Alexandru Csete [Thu, 22 Jul 2010 01:27:46 +0000 (18:27 -0700)]
gnuradio-core: export missing public methods in gr.agc2
Alexandru Csete:
The gr_agc2 block has public methods to set and get the AGC levels and
rates; however, only a few of these interfaces are exported to Python
and none of them are available in GRC.
The attached patch adds the missing public methods to gri_agc2_cc.i
and gri_agc2_ff.i and defines the corresponding callbacks in the
gr_agc2_xx.xml GRC block.
* trondeau/qtclock:
From my reading, we should never need to define the timespec struct (so we will wait until this bites me).
Checking for clock_gettime and timespec defined; use gettimeofday if not, but put it into a timespec structure.
Reformatting highResTimeFunction.h for better readibility.
gr-wxgui: fix non-gl scope sink only updating one channel
This fixes a bug where, when using nongl scopesink, only the real part
of a complex input is shown. After applying this patch, both Ch1 and
Ch2 can be seen on the scope display.
* Adds new scope window trigger, TRIG_MODE_STRIPCHART
* Allows config file selection of whether background window sinks still run
* Allows config file selection of default trigger mode
* Allows config file selection of default waterfall sink color mode
[wxgui]
#Setting this to true prevents the window sinks from stopping when they
#are not displayed, as when they are in a notebook with a hidden tab.
run_always = False
This new method on usrp2.sink_* causes the first TX sample data to be
sent at the FPGA clock time specified, with all further data immediately
following.
u = usrp2.sink_32fc() # or 16sc
...configure sink here...
u.sync_to_pps()
...delay a second for PPS to have happened
u.start_streaming_at(int(100e6)) # start TX stream one second later
...start flowgraph here...
If this function is not called, all transmit data will be sent
immediately (the prior behavior).
* maint:
Fixed WBX RX PLL enable
Refactor WBX and adf4350 to avoid passing usrp pointer
Clean up annoying class structure in wbx
Fixing wbx to use _refclk_freq()
Typo in error message
* fix/wbx_refclock:
Fixed WBX RX PLL enable
Refactor WBX and adf4350 to avoid passing usrp pointer
Clean up annoying class structure in wbx
Fixing wbx to use _refclk_freq()
Typo in error message
* gnuradio/wip/udp_source_sink:
gnuradio-core: update copyrights
gnuradio-core: allow swig to handle exceptions in UDP source/sink
grc: update UDP source and sink block wrappers
Simplify USE_SELECT usage
Return immediately when using d_residual.
Defend against a peer that sends an invalid message length.
Move initialization of select timeout
Correct update of d_temp_offset (parallel construction)
Identify memory leaks that occur on error conditions
Use -1 as file descriptor "not open" value instead of 0
Add additional conditionalization of networking includes
Flush pending errors in gr_udp_sink on disconnect()
Rework UDP source and sink, with incompatible API changes
Updates to udp source/sink (select(), wait, cleanup)
Discard data in gr_udp_sink until receiver is started.
Use getaddrinfo in gr_udp_{source,sink}
Changes to gr_udp_{source,sink} for MinGW
Ignore ENOPROTOOPT return from setsockopt(SO_LINGER)
Johnathan Corgan [Tue, 18 May 2010 02:33:46 +0000 (19:33 -0700)]
Merge branch 'wip/burx_support'
* wip/burx_support:
-Updated to allow BURX support to be built into standard txrx.bin
Once and for all, here is the properly updated Makefile.am for the apps
Updated db_bitshark_rx.c to the proper version that includes the
Change default bandwidth to 25 MHz to match maximum USRP2 bandwidth
Update incorrectly checked in Makefile.am
usrp: Cleanup for merge of bitshark daughterboard code
Including bitshark_rx.h header file for USRP2 build
Fixed issue with with wrong Makefile.am files being copied
Add support for the Bitshark USRP RX (BURX) daughterboard for the USRP2.
Add support for the Bitshark USRP RX (BURX) daughterboard for the USRP1.
JohnOrlando [Mon, 17 May 2010 21:15:49 +0000 (16:15 -0500)]
-Updated to allow BURX support to be built into standard txrx.bin
image
-Also corrected db_bitshark_rx.c to the current version (previous
git push error) that includes the needed delays after I2C commands
Johnathan Corgan [Fri, 14 May 2010 17:31:19 +0000 (10:31 -0700)]
Merge remote branch 'bitshark/burx_support' into wip/burx_support
* bitshark/burx_support:
Once and for all, here is the properly updated Makefile.am for the apps
Updated db_bitshark_rx.c to the proper version that includes the
Johnathan Corgan [Fri, 14 May 2010 02:20:27 +0000 (19:20 -0700)]
build: force use of ltmain.sh from libtool 2.2.6b
Don Ward:
"The supplied version of ltmain.sh does not handle interlibrary
dependencies on Windows. I have attached a diff file showing
the slight differences between the ltmain.sh in the tarball
(2.2.6b Debian-2.2.6b-2ubuntu1, which fails) and the ltmain.sh
downloaded from packages.debian.org (plain 2.26b). It looks
like it was broken in Ubuntu 2.2.6a-3 (change log says "Don't
pull in depedency libs when linking a binary"). GNU Radio builds
ok if I run ./bootstrap locally."
JMC: This file (ltmain.sh) has not previously been under version
control and would be copied over (or symlinked) by the bootstrap
process. With a version now in the repository, we'll need to
ensure it stays fresh, likely at the same time we check for
updated config.guess and config.sub files.
Johnathan Corgan [Fri, 14 May 2010 02:10:44 +0000 (19:10 -0700)]
gnuradio-core: Disable (temporarily) interpolator tap calculation
There is some breakage with GR_FORTRAN / AC_PROG_F77 when running
bootstrap. The gen_interpolator_taps binary is only needed to
regenerate the MMSE interpolator taps, which hasn't been done for
several years. Disable this until proper fix can be done.
JohnOrlando [Thu, 13 May 2010 23:03:13 +0000 (18:03 -0500)]
Updated db_bitshark_rx.c to the proper version that includes the
delays when sending back-to-back I2C commands, as well as the proper
command when setting the bw (previous blunder with git resulted in
the wrong version on this branch)
Johnathan Corgan [Wed, 12 May 2010 01:00:19 +0000 (18:00 -0700)]
Merge branch 'master' into wip/burx_support
* master: (39 commits)
Add gru.hexshort to deal with short hex constants
Assign USB PID for Hans de Bok
Add missing buffer allocator hint to gr_ofdm_sampler.cc
Really fix the missing include for boost::bind
gr-wxgui: Added additional color table entries
Missed updates for omnithread/mblock removal
Remove omnithreads library.
Remove mblock library. We hardly knew 'ye.
Convert gr-audio-portaudio to Boost via gruel
Further updates for removing omnithreads
Update build configuration for OSX omnithreads changeover
Add missing include file for boost::bind
Convert gcell to use boost::threads instead of omnithread.
Fix sequence error indication after stopping then restarting streaming on USRP2.
initial move from mld_threads to gruel:: namespace threads and such
Initial changes to remove mld_thread and instead use gruel:: namespace classes
Fixing doxygen warnings from arb_resampler. Also, removed set_taps from public
Fixing doxygen warnings from channelizer block.
Fixing documentation to get rid of doxygen warnings.
Adding documentation for fff version of othe PFB clock sync algorithm.
...