]>
git.gag.com Git - hw/altusmetrum/log
Bdale Garbee [Mon, 18 Aug 2014 00:58:46 +0000 (18:58 -0600)]
data sheet for the cc1175
Bdale Garbee [Mon, 18 Aug 2014 00:56:45 +0000 (18:56 -0600)]
cc1200 data sheet and 70cm ref design
Bdale Garbee [Thu, 14 Aug 2014 03:36:26 +0000 (21:36 -0600)]
screw terminals Bdale likes for ebay bulkheads, 3.5mm spacing
Bdale Garbee [Mon, 14 Jul 2014 20:38:20 +0000 (14:38 -0600)]
more data sheets
Bdale Garbee [Mon, 14 Jul 2014 20:37:29 +0000 (14:37 -0600)]
add footprint generator for audio amp
Bdale Garbee [Mon, 14 Jul 2014 20:34:08 +0000 (14:34 -0600)]
stuff for usbclassd
Bdale Garbee [Sun, 6 Jul 2014 03:12:52 +0000 (21:12 -0600)]
symbols for parts used on USB class-D audio amplifier project
Bdale Garbee [Tue, 1 Jul 2014 23:20:37 +0000 (17:20 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Tue, 1 Jul 2014 23:20:14 +0000 (17:20 -0600)]
move amplifier data sheet into audito subdir
Keith Packard [Tue, 1 Jul 2014 23:10:23 +0000 (16:10 -0700)]
Update nx3215sa xtal footprint to use suggested land pattern
The package pads are 0.75 x 1.3 mm, but the data sheet suggests a pad
size of 1.0 x 1.8mm to ensure sufficient solder around, I assume.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 29 Jun 2014 16:02:30 +0000 (10:02 -0600)]
audio amplifier chip Bdale is considering for whole house audio system
Bdale Garbee [Wed, 18 Jun 2014 02:57:11 +0000 (20:57 -0600)]
datasheet for the new fox crystal
Bdale Garbee [Wed, 18 Jun 2014 02:56:08 +0000 (20:56 -0600)]
footprint for new fox crystal
Bdale Garbee [Sun, 27 Apr 2014 00:39:49 +0000 (18:39 -0600)]
Micrel high-side switches
Bdale Garbee [Sun, 27 Apr 2014 00:29:53 +0000 (18:29 -0600)]
new parts
Bdale Garbee [Tue, 8 Apr 2014 16:19:19 +0000 (10:19 -0600)]
baro sensor used in early TeleMetrum and TeleMini boards
Bdale Garbee [Tue, 8 Apr 2014 16:19:01 +0000 (10:19 -0600)]
accel used in early TeleMetrum boards
Bdale Garbee [Thu, 27 Mar 2014 17:47:17 +0000 (10:47 -0700)]
config file for pcb to only pull footprints from our library
Bdale Garbee [Tue, 18 Mar 2014 16:50:26 +0000 (10:50 -0600)]
fix clearance issues when doing top layer ground floods
Bdale Garbee [Tue, 18 Mar 2014 06:07:24 +0000 (00:07 -0600)]
fix problems with MicroMaTch footprints exposed by freedfm.com
Bdale Garbee [Fri, 7 Mar 2014 01:29:17 +0000 (18:29 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 7 Mar 2014 01:28:51 +0000 (18:28 -0700)]
update usbAmale footprint to support multiple vendors
Bdale Garbee [Thu, 6 Mar 2014 22:49:49 +0000 (15:49 -0700)]
tweak offboard symbol to work better
Bdale Garbee [Thu, 6 Mar 2014 19:09:44 +0000 (12:09 -0700)]
4ucon USB A connector .. 0.123/ea at q1000
Bdale Garbee [Thu, 6 Mar 2014 18:46:15 +0000 (11:46 -0700)]
baseline usb A connector for usbtrng
Bdale Garbee [Thu, 6 Mar 2014 18:45:10 +0000 (11:45 -0700)]
possibly cheaper USB a connector for usbtrng
Bdale Garbee [Thu, 6 Mar 2014 18:15:31 +0000 (11:15 -0700)]
add a symbol for offboard parts .. launchpad bug #
1288906 applies
Bdale Garbee [Thu, 6 Mar 2014 17:16:54 +0000 (10:16 -0700)]
possible enclosure for usbtrng
Keith Packard [Sat, 1 Mar 2014 04:41:31 +0000 (20:41 -0800)]
Add LPC11U14 BIOS disassemble and cortex m0 manual
Bdale Garbee [Fri, 28 Feb 2014 18:01:06 +0000 (11:01 -0700)]
update copyright year
Bdale Garbee [Mon, 24 Feb 2014 01:15:08 +0000 (18:15 -0700)]
data sheets and footprints for LipoCharger and USBTRNG
Bdale Garbee [Sat, 22 Feb 2014 07:30:55 +0000 (00:30 -0700)]
original A and B USB only have 4 pins .. needs a different symbol
Bdale Garbee [Sat, 22 Feb 2014 07:26:34 +0000 (00:26 -0700)]
add footprint for a USB A connector
Bdale Garbee [Sun, 16 Feb 2014 23:01:39 +0000 (16:01 -0700)]
switch we use on LipoCharger
Bdale Garbee [Sun, 16 Feb 2014 21:52:03 +0000 (14:52 -0700)]
add a 6-pin version of the picodebug to allow including serial pins
Bdale Garbee [Sun, 16 Feb 2014 20:16:26 +0000 (13:16 -0700)]
add a single-sided footprint for wire antennas launching from PCB end
Keith Packard [Sun, 16 Feb 2014 19:22:14 +0000 (11:22 -0800)]
Add package for a soldered-in-place lipo
This provides two solder pads 4mm square to attach a lipo battery to
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Feb 2014 19:01:15 +0000 (11:01 -0800)]
Package PWSON-N8 was flipped
oops. pins on the wrong sides.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Feb 2014 18:58:57 +0000 (10:58 -0800)]
Add symbol and datasheet for skyworks AAT3681A
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 15 Feb 2014 23:45:26 +0000 (16:45 -0700)]
symbol for TI CC1110, which is not pinout-compatible with the CC1111!
Bdale Garbee [Thu, 30 Jan 2014 08:36:17 +0000 (01:36 -0700)]
add datasheet for the TeleDongle version of the Hammond 1551 box
Bdale Garbee [Mon, 13 Jan 2014 03:53:54 +0000 (20:53 -0700)]
update copyright dates in schematic title blocks to 2014
Bdale Garbee [Sun, 12 Jan 2014 22:39:27 +0000 (15:39 -0700)]
big resistor footprint for test fixture
Bdale Garbee [Sun, 12 Jan 2014 18:38:56 +0000 (11:38 -0700)]
more symbols
Bdale Garbee [Thu, 26 Dec 2013 08:18:56 +0000 (01:18 -0700)]
fix central vias for use on multi-layer boards
Bdale Garbee [Thu, 26 Dec 2013 00:48:40 +0000 (17:48 -0700)]
symbols from fox1ihu needed for usbrelay board
Bdale Garbee [Thu, 19 Dec 2013 22:24:59 +0000 (15:24 -0700)]
build new relay footprints
Bdale Garbee [Thu, 19 Dec 2013 22:24:10 +0000 (15:24 -0700)]
cleaned up picodebug footprint
Bdale Garbee [Thu, 19 Dec 2013 22:23:26 +0000 (15:23 -0700)]
as used on fox1ihu v2
Bdale Garbee [Thu, 19 Dec 2013 20:19:47 +0000 (13:19 -0700)]
Omron relay datasheet
Bdale Garbee [Thu, 19 Dec 2013 20:16:39 +0000 (13:16 -0700)]
Omron RF relays in both normal and "E" footprints
Bdale Garbee [Sun, 15 Dec 2013 07:28:46 +0000 (00:28 -0700)]
saw filter data sheet, symbol for AMSAT's chosen LDO
Bdale Garbee [Sun, 15 Dec 2013 01:38:43 +0000 (18:38 -0700)]
Omron G6Z-1FE RF relay
Bdale Garbee [Sun, 24 Nov 2013 23:20:53 +0000 (16:20 -0700)]
create a 4-pin debug connector that's a
530470410 without silk - picodebug
Bdale Garbee [Sun, 24 Nov 2013 08:25:52 +0000 (01:25 -0700)]
add a both copyright schematic border in D size
Keith Packard [Sun, 3 Nov 2013 09:04:05 +0000 (01:04 -0800)]
Add datasheet, symbol and package for philips 74HC4050 hex level shifter
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Nov 2013 01:45:08 +0000 (18:45 -0700)]
Fix clearance for s-pwson-n8 footprint, make TI DRV8837 use it
Fix the solder mask and copper clearance values so that the mask goes
between the pins while the copper keeps away.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Nov 2013 00:18:54 +0000 (17:18 -0700)]
Add TI s-pwson-n8 footprint (for drv8837)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 20:23:48 +0000 (13:23 -0700)]
Add TI DRV8837 datasheet and symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:24:38 +0000 (03:24 -0700)]
Merge remote-tracking branch 'origin/master'
Signed-off-by: Keith Packard <keithp@keithp.com>
Conflicts:
packages/Makefile
Keith Packard [Sat, 2 Nov 2013 10:22:09 +0000 (03:22 -0700)]
Add datasheet for Sumida CR32 inductor series
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:21:40 +0000 (03:21 -0700)]
Add datasheet for Skyworks AAT4901 mosfet h-bridge
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:21:00 +0000 (03:21 -0700)]
Add STM32F datasheets
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:20:33 +0000 (03:20 -0700)]
Add datasheets for FTDI parts (FT230 and FT232)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:19:48 +0000 (03:19 -0700)]
Add datasheet for rohm phototransistor used with MicroPeak
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:19:15 +0000 (03:19 -0700)]
Add datasheet for microchip TC2185 LDO
Signed-off-by: Keith Packard <keithp@keithp.com>
cro# with '#' will be ignored, and an empty message aborts the commit.
Keith Packard [Sat, 2 Nov 2013 10:18:36 +0000 (03:18 -0700)]
Add datasheet for Maxim MAX1724 5V .2A boost regulator
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:18:10 +0000 (03:18 -0700)]
Add Maxim app-note for temperature monitoring chip
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:16:59 +0000 (03:16 -0700)]
Add datasheet for Analog ADXL375 3-axis accelerometer
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:16:18 +0000 (03:16 -0700)]
Add keithp title-D symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:15:49 +0000 (03:15 -0700)]
Add TI 754410 bipolar H-bridge symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:14:50 +0000 (03:14 -0700)]
Add symbol and datasheet for Melexis MLX90614 mosfet h-bridge
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:13:50 +0000 (03:13 -0700)]
Add Melexis IR thermometer chip
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:12:44 +0000 (03:12 -0700)]
Add Maxim MAX1724 5V .2A boost regulator symbol
Uses the same SOT-23-5 package as lots of other parts, requires a 10uH
inductor to operate (sigh).
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:12:12 +0000 (03:12 -0700)]
Add 6x2 connectors and header symbols
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:11:47 +0000 (03:11 -0700)]
Add Vcc symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:11:06 +0000 (03:11 -0700)]
Add ATmega328 symbols in QFP packages
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:10:02 +0000 (03:10 -0700)]
Use custom FTDI-QFN32 footprint
The square pads are easier to cut a stencil using the PSU laser cutter
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:09:16 +0000 (03:09 -0700)]
Increase pad width on tfsoj-8 footprint
Provides more area for solder.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Nov 2013 10:05:58 +0000 (03:05 -0700)]
Add CR32 footprint for sumida inductors. Customize QFN32 for FTDI
CR32 is the sumida series of large SMT wound inductors.
The FTDI footprint has square pads instead of rounded ones; that makes
cutting stencils at PSU a lot easier (it wrecks round pads somehow).
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 25 Oct 2013 06:19:38 +0000 (00:19 -0600)]
catalog of FotoFab standard shields
Bdale Garbee [Fri, 25 Oct 2013 06:07:37 +0000 (00:07 -0600)]
narrower line width
Bdale Garbee [Fri, 25 Oct 2013 06:03:39 +0000 (00:03 -0600)]
switch to stock shield from fotofab
Bdale Garbee [Wed, 23 Oct 2013 05:42:28 +0000 (23:42 -0600)]
fix pin numbering
Bdale Garbee [Sun, 6 Oct 2013 22:52:16 +0000 (16:52 -0600)]
add support for arbitrary pads, use it to add diagonals to cubesatshield
Bdale Garbee [Sun, 6 Oct 2013 05:20:34 +0000 (23:20 -0600)]
data sheets for the 4ucon parts wer'e ordering, eliminate wrong micro USB one
Bdale Garbee [Sun, 6 Oct 2013 05:17:00 +0000 (23:17 -0600)]
family data sheet containing the Hirose micro USB we actually use
Bdale Garbee [Sun, 6 Oct 2013 05:15:42 +0000 (23:15 -0600)]
we don't actually use the reverse-side version of this connector!
Keith Packard [Mon, 30 Sep 2013 16:49:28 +0000 (09:49 -0700)]
Add Murara piezo beeper pklcs1212 package and datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:29:11 +0000 (23:29 -0700)]
Use existing geda SO20W footprint for holtek ht12d
Looks like this will work
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:18:50 +0000 (23:18 -0700)]
Add footprint for statek cx1vsm crystal
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:18:12 +0000 (23:18 -0700)]
Fix packages/Makefile -- missing backslash
Oops. Merging Makefile was done wrong.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:09:47 +0000 (23:09 -0700)]
Merge remote-tracking branch 'origin/master'
Conflicts:
packages/Makefile
Keith Packard [Sat, 28 Sep 2013 06:05:23 +0000 (23:05 -0700)]
Fix FTDI ft232r-qfn symbol
Shuffle symbol pin locations around. Add ground pad.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:04:26 +0000 (23:04 -0700)]
Add package for PJ-037A barrel connector
The usual Arduino power supply connector
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Sep 2013 06:02:42 +0000 (23:02 -0700)]
Add symbol for holtek ht12d in 20sop package
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 28 Sep 2013 06:02:41 +0000 (00:02 -0600)]
data sheet for the crytal Tony wants for the Fox-1 command decoder
Bdale Garbee [Sat, 28 Sep 2013 05:52:38 +0000 (23:52 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Conflicts:
packages/Makefile
Keith Packard [Sat, 28 Sep 2013 05:49:45 +0000 (22:49 -0700)]
Add holtek ht12d/ht12f 2¹² decoder data sheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 19 Sep 2013 22:14:14 +0000 (17:14 -0500)]
add new footprint for LT1963 on Fox IHU, have Makefile build recent footprints
projects / hw / altusmetrum / log