdale Garbee [Mon, 25 Mar 2019 15:06:22 +0000 (11:06 -0400)]
update panel cover g-code generation
Bdale Garbee [Fri, 22 Mar 2019 21:01:15 +0000 (15:01 -0600)]
rework TeleLCO panel for key switch .. NFPA 1127 compliance issue
Bdale Garbee [Mon, 18 Mar 2019 22:03:55 +0000 (16:03 -0600)]
data sheet for TeleLCO key switch
Bdale Garbee [Sun, 17 Mar 2019 18:22:35 +0000 (12:22 -0600)]
data sheet for new GaG pyro LED offering
Bdale Garbee [Sun, 10 Mar 2019 23:02:34 +0000 (17:02 -0600)]
symbol for ADS1256 ADC
Bdale Garbee [Sun, 10 Mar 2019 23:01:32 +0000 (17:01 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sun, 10 Mar 2019 23:01:23 +0000 (17:01 -0600)]
data sheet for ADS1256
Bdale Garbee [Sun, 10 Mar 2019 23:00:27 +0000 (17:00 -0600)]
symbol for new ADC
Bdale Garbee [Sun, 10 Mar 2019 22:37:55 +0000 (16:37 -0600)]
data sheet for new ADC part
Bdale Garbee [Sun, 10 Mar 2019 22:37:08 +0000 (16:37 -0600)]
add 16.384 MHz crystal needed for new ADC part
Bdale Garbee [Sun, 10 Mar 2019 22:35:03 +0000 (16:35 -0600)]
add footprint for Abracom crystals in ABM3C package
Keith Packard [Fri, 8 Mar 2019 14:42:10 +0000 (15:42 +0100)]
Add ADS1255 datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 16 Feb 2019 01:39:23 +0000 (18:39 -0700)]
turn on the fifth and sixth mounting holes in mechanical design for TF8 v2 top
Bdale Garbee [Fri, 14 Dec 2018 04:14:04 +0000 (21:14 -0700)]
improve 11071 footprint with full copper ovals for tangs on both surfaces
Bdale Garbee [Wed, 12 Dec 2018 03:37:13 +0000 (20:37 -0700)]
update bomAM to reflect change in lepton-eda 1.9.7 api
Bdale Garbee [Sun, 9 Dec 2018 00:03:15 +0000 (17:03 -0700)]
update bomAM to reflect more scheme function renaming in latest lepton release
Bdale Garbee [Thu, 6 Dec 2018 23:10:21 +0000 (16:10 -0700)]
note that the 8743 FETs come on a 16mm reel
Bdale Garbee [Thu, 6 Dec 2018 22:57:48 +0000 (15:57 -0700)]
note that CC1200 comes on 12mm reel
Bdale Garbee [Tue, 4 Dec 2018 06:05:59 +0000 (23:05 -0700)]
add footprints from pcb used in test stand board that weren't in our library
Bdale Garbee [Sat, 1 Dec 2018 15:49:31 +0000 (08:49 -0700)]
logo in top silk 0.670 inches tall
Bdale Garbee [Mon, 26 Nov 2018 05:56:43 +0000 (22:56 -0700)]
pull in standard footprints for 0603, 0805, and 1206 parts
Bdale Garbee [Mon, 26 Nov 2018 05:51:54 +0000 (22:51 -0700)]
add footprint for Panasonic M1040M shielded inductors
Bdale Garbee [Sun, 25 Nov 2018 23:03:20 +0000 (16:03 -0700)]
data sheet for car stereo amp chip
Bdale Garbee [Sun, 25 Nov 2018 23:02:30 +0000 (16:02 -0700)]
adding parts for car stereo project
Bdale Garbee [Fri, 23 Nov 2018 23:49:40 +0000 (16:49 -0700)]
add group[57] support to all zip creation targets, clean -bom.csv
Bdale Garbee [Fri, 16 Nov 2018 08:35:15 +0000 (22:35 -1000)]
fix XYRS file creation when using pcb-rnd
Bdale Garbee [Sat, 10 Nov 2018 19:59:55 +0000 (12:59 -0700)]
more pref parts updates reflecting availability for easymega build
projects / hw / altusmetrum / log