]>
git.gag.com Git - fw/altos/log
Keith Packard [Wed, 11 May 2016 06:04:23 +0000 (23:04 -0700)]
altosuilib: Don't flicker missing voltages when changing units
For some reason, a value of MISSING -1 was getting used, which caused
displays to light up briefly with a weird value when switching between
metric and imperial units.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 06:03:45 +0000 (23:03 -0700)]
altosdroid: Rate limit map loading pacifier
Just like in altosui.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 06:02:09 +0000 (23:02 -0700)]
altoslib: Allow map preloading to be aborted
Close the map preload dialog and it would be nice to stop loading map
bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 05:50:23 +0000 (22:50 -0700)]
altosuilib: Rate limit map loading pacifier updates
Just updating the pacifier was consuming a huge amount of CPU. Update
no more than once every 100ms.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 05:49:04 +0000 (22:49 -0700)]
altoslib: Remove some debug printf calls
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 05:46:58 +0000 (22:46 -0700)]
altoslib: Switch distance from m/ft to km/miles for large values
This adds lots of infrastructure to deal with making the unit used
depend on the value itself, and then uses it only for distances.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 May 2016 19:29:14 +0000 (12:29 -0700)]
Add TeleMega to spec list. Add TeleGPS RF output.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 May 2016 19:28:51 +0000 (12:28 -0700)]
Publish firmware with keithp-fat
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 May 2016 00:57:12 +0000 (17:57 -0700)]
altosdroid: Check for closed before writing/reading bluetooth
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 May 2016 00:56:28 +0000 (17:56 -0700)]
altosui/telegps: Ship firmware for new hardware
TBT v3.0 and Tmega v2.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 9 May 2016 21:52:38 +0000 (15:52 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Mon, 9 May 2016 21:52:21 +0000 (15:52 -0600)]
process updates made during 1.6.3 release cycle
Keith Packard [Mon, 9 May 2016 18:48:42 +0000 (11:48 -0700)]
Bump version to 1.6.3.1
Post 1.6.3 release
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 9 May 2016 18:33:48 +0000 (11:33 -0700)]
altos/cc1111: Use SW to drive UART RTS pin
Can't get the hw to work.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 May 2016 00:10:14 +0000 (17:10 -0700)]
Ignore some built files for 1.6.3
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 6 May 2016 23:49:30 +0000 (17:49 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Fri, 6 May 2016 23:49:09 +0000 (17:49 -0600)]
add beep to TeleMega turnon script
Keith Packard [Fri, 6 May 2016 23:46:57 +0000 (16:46 -0700)]
windows: Change install to look for browser in a different place
The windows registry is a mystery.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 5 May 2016 09:25:52 +0000 (02:25 -0700)]
altoslib: Fix map preloading callbacks, run in separate thread
The map storage and tile callbacks were muddled together. Create
clearly separate states for map data and have status updates be
delivered when registering for new status events so that registration
is sufficient to track the state without an explicit call to get the
current state.
Run the map tile creation in a separate thread so that even checking
status of files on disk runs out of the UI thread.
These fixes serve to make the pacifier update more smoothly, and also
not over/under count tile loading so that the loading actually
completes when all of the tiles are loaded.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 5 May 2016 06:56:44 +0000 (23:56 -0700)]
micropeak: Change order of windows install so that java detect works
I have no idea why this matters, but if you run the FTDI script before
trying to detect java, then the javaw.exe program isn't found and java
detection fails.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 5 May 2016 04:13:31 +0000 (21:13 -0700)]
doc: 1.6.3 release notes note TeleBT rts/cts and TM 2.0 monitor idle fixes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 5 May 2016 04:12:46 +0000 (21:12 -0700)]
doc: Update AltosDroid chapter for 1.6.3
New menu structure, idle mode and frequency configuration
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 2 May 2016 23:19:39 +0000 (16:19 -0700)]
altos: Make sure AO_MMA655X_INVERT is declared where needed
Add #define AO_MMA655X_INVERT 0 to existing products which didn't
declare it at all. This will make sure the value is set correctly for
each new board.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 2 May 2016 23:13:53 +0000 (16:13 -0700)]
altoslib: Deal with TeleMetrum v2.0 MMA6555 being inverted
Dumping the MMA655X data with the 'A' command provides the raw sensor
value. On TM v2.0 boards, the sensor is inverted, and all of the
firmware uses the inverted value except for the 'dump the raw data'
command. As a result, MonitorIdle was using the un-inverted value and
displaying mystic values.
I've fixed this in the ground station code by checking the product
name and conditionally inverting the value (4095 - value) for
TeleMetrum v2.0 products. Unknown products will generate a warning
dialog on AltosUI so we'll catch places where we've failed to add a
new product name.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 May 2016 01:38:42 +0000 (18:38 -0700)]
publish AltosDroid in keithp-fat target
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 May 2016 01:37:05 +0000 (18:37 -0700)]
altoslib: Flush during set_state. Don't store listener state.
The listener state wasn't used anyways, so don't bother storing
it. Also, flush the state during set_state, which actually causes the
state to be written out.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 May 2016 01:33:25 +0000 (18:33 -0700)]
altoslib: Correct stats for flights without a real landing
The landing time was miscomputed when the flight ended without
entering the landed state, as when the recording terminates at
apogee.
This led to an uncomputed average boost accel, so that is now checked
separately from max accel (which is done over the whole flight, not
just boost).
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 May 2016 01:30:16 +0000 (18:30 -0700)]
altosdroid: max height is a height, not a speed
Was using the wrong units in the flight tab
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 30 Apr 2016 15:46:52 +0000 (08:46 -0700)]
Revert "altos/stm: Run scheduler code on interrupt stack"
This reverts commit
6a9546413d6a236c010e806b50506d870961d074 .
This causes the device to stop reliably handling interrupts.
Keith Packard [Sat, 30 Apr 2016 04:49:43 +0000 (21:49 -0700)]
doc: Add idle mode info to 1.6.3 release note
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 Apr 2016 19:29:16 +0000 (12:29 -0700)]
altoslib: Make AltosPreferencesBackend abstract. Add set/put Serializable
This lets us add functionality to this directly, such as the new
serializable APIs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 Apr 2016 05:40:47 +0000 (01:40 -0400)]
altosdroid: Add configurable frequency set
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 Apr 2016 05:39:01 +0000 (01:39 -0400)]
Fix key in AndroidManifest.xml.in
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 Apr 2016 01:01:44 +0000 (21:01 -0400)]
altosdroid: Split setup functions to separate dialog
Remove them from the options menu, handle all preferences through
listeners.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 Apr 2016 03:12:34 +0000 (23:12 -0400)]
altosdroid: Add idle mode monitoring, reboot. Start igniters
This adds three idle mode operations -- monitor idle, reboot flight
computer and test igniters. The igniter test isn't quite wired up.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 Apr 2016 22:50:58 +0000 (18:50 -0400)]
altos: Clear packet queue when starting packet master
This avoids overfilling the packet buffer when
disconnected. Applications using packet mode shouldn't expect that
output be saved across master sessions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 Apr 2016 22:49:45 +0000 (18:49 -0400)]
altos/telebt-v3.0: Flip CTS/RTS pins for BT module
These are wired backwards, so ask that the right pins be used, which
requires switching to software control of the pins.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 Apr 2016 22:48:47 +0000 (18:48 -0400)]
altos/stm32l: Add support for software-driven HW flow control
This allows applications to request that the flow control bits be
driven from software rather than hardware, permitting more flexible
pin configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 20 Jan 2016 07:53:27 +0000 (23:53 -0800)]
altos: Use TXE instead of TC for serial on STM32l
Using TXE allows for full-speed communication, rather than waiting for
each byte to be transmitted before inserting the next into the queue.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 Apr 2016 15:47:45 +0000 (11:47 -0400)]
Debug bits for telebt
Keith Packard [Fri, 22 Apr 2016 23:15:51 +0000 (19:15 -0400)]
altoslib: Don't try to drag lines around until map is loaded
When the transform is null, it's hard to draw lines.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 23:15:05 +0000 (19:15 -0400)]
altoslib: Report exceptions caught while opening launch sites URL
This just dumps them to stdout, which helps debug on Linux at least.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 23:00:46 +0000 (19:00 -0400)]
altoslib: Use feet per second for imperial speed
This is more useful during descent than miles per hour...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 22:53:32 +0000 (18:53 -0400)]
altosdroid: Run even without Bluetooth
This lets us view old state information on USB-only devices, or when
the bluetooth device can't be enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 22:52:42 +0000 (18:52 -0400)]
altosdroid: Redraw offline map when my location changes
Update the map view even if there isn't any current telemetry data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 21:32:10 +0000 (17:32 -0400)]
altosdroid: Track device location in app, not telemetry service
This means we get location even if there isn't a telemetry device
connected, making it possible to walk to old device locations
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 21:31:49 +0000 (17:31 -0400)]
Bump version to 1.6.3
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 02:37:35 +0000 (22:37 -0400)]
altosdroid: Can only use message once
And here I thought re-using the message was clever. That generates a
nice exception and crashes the program.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 01:32:50 +0000 (21:32 -0400)]
Add preliminary 1.6.3 release notes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 21 Apr 2016 00:27:47 +0000 (20:27 -0400)]
libaltos: Fix for Mac OS X El Capitan
USB enumeration for serial devices changed
Signed-off-by: Keith Packard <keithp@keithp.com>
Justin Vreeland [Thu, 21 Apr 2016 12:30:10 +0000 (08:30 -0400)]
Fix java class differing only by case
OSX and Windows cannot handle files with names differing only by
case. When these files are present in either there's a constant
unfixable change viewable in git status and git diff.
Since this code can be run and compiled on both platforms
names different only by case should be avoided.
Signed-off-by: Justin Vreeland <vreeland.justin@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 01:11:29 +0000 (21:11 -0400)]
Prepare for new Android release by updating version number
10->11
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 01:12:06 +0000 (21:12 -0400)]
AltosDroid play store keys have moved, update configure.ac
The actual build files were already updated, but the configure.ac bits
which detect that they are available were not.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Apr 2016 01:12:40 +0000 (21:12 -0400)]
Update java library version numbers
Prepare for 1.6.3 release.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 20 Apr 2016 03:19:59 +0000 (23:19 -0400)]
altos: avoid mixed declarations and code in ao_task.c
sdcc can't handle this.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 20 Apr 2016 03:18:46 +0000 (23:18 -0400)]
altoslib: switch from keySet() to keys() in altos map tiles
Android appears to not have the keySet() API in the same way that
regular java does, so use the alternate older keys() api instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 20 Apr 2016 03:17:50 +0000 (23:17 -0400)]
altoslib: Make AltosGPSSat implement Serializable
This is required to save state values in AltosDroid.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 20 Apr 2016 03:17:01 +0000 (23:17 -0400)]
altoslib: Add debugging to AltosPreferences.state() etc
This let me find why AltosDroid was losing the last state information
for each target.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 20 Apr 2016 03:15:26 +0000 (23:15 -0400)]
altosdroid: Don't set target location if lat/lon is MISSING
Otherwise, we get a nice pointer to some random location on the planet.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 13 Apr 2016 13:14:33 +0000 (06:14 -0700)]
altos/telefiretwo-v0.2: Change alarm names in comment
The PCB is labeled 'A' and 'B'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 13 Apr 2016 13:11:44 +0000 (06:11 -0700)]
altos/stmf0: Fix external interrupts
Missing a reserved address in the registers broke everything nicely,
but the priority values were also wrong - stm32f0 exposes 8 bits per
priority, like the stm32l, but it uses only the top two bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 7 Apr 2016 05:32:36 +0000 (22:32 -0700)]
Add TeleFireTwo v0.2 project
This is much like TeleFireTwo v0.1, with only one pyro channel and
added siren and strobe
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 6 Apr 2016 06:45:52 +0000 (23:45 -0700)]
altos/telelcotwo: Add idle timeout
Puts TeleLCOTwo in a low power state (drawing about 80µA) after a
timeout (default two minutes) to keep from killing the battery if the
device is left turned on.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 26 Dec 2015 04:46:40 +0000 (20:46 -0800)]
altos: Use simpler debounce logic for buttons
Instead of waiting for a while after the transition to decide if it
has stuck, signal the event right away and then ignore other
transitions for the debounce interval.
This seems to work just as reliably, but has the benefit of
eliminating button latency at press time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 25 Dec 2015 19:26:34 +0000 (11:26 -0800)]
altos: Add ao_lco_two.c; alternate LCO interface code
The LCO interface is likely to end up very device specific as the
interactions depends on the input devices. Here's a version for
TeleLCOTwo, which has two arming switches and a firing button.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 22 Dec 2015 05:52:31 +0000 (21:52 -0800)]
altos: Fix telefiretwo .gitignore
Was ignoring the wrong built files
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 22 Dec 2015 05:50:43 +0000 (21:50 -0800)]
altos: Add TeleLCOTwo firmware
The LCO side of a two-channel launch controller setup.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 22 Dec 2015 05:48:37 +0000 (21:48 -0800)]
altos: Support pad/lco boxes with fixed box numbers
This allows for a configuration without adjustable box numbers on
either end of the link, simplifying the UI.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 22 Dec 2015 05:47:10 +0000 (21:47 -0800)]
altos: Allow for pad boxes with different sensor configurations
This allows for a pad box without a resistor from power to each
FET. That resistor is needed to detect welded relays, but in a
solid-state system, that's not a possibility.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 18 Dec 2015 03:54:23 +0000 (19:54 -0800)]
altos: telefiretwo-v0.1 bits
Get this board running.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 18 Dec 2015 03:30:35 +0000 (19:30 -0800)]
altos: Add pad support for new telefire versions
Makes the voltage divider values configurable, and allows for pyro
channels that don't have the resistors necessary to check for a stuck
relay.
Also supports STM32L processors with wider GPIO registers, and uses
the new ao_gpio_set/clr_bits functions to fire igniters rather than
cc1111-specific code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 18 Dec 2015 03:29:36 +0000 (19:29 -0800)]
altos: Support telefire products in cc1200 driver
Need to disable the pad code while testing the radio.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 13 Apr 2016 13:16:01 +0000 (06:16 -0700)]
altos/detherm: Add servo driver
This just provides commands to test the servo with.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 6 Apr 2016 05:03:37 +0000 (22:03 -0700)]
altos/detherm: Add ms5607 to detherm
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 24 Dec 2015 07:15:16 +0000 (23:15 -0800)]
altos: Add easy mini plotting helper in test code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 18 Dec 2015 03:27:42 +0000 (19:27 -0800)]
altos: Add ao_gpi_set/clr_bits functions
These set or clear a group of bits in a single GPIO register all together.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 05:41:06 +0000 (22:41 -0700)]
altos/stmf0: Add pwm and exti drivers
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 05:40:23 +0000 (22:40 -0700)]
altos: Add detherm product
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 02:44:06 +0000 (19:44 -0700)]
doc: Note that EasyMega and TeleMega report A-D continuity
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 02:43:32 +0000 (19:43 -0700)]
altos/stmf0: Support HPE clock source
Allows the use of crystals instead of requiring USB.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 02:42:44 +0000 (19:42 -0700)]
altos/stmf0: Add SPI driver.
This also changes the DMA interface a bit so we can select for
interrupts on only the interesting channels.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 02:41:21 +0000 (19:41 -0700)]
altos: Use mini logging for detherm, just without ADC
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 02:40:19 +0000 (19:40 -0700)]
altos: Add Detherm log format (easymini without ADC)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 02:39:07 +0000 (19:39 -0700)]
altos: Allow for flight hardware without any ADC values
Detherm has no ADC connections, so we don't need to disable the ADC
when going to landed state.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 25 Mar 2016 01:25:33 +0000 (19:25 -0600)]
altos: Add one-byte SPI output routine for LPC and STM cores
This allows for SPI output at interrupt time, one byte at a time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 25 Mar 2016 01:28:16 +0000 (19:28 -0600)]
altos/lpc: Add fast timer
This offers a faster timer callback for higher-precision operation
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 26 Mar 2016 22:59:26 +0000 (15:59 -0700)]
altos/stm: Allow apps to define different stack size
While 512 bytes is a reasonable size, sometimes apps don't have that
much stack space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 26 Mar 2016 22:54:24 +0000 (15:54 -0700)]
altos/stm: Validate current task SP in interrupt by looking at PSP
We use a separate stack pointer for task code, which means we can
verify that it is in range in any interrupt handler. This adds checks
for the task stack (under #ifdef DEBUG) that run in ao_wakeup as well
as at every timer interrupt.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 26 Mar 2016 22:49:59 +0000 (15:49 -0700)]
altos/stm: Run scheduler code on interrupt stack
This provides a bit more room for tasks on their stack
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 22 Mar 2016 04:28:39 +0000 (22:28 -0600)]
altosui,telegps: Do not allow radio calibration to be edited
This leads to sorrow for almost everyone. If you want to edit this,
use a terminal program.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 26 Mar 2016 22:57:59 +0000 (15:57 -0700)]
altosuilib: Control map debugging output with Serial.debug
This uses the same debug control as the serial output to monitor map downloading
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 26 Mar 2016 22:57:21 +0000 (15:57 -0700)]
altoslib: use env var LAUNCH_SITES to override default URL
This makes it easier to debug new launch site data before uploading.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 21 Mar 2016 06:11:49 +0000 (23:11 -0700)]
libaltos: Fix warning in linux libaltos code
Just returned the wrong name of the value
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 21 Mar 2016 05:01:07 +0000 (22:01 -0700)]
altosuilib: Note that Windows now supports Bluetooth
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 21 Mar 2016 04:54:08 +0000 (21:54 -0700)]
altosui: Delay between polling for igniter status in Fire Igniters
This gives a remote like time to report the full status instead of
sending another request before the reply has been processed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 21 Mar 2016 04:52:53 +0000 (21:52 -0700)]
libaltos: Add Windows BT support. Split into separate source files.
Add Bluetooth support to Windows. Split libaltos into separate files.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 18 Mar 2016 18:17:46 +0000 (11:17 -0700)]
ao-bringup: Use dfu-util to install flash loader on chaoskey
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 18 Mar 2016 18:16:59 +0000 (11:16 -0700)]
altos/stmf0: Construct .bin files for flash loaders
This builds a .bin file which can be used with dfu-util instead of
using openocd to load the initial flash loader.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 18 Mar 2016 18:15:57 +0000 (11:15 -0700)]
ao-tools: Add ao-makebin
This constructs a raw binary or DFU format file for use with dfu-util,
which can be used with a bare STM processor to load code before the
boot loader is available.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 18 Mar 2016 17:52:03 +0000 (10:52 -0700)]
ao-tools/lib: Add ao_hex_image_cat function
This takes two images and constructs a third containing the union of
the contents along with 0xff bytes for any area between them.
Signed-off-by: Keith Packard <keithp@keithp.com>