]>
git.gag.com Git - hw/altusmetrum/log
Keith Packard [Tue, 27 Oct 2015 02:22:08 +0000 (11:22 +0900)]
Add ability to generate dk, mouser and other partslists
This starts with partslist.csv and generates per-vendor lists. The DK
version is in the format needed to directly import into the DK BOM tool.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 27 Oct 2015 00:17:53 +0000 (09:17 +0900)]
Add parts from MicroPeak
Battery holder
debug connector
ATtiny85
Orange LED
Switch
Two more resistor values
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 26 Oct 2015 05:50:02 +0000 (14:50 +0900)]
and I think I'm done for the first pass with adding mpn data!
Bdale Garbee [Mon, 26 Oct 2015 05:45:56 +0000 (14:45 +0900)]
many more attributes filled in, more to go
Keith Packard [Mon, 26 Oct 2015 04:40:52 +0000 (13:40 +0900)]
Add stand-up USB connector
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 26 Oct 2015 03:20:59 +0000 (12:20 +0900)]
filling in mpn, etc .. more to do!
Bdale Garbee [Mon, 26 Oct 2015 02:56:23 +0000 (11:56 +0900)]
have partslist targets depend on preferred-parts file to pick up updates
Bdale Garbee [Mon, 26 Oct 2015 02:53:21 +0000 (11:53 +0900)]
merge TeleMetrum to preferred parts, fix pintype in MS3021
Bdale Garbee [Mon, 26 Oct 2015 02:29:34 +0000 (11:29 +0900)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sun, 25 Oct 2015 03:32:49 +0000 (21:32 -0600)]
fold in parts from greenhouse board project
Bdale Garbee [Sun, 25 Oct 2015 02:42:05 +0000 (20:42 -0600)]
don't try to expand part data for the header line
Bdale Garbee [Sun, 25 Oct 2015 02:41:33 +0000 (20:41 -0600)]
quote all fields except quantity to avoid confusing LibreOffice Calc
Bdale Garbee [Sun, 25 Oct 2015 02:20:55 +0000 (20:20 -0600)]
merge in parts needed for EasyMini
Bdale Garbee [Sun, 25 Oct 2015 02:10:08 +0000 (20:10 -0600)]
merge in TeleMega parts, not all fields filled (no wifi on this flight!)
Bdale Garbee [Sun, 25 Oct 2015 02:09:56 +0000 (20:09 -0600)]
use AM variable in paths
Bdale Garbee [Sun, 25 Oct 2015 01:43:47 +0000 (19:43 -0600)]
implement filling of preferred parts data in partslist ouptut files
Bdale Garbee [Sun, 25 Oct 2015 01:43:12 +0000 (19:43 -0600)]
tweak ADC symbol
Bdale Garbee [Sat, 24 Oct 2015 22:06:00 +0000 (16:06 -0600)]
analog to digital converter for greenhouse project
Bdale Garbee [Wed, 14 Oct 2015 20:15:02 +0000 (14:15 -0600)]
script for extracting parts from a design to put in preferred parts db
Bdale Garbee [Wed, 14 Oct 2015 20:08:44 +0000 (14:08 -0600)]
augment preferred parts list with data from telebt and teledongle
Bdale Garbee [Wed, 14 Oct 2015 20:00:32 +0000 (14:00 -0600)]
regularize DEVICE field
Bdale Garbee [Wed, 14 Oct 2015 19:45:07 +0000 (13:45 -0600)]
correct SMA data, mark USB connector and MAX-7Q as provided by us
Bdale Garbee [Wed, 14 Oct 2015 19:39:28 +0000 (13:39 -0600)]
eliminate vendor attributes from LPC library symbol
Bdale Garbee [Wed, 14 Oct 2015 19:31:30 +0000 (13:31 -0600)]
resolve conflicting 22pF caps in preferred parts database
Bdale Garbee [Wed, 14 Oct 2015 19:22:50 +0000 (13:22 -0600)]
first cut at preferred parts database, from TeleGPS data
Keith Packard [Wed, 14 Oct 2015 05:51:16 +0000 (22:51 -0700)]
pcb.mk: Cp instead of mv .gbr to .ger in oshpark target
This avoids potential collisions if you do 'make oshpark zip'
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 14 Oct 2015 05:19:56 +0000 (22:19 -0700)]
Revert "remove bogus GND pin from STM32L151-48 symbol"
There actually is a ground pad on this part, and TeleMetrum has it
hooked up and everything.
This reverts commit
7a0638e84732978c71cc9c4d65c8a7b13ebc3e89 .
Bdale Garbee [Tue, 13 Oct 2015 22:53:26 +0000 (16:53 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Tue, 13 Oct 2015 22:50:15 +0000 (16:50 -0600)]
first cut at a shared Makefile template, only supports TeleGPS right now
Bdale Garbee [Thu, 8 Oct 2015 22:27:45 +0000 (16:27 -0600)]
D-shell connectors from cncfpga, reusing 9-pin for cortexelf
Bdale Garbee [Mon, 5 Oct 2015 00:20:15 +0000 (18:20 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Sun, 4 Oct 2015 10:53:25 +0000 (03:53 -0700)]
Add symbol and package for KL02 QFN-16
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 4 Oct 2015 10:52:40 +0000 (03:52 -0700)]
Add Freescale KL02 datasheets
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Sep 2015 15:15:01 +0000 (10:15 -0500)]
symbols/spdt: 'passive' isn't a valid pin type; 'pas' is the right one
Using an invalid pin type generates terrible exceptions from the drc2
checking function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Sep 2015 15:14:02 +0000 (10:14 -0500)]
scheme: Add gnet-drcam.scm
Forked from drc2, this adds checking for valid pintypes so that the
unconnected pin tests don't cause an exception with uninterpretable
backtrace.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 29 Sep 2015 00:30:50 +0000 (17:30 -0700)]
packages: Add footprint for vbrite edge-launch connectors (including BNC)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 29 Sep 2015 00:28:15 +0000 (17:28 -0700)]
packages: Add phoenix giant screw terminal footprints
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 13 Sep 2015 04:13:02 +0000 (22:13 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sun, 13 Sep 2015 04:12:47 +0000 (22:12 -0600)]
new stuff for full-sized SD card, etc
Keith Packard [Sun, 13 Sep 2015 04:09:29 +0000 (21:09 -0700)]
Add title-E-both symbol
This has copyrights for both hackers
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 12 Sep 2015 18:43:02 +0000 (11:43 -0700)]
Update TPS709 datasheet to Rev F.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 9 Jul 2015 00:43:09 +0000 (18:43 -0600)]
SD symbol, replace microSD.fp with .py file and arrange to auto generate
Bdale Garbee [Wed, 8 Jul 2015 17:21:03 +0000 (11:21 -0600)]
7805 symbol in TO-252AA package by default
Bdale Garbee [Wed, 8 Jul 2015 16:19:21 +0000 (10:19 -0600)]
more stuff for test stand, including TO-252AA symbol+footprint, INA125 symbol
Bdale Garbee [Sun, 21 Jun 2015 00:46:10 +0000 (18:46 -0600)]
add more attributes to partslistgag for AC BOM creation
Bdale Garbee [Tue, 26 May 2015 03:00:55 +0000 (21:00 -0600)]
footprint for CR2032 battery holder
Bdale Garbee [Tue, 26 May 2015 02:48:18 +0000 (20:48 -0600)]
data sheet for CR2032 battery holder used on greenhouse board
Bdale Garbee [Tue, 19 May 2015 22:12:52 +0000 (16:12 -0600)]
Raspberry Pi v2 GPIO header, 40 pin, plus typo fix in 26 pin header
Bdale Garbee [Tue, 19 May 2015 22:04:08 +0000 (16:04 -0600)]
old-style Raspberry Pi header, 26 pin
Bdale Garbee [Tue, 19 May 2015 18:04:10 +0000 (12:04 -0600)]
40 pin header for R-PI v2 GPIO / HAT boards
Bdale Garbee [Tue, 19 May 2015 17:39:22 +0000 (11:39 -0600)]
rename symbol dir for consistency with datasheets, add 24C32 datasheet
Bdale Garbee [Tue, 19 May 2015 17:37:30 +0000 (11:37 -0600)]
new symbol for Raspberry PI "HAT" EEPROM parts
Bdale Garbee [Sat, 18 Apr 2015 19:52:44 +0000 (13:52 -0600)]
footprint for diode used in greenhouse project relay snubbers
Bdale Garbee [Sat, 18 Apr 2015 19:08:28 +0000 (13:08 -0600)]
footprint for relay used in greenhouse project
Bdale Garbee [Fri, 17 Apr 2015 18:18:33 +0000 (12:18 -0600)]
footprint for fuse holder
Bdale Garbee [Fri, 17 Apr 2015 18:14:47 +0000 (12:14 -0600)]
footprint for littlefuse pcb-mount fuse holder - greenhouse project
Bdale Garbee [Fri, 17 Apr 2015 17:27:30 +0000 (11:27 -0600)]
general purpose rectifier data sheet for transistor relay drivers
Bdale Garbee [Fri, 17 Apr 2015 17:20:57 +0000 (11:20 -0600)]
5v coil AC contact relays for greenhouse project
Bdale Garbee [Fri, 17 Apr 2015 17:11:28 +0000 (11:11 -0600)]
10-bit A/D with I2C interface - greenhouse light sensor
Bdale Garbee [Fri, 17 Apr 2015 17:09:35 +0000 (11:09 -0600)]
photocell data sheet - greenhouse light sensor
Bdale Garbee [Fri, 3 Apr 2015 01:27:12 +0000 (19:27 -0600)]
footprint for 4ucon 12x12 mm push-button switches
Bdale Garbee [Fri, 3 Apr 2015 01:16:39 +0000 (19:16 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 3 Apr 2015 01:16:22 +0000 (19:16 -0600)]
meh
Bdale Garbee [Fri, 3 Apr 2015 01:12:50 +0000 (19:12 -0600)]
data sheet for 4ucon 12x12 mm push-button switches 20571, 18573
Bdale Garbee [Tue, 24 Mar 2015 09:07:01 +0000 (10:07 +0100)]
cobble up a USA-standard 5-way Stratocaster switch symbol
Bdale Garbee [Tue, 24 Mar 2015 08:44:56 +0000 (09:44 +0100)]
DPDT switch symbol pulled from gedasymbols.org
Bdale Garbee [Tue, 24 Mar 2015 08:41:12 +0000 (09:41 +0100)]
hard to believe we haven't ever used a potentiometer in a schematic...
Keith Packard [Fri, 20 Mar 2015 20:28:40 +0000 (13:28 -0700)]
Split out usb A male footprint into two styles
On using a hole for the clips, one designed to wrap around the board
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 20 Mar 2015 20:28:13 +0000 (13:28 -0700)]
Revert "Rework the usbAmale footprint to use pads near the edge of the board"
This reverts commit
699bbfa097847f00e3c951f7b9eabb46194d53b4 .
Keith Packard [Fri, 20 Mar 2015 20:28:04 +0000 (13:28 -0700)]
Revert "Fix USB A connector pads to expose copper"
This reverts commit
d59ca2f81a59ac11b4515a8cc6eb2ddf3439e9c6 .
Keith Packard [Fri, 20 Mar 2015 20:26:06 +0000 (13:26 -0700)]
Fix USB A connector pads to expose copper
This was mis-specified causing the solder mask to nearly cover the pad
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 20 Mar 2015 20:25:41 +0000 (13:25 -0700)]
Add pin 1 marking for s-pwson-n8 package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 20 Mar 2015 20:24:43 +0000 (13:24 -0700)]
Add footprint and data sheet for ti TPS71401
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 3 Mar 2015 23:54:56 +0000 (16:54 -0700)]
data sheet for new meas spec temp/pres/humidity sensor
Keith Packard [Wed, 25 Feb 2015 06:28:24 +0000 (22:28 -0800)]
Add value to 3904 transistor symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 25 Feb 2015 06:27:58 +0000 (22:27 -0800)]
Add packages used by usbtrng
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 25 Feb 2015 06:22:30 +0000 (22:22 -0800)]
Rework the usbAmale footprint to use pads near the edge of the board
This places ink on the top of the board to show where the tabs are
going to line up on the edge of the board, and places metal on the
solder side of the board to provide something to attach the tabs to
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 23 Feb 2015 00:46:42 +0000 (16:46 -0800)]
SOD323 diode footprint needs cathode on pin 2, not pin 1
The cathode marker was a small dot, which could easily get lost, and
it was on the wrong pin. Make it a nice line that is next to pin 2.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 20:50:11 +0000 (21:50 +0100)]
Add datasheet for On Semiconductor NSR0240H0D schottky diode
Candidate for usbtrng.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 20:43:18 +0000 (21:43 +0100)]
Add application note for AP3012 boost converter
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 14:57:39 +0000 (15:57 +0100)]
Add NXP PMBT3904VS dual NPN transistor
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:39:59 +0000 (06:39 +0100)]
Add AP3012 boost regulator symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:39:45 +0000 (06:39 +0100)]
Add 5-pin connector symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:39:28 +0000 (06:39 +0100)]
Add STM32F042-28 (28-pin QFN) symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:38:58 +0000 (06:38 +0100)]
remove bogus GND pin from STM32L151-48 symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:37:43 +0000 (06:37 +0100)]
Add 5-hole 50mil pin header footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:37:16 +0000 (06:37 +0100)]
Add ufqfpn-28 package (4x4 mm)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:36:06 +0000 (06:36 +0100)]
Add DIP16 package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:35:04 +0000 (06:35 +0100)]
Add MicroChip MCP601 op-amp datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:34:35 +0000 (06:34 +0100)]
Add Liteon 7-segment LED datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:34:05 +0000 (06:34 +0100)]
Add AP3012 boost regulator data sheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:33:48 +0000 (06:33 +0100)]
Add ATtiny 25/45/85 datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 24 Jan 2015 04:25:59 +0000 (20:25 -0800)]
Add 7-segment LED display symbol (uses DIP14 footprint)
Bdale Garbee [Mon, 26 Jan 2015 05:27:51 +0000 (22:27 -0700)]
footprints for 1802 project, symbols for greenhouse board
Bdale Garbee [Sat, 24 Jan 2015 21:00:45 +0000 (14:00 -0700)]
multi-digit 7-segment LED displays
Bdale Garbee [Sat, 24 Jan 2015 19:33:56 +0000 (12:33 -0700)]
try to fix the hex keypad symbol, rename footprint
Bdale Garbee [Sat, 24 Jan 2015 18:25:14 +0000 (11:25 -0700)]
another broken symbol thanks to a trailing blank line .. argh
Bdale Garbee [Sat, 24 Jan 2015 18:05:52 +0000 (11:05 -0700)]
wow, gschem is picky about trailing blank lines in symbols .. who knew?
Bdale Garbee [Sat, 24 Jan 2015 18:03:23 +0000 (11:03 -0700)]
add datasheet attributes to recent symbols
Bdale Garbee [Sat, 24 Jan 2015 17:59:40 +0000 (10:59 -0700)]
more parts for 1802 project