Bdale Garbee [Sun, 16 Feb 2014 20:16:26 +0000 (13:16 -0700)]
add a single-sided footprint for wire antennas launching from PCB end
Keith Packard [Sun, 16 Feb 2014 19:22:14 +0000 (11:22 -0800)]
Add package for a soldered-in-place lipo
This provides two solder pads 4mm square to attach a lipo battery to
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Feb 2014 19:01:15 +0000 (11:01 -0800)]
Package PWSON-N8 was flipped
oops. pins on the wrong sides.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Feb 2014 18:58:57 +0000 (10:58 -0800)]
Add symbol and datasheet for skyworks AAT3681A
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 15 Feb 2014 23:45:26 +0000 (16:45 -0700)]
symbol for TI CC1110, which is not pinout-compatible with the CC1111!
Bdale Garbee [Thu, 30 Jan 2014 08:36:17 +0000 (01:36 -0700)]
add datasheet for the TeleDongle version of the Hammond 1551 box
Bdale Garbee [Mon, 13 Jan 2014 03:53:54 +0000 (20:53 -0700)]
update copyright dates in schematic title blocks to 2014
Bdale Garbee [Sun, 12 Jan 2014 22:39:27 +0000 (15:39 -0700)]
big resistor footprint for test fixture
Bdale Garbee [Sun, 12 Jan 2014 18:38:56 +0000 (11:38 -0700)]
more symbols
Bdale Garbee [Thu, 26 Dec 2013 08:18:56 +0000 (01:18 -0700)]
fix central vias for use on multi-layer boards
Bdale Garbee [Thu, 26 Dec 2013 00:48:40 +0000 (17:48 -0700)]
symbols from fox1ihu needed for usbrelay board
Bdale Garbee [Thu, 19 Dec 2013 22:24:59 +0000 (15:24 -0700)]
build new relay footprints
Bdale Garbee [Thu, 19 Dec 2013 22:24:10 +0000 (15:24 -0700)]
cleaned up picodebug footprint
Bdale Garbee [Thu, 19 Dec 2013 22:23:26 +0000 (15:23 -0700)]
as used on fox1ihu v2
Bdale Garbee [Thu, 19 Dec 2013 20:19:47 +0000 (13:19 -0700)]
Omron relay datasheet
Bdale Garbee [Thu, 19 Dec 2013 20:16:39 +0000 (13:16 -0700)]
Omron RF relays in both normal and "E" footprints
Bdale Garbee [Sun, 15 Dec 2013 07:28:46 +0000 (00:28 -0700)]
saw filter data sheet, symbol for AMSAT's chosen LDO
Bdale Garbee [Sun, 15 Dec 2013 01:38:43 +0000 (18:38 -0700)]
Omron G6Z-1FE RF relay
Bdale Garbee [Sun, 24 Nov 2013 23:20:53 +0000 (16:20 -0700)]
create a 4-pin debug connector that's a
530470410 without silk - picodebug
Bdale Garbee [Sun, 24 Nov 2013 08:25:52 +0000 (01:25 -0700)]
add a both copyright schematic border in D size
Keith Packard [Sun, 3 Nov 2013 09:04:05 +0000 (01:04 -0800)]
Add datasheet, symbol and package for philips 74HC4050 hex level shifter
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Nov 2013 01:45:08 +0000 (18:45 -0700)]
Fix clearance for s-pwson-n8 footprint, make TI DRV8837 use it
Fix the solder mask and copper clearance values so that the mask goes
between the pins while the copper keeps away.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Nov 2013 00:18:54 +0000 (17:18 -0700)]
Add TI s-pwson-n8 footprint (for drv8837)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 20:23:48 +0000 (13:23 -0700)]
Add TI DRV8837 datasheet and symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:24:38 +0000 (03:24 -0700)]
Merge remote-tracking branch 'origin/master'
Signed-off-by: Keith Packard <keithp@keithp.com>
Conflicts:
packages/Makefile
Keith Packard [Sat, 2 Nov 2013 10:22:09 +0000 (03:22 -0700)]
Add datasheet for Sumida CR32 inductor series
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:21:40 +0000 (03:21 -0700)]
Add datasheet for Skyworks AAT4901 mosfet h-bridge
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:21:00 +0000 (03:21 -0700)]
Add STM32F datasheets
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:20:33 +0000 (03:20 -0700)]
Add datasheets for FTDI parts (FT230 and FT232)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:19:48 +0000 (03:19 -0700)]
Add datasheet for rohm phototransistor used with MicroPeak
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:19:15 +0000 (03:19 -0700)]
Add datasheet for microchip TC2185 LDO
Signed-off-by: Keith Packard <keithp@keithp.com>
cro# with '#' will be ignored, and an empty message aborts the commit.
Keith Packard [Sat, 2 Nov 2013 10:18:36 +0000 (03:18 -0700)]
Add datasheet for Maxim MAX1724 5V .2A boost regulator
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:18:10 +0000 (03:18 -0700)]
Add Maxim app-note for temperature monitoring chip
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:16:59 +0000 (03:16 -0700)]
Add datasheet for Analog ADXL375 3-axis accelerometer
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:16:18 +0000 (03:16 -0700)]
Add keithp title-D symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:15:49 +0000 (03:15 -0700)]
Add TI 754410 bipolar H-bridge symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:14:50 +0000 (03:14 -0700)]
Add symbol and datasheet for Melexis MLX90614 mosfet h-bridge
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:13:50 +0000 (03:13 -0700)]
Add Melexis IR thermometer chip
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:12:44 +0000 (03:12 -0700)]
Add Maxim MAX1724 5V .2A boost regulator symbol
Uses the same SOT-23-5 package as lots of other parts, requires a 10uH
inductor to operate (sigh).
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:12:12 +0000 (03:12 -0700)]
Add 6x2 connectors and header symbols
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:11:47 +0000 (03:11 -0700)]
Add Vcc symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:11:06 +0000 (03:11 -0700)]
Add ATmega328 symbols in QFP packages
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:10:02 +0000 (03:10 -0700)]
Use custom FTDI-QFN32 footprint
The square pads are easier to cut a stencil using the PSU laser cutter
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:09:16 +0000 (03:09 -0700)]
Increase pad width on tfsoj-8 footprint
Provides more area for solder.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:05:58 +0000 (03:05 -0700)]
Add CR32 footprint for sumida inductors. Customize QFN32 for FTDI
CR32 is the sumida series of large SMT wound inductors.
The FTDI footprint has square pads instead of rounded ones; that makes
cutting stencils at PSU a lot easier (it wrecks round pads somehow).
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 25 Oct 2013 06:19:38 +0000 (00:19 -0600)]
catalog of FotoFab standard shields
Bdale Garbee [Fri, 25 Oct 2013 06:07:37 +0000 (00:07 -0600)]
narrower line width
Bdale Garbee [Fri, 25 Oct 2013 06:03:39 +0000 (00:03 -0600)]
switch to stock shield from fotofab
Bdale Garbee [Wed, 23 Oct 2013 05:42:28 +0000 (23:42 -0600)]
fix pin numbering
Bdale Garbee [Sun, 6 Oct 2013 22:52:16 +0000 (16:52 -0600)]
add support for arbitrary pads, use it to add diagonals to cubesatshield
Bdale Garbee [Sun, 6 Oct 2013 05:20:34 +0000 (23:20 -0600)]
data sheets for the 4ucon parts wer'e ordering, eliminate wrong micro USB one
Bdale Garbee [Sun, 6 Oct 2013 05:17:00 +0000 (23:17 -0600)]
family data sheet containing the Hirose micro USB we actually use
Bdale Garbee [Sun, 6 Oct 2013 05:15:42 +0000 (23:15 -0600)]
we don't actually use the reverse-side version of this connector!
Keith Packard [Mon, 30 Sep 2013 16:49:28 +0000 (09:49 -0700)]
Add Murara piezo beeper pklcs1212 package and datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:29:11 +0000 (23:29 -0700)]
Use existing geda SO20W footprint for holtek ht12d
Looks like this will work
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:18:50 +0000 (23:18 -0700)]
Add footprint for statek cx1vsm crystal
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:18:12 +0000 (23:18 -0700)]
Fix packages/Makefile -- missing backslash
Oops. Merging Makefile was done wrong.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:09:47 +0000 (23:09 -0700)]
Merge remote-tracking branch 'origin/master'
Conflicts:
packages/Makefile
Keith Packard [Sat, 28 Sep 2013 06:05:23 +0000 (23:05 -0700)]
Fix FTDI ft232r-qfn symbol
Shuffle symbol pin locations around. Add ground pad.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:04:26 +0000 (23:04 -0700)]
Add package for PJ-037A barrel connector
The usual Arduino power supply connector
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:02:42 +0000 (23:02 -0700)]
Add symbol for holtek ht12d in 20sop package
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 28 Sep 2013 06:02:41 +0000 (00:02 -0600)]
data sheet for the crytal Tony wants for the Fox-1 command decoder
Bdale Garbee [Sat, 28 Sep 2013 05:52:38 +0000 (23:52 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Conflicts:
packages/Makefile
Keith Packard [Sat, 28 Sep 2013 05:49:45 +0000 (22:49 -0700)]
Add holtek ht12d/ht12f 2¹² decoder data sheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 19 Sep 2013 22:14:14 +0000 (17:14 -0500)]
add new footprint for LT1963 on Fox IHU, have Makefile build recent footprints
Bdale Garbee [Mon, 16 Sep 2013 01:35:10 +0000 (19:35 -0600)]
first stab at designing an RF shield footprint for Fox-1 IHU
note that I don't know how to do "diagonal" pads, so the corners don't
connect right yet. also note that this design has not been reviewed or
approved by Tony or Bob and so should be considered subject to change...
Keith Packard [Sun, 8 Sep 2013 08:11:29 +0000 (01:11 -0700)]
Add FT232RQ symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Sep 2013 06:25:05 +0000 (23:25 -0700)]
Add bc4aa battery holder footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Sep 2013 06:01:52 +0000 (23:01 -0700)]
Add TFSOJ-8 footprint for AAT4901 H-bridge
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 6 Sep 2013 15:51:03 +0000 (09:51 -0600)]
data sheet for the LT1963A Tony wants me to use on the fox IHU v2
Keith Packard [Mon, 12 Aug 2013 09:12:33 +0000 (11:12 +0200)]
Add a tool to round BOM amounts to reasonable quantities
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 11 Aug 2013 21:10:06 +0000 (23:10 +0200)]
Change pin/pad clearance to 6mils on ufqfpn48
Make it work with both oshpark and 66each
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 11 Aug 2013 21:04:10 +0000 (23:04 +0200)]
Trim whitespace in partslist generation scheme
This makes the output cut&paste compatible with DK's text import
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 11 Aug 2013 21:02:57 +0000 (23:02 +0200)]
Fix ufqfpn48.5c to generate matching footprint
The .5c file was generating a different footprint, presumably due to
changes in the footprint.5c file
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 4 Aug 2013 19:57:38 +0000 (13:57 -0600)]
fix Taoglas passive patch footprint
Bdale Garbee [Sun, 28 Jul 2013 16:52:52 +0000 (10:52 -0600)]
`Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sun, 28 Jul 2013 16:52:33 +0000 (10:52 -0600)]
app note that was buried in the telebt tree
Keith Packard [Fri, 19 Jul 2013 17:52:01 +0000 (10:52 -0700)]
Add side-firing 0603 LED footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 19 Jul 2013 15:21:01 +0000 (09:21 -0600)]
merge more data sheets
Keith Packard [Mon, 15 Jul 2013 22:25:20 +0000 (15:25 -0700)]
Change LPH footprint to use just pins 1 and 2
No reason to label all four pins when they're internally connected
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 15 Jul 2013 22:08:05 +0000 (15:08 -0700)]
Add LPH series switch footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Jul 2013 10:31:55 +0000 (03:31 -0700)]
Add 2mm pitch pin header package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jul 2013 06:00:38 +0000 (23:00 -0700)]
Add ublox-7 hardware integration manual
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jul 2013 19:42:27 +0000 (12:42 -0700)]
Flip MLP 4x3 package around
Was drawn looking at the bottom rather than the top. Not so useful
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jul 2013 19:25:55 +0000 (12:25 -0700)]
Add SAW filter symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jul 2013 19:09:50 +0000 (12:09 -0700)]
Add 1.4mm x 1.0mm SAW filter package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 13 Jun 2013 02:49:50 +0000 (19:49 -0700)]
Create footprint for Taoglas 1575.18.4.A.02 GPS patch antenna
A bit of clever hacking -- a pad is defined around the hole on the
bottom side to which the antenna will be soldered. No metal occurs on
the top side around the pin
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Jun 2013 23:29:04 +0000 (16:29 -0700)]
Don't include 'no-load' parts in vendor partslist
Make sure the partslist includes only components actually to be loaded
on the board.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Jun 2013 18:02:30 +0000 (11:02 -0700)]
Add 4mmx3mm MLP8 package (for smaller flash parts)
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 16 May 2013 00:42:41 +0000 (18:42 -0600)]
capture FDS9926A data sheet for posterity
Bdale Garbee [Tue, 7 May 2013 03:16:52 +0000 (21:16 -0600)]
data sheet for AXSEM ax5051, can do BPSK on 70cm but RX sensitivity poor?
Bdale Garbee [Sun, 5 May 2013 14:09:27 +0000 (08:09 -0600)]
footprint for GPS patched used on TeleMetrum v0.2
Bdale Garbee [Sat, 4 May 2013 05:17:55 +0000 (23:17 -0600)]
add cc110l transceiver data sheet and errata
Bdale Garbee [Thu, 2 May 2013 17:06:24 +0000 (11:06 -0600)]
merge footprints needed for TeleMetrum v1.2b
Bdale Garbee [Thu, 2 May 2013 17:03:22 +0000 (11:03 -0600)]
merge symbols needed for TeleMetrum v1.2b
Bdale Garbee [Fri, 26 Apr 2013 03:13:30 +0000 (21:13 -0600)]
datasheet for 4050
Bdale Garbee [Fri, 26 Apr 2013 00:23:25 +0000 (18:23 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 26 Apr 2013 00:23:12 +0000 (18:23 -0600)]
merge symbols and footprints needed for TeleTerra
Keith Packard [Wed, 24 Apr 2013 00:38:41 +0000 (17:38 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Tue, 23 Apr 2013 23:43:12 +0000 (17:43 -0600)]
symbol and footprint for Rayson BTM-182 Bluetooth(tm) module
projects / hw / altusmetrum / log