]>
git.gag.com Git - fw/altos/log
Keith Packard [Sun, 13 Nov 2011 02:30:56 +0000 (18:30 -0800)]
altos: debounce buttons
Provide API to clear out any button events that happen during startup,
and then discard button events 'too close' together.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 13 Nov 2011 02:29:38 +0000 (18:29 -0800)]
altos: Build TeleTerra v0.2 by default
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 13 Nov 2011 02:10:18 +0000 (18:10 -0800)]
altosui: Deal with serial port exceptions a bit better
This catches a few exceptions and tries to make sure the serial port
is closed afterwards.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 12 Nov 2011 06:30:17 +0000 (22:30 -0800)]
altos: Make ao_xmem funcs require __xdata void * instead of casting
Having an explicit cast in the ao_xmem wrapper macros caused the
compiler to generate garbage values for pdata addresses, making the
upper byte 0x00 instead of the required 0xf0. Removing the
casts from the ao_xmem macros exposed this problem, so a new
PDATA_TO_XDATA macros was added, along with a CODE_TO_XDATA macro
which serve to cast pointers, with suitable address modifications, so
that things work again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 12 Nov 2011 06:24:22 +0000 (22:24 -0800)]
altosui: Make UI Look&Feel configurable
Saves the preferred style and uses that for all current and new windows.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 12 Nov 2011 01:18:08 +0000 (17:18 -0800)]
altos: Shrink Skytraq NMEA parsing - common nmea_finish code
This shares the checksum testing across all three lines, saving
another 103 bytes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 12 Nov 2011 01:11:39 +0000 (17:11 -0800)]
altos: shrink Skytraq NMEA parsing more
This cuts another 78 bytes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 12 Nov 2011 00:54:18 +0000 (16:54 -0800)]
altos: Shrink code size of Skytraq NMEA parser
Just mess around with the code to make it smaller. These patches save
173 bytes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 27 Oct 2011 08:01:11 +0000 (01:01 -0700)]
altos: A bunch of missing .gitignore files (mostly)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 27 Oct 2011 07:57:45 +0000 (00:57 -0700)]
altos: Add i2c driver for avr chip
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 27 Oct 2011 07:49:23 +0000 (00:49 -0700)]
altosui: Only update GPS data when new GPS information arrives
Track which telemetry packets are actually producing new GPS
information and only update the GPS average position and count of
stable GPS reports with new GPS info, instead of on every telemetry packet.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 27 Oct 2011 07:35:35 +0000 (00:35 -0700)]
altos: Fix distance/bearing computations. Deal with large values
Lots of little math errors dealing with large distances; easily tested
as the GPS currently reports lat 24 lon 121, which is a long ways from
Portland.
Now reports distances in km when large, otherwise in m.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 27 Oct 2011 05:49:11 +0000 (22:49 -0700)]
altos: Bring up basic TeleTerra v0.2 UI
Lots of fun stuff here -- multiple panes of information.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 23 Oct 2011 22:24:02 +0000 (15:24 -0700)]
altos: Flip button IRQ initialization around
This matches what the docs suggest
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 23 Oct 2011 22:20:50 +0000 (15:20 -0700)]
altos: Fix battery voltage computation.
Full scale is 4.95V, not 3.333V.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 23 Oct 2011 21:51:32 +0000 (14:51 -0700)]
altos: Add battery voltage sampling driver
For devices without a full ADC compliment, this just samples the
battery pin and converts to mV.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 23 Oct 2011 21:08:59 +0000 (14:08 -0700)]
altos: Add button driver and sample user
Hook up the teleterra buttons and have them beep
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 23 Oct 2011 19:55:35 +0000 (12:55 -0700)]
src/teleterra-v0.2: Initialize more hardware
Initialize the flash storage and flight state reporting beeper.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 23 Oct 2011 19:51:05 +0000 (12:51 -0700)]
altos/teleterra_0_2: Initialize LCD driver
Initialize the LCD for testing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 21 Oct 2011 21:58:26 +0000 (14:58 -0700)]
src/teleballoon-v1.1: Use Tm style initial state stuff
Come up in pad mode unless someone talks to us while in idle mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 21 Oct 2011 18:30:43 +0000 (11:30 -0700)]
altos: Add teleballoon-v1.1 directory
This is an alternate firmware load for telemetrum v1.1.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Oct 2011 05:54:40 +0000 (22:54 -0700)]
altos: Add LEGACY_MONITOR defines to more programs
Make all monitoring programs define whether they want all of the old
telemetry formats too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Oct 2011 05:54:02 +0000 (22:54 -0700)]
ao-bringup: Make it build with source restructuring
Source code all moved around, need to find the header files in new directories.x
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 05:30:53 +0000 (23:30 -0600)]
altos: Add TeleTerra v0.2 product
This includes most of the necessary drivers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 05:29:24 +0000 (23:29 -0600)]
altos: oops -- forgot to add the cc1111 string code
This is required for all cc1111 builds now; it provides xdata string
functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 05:28:02 +0000 (23:28 -0600)]
altos: Split out arch-specific bits of LCD driver
The arch-specific section just puts a single nibble to the device.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 02:58:04 +0000 (20:58 -0600)]
Bump to 1.0.9.3
TeleScience and TelePyro now work.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 00:48:55 +0000 (18:48 -0600)]
altos/telescience: Add more header dependencies
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 00:48:11 +0000 (18:48 -0600)]
altos/avr: telescience doesn't have room for the flash write code
This is useful for debugging the SPI and flash drivers, but not
necessary in production code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 00:45:51 +0000 (18:45 -0600)]
altos/avr: Must leave space for init stack in ram
The stack used during system initialization lives at the top of RAM,
so leave some space for that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 00:44:48 +0000 (18:44 -0600)]
altos/avr: Shrink default stack size to use less ram
Not that we have any way of knowing how much stack we're using, but at
least this seems to work.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 00:13:00 +0000 (18:13 -0600)]
altos: Allow ao_science_slave to not log data
This is mostly for debugging with flash writes disabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 00:11:56 +0000 (18:11 -0600)]
altos: Make HAS_STORAGE_DEBUG define consistent
This allows products to include the 'w' command for testing flash
writing as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Oct 2011 00:10:45 +0000 (18:10 -0600)]
altos/avr: Clear SPI receive buffer before clocking new data in
I don't know why this is necessary, but the receive buffer gets
'extra' data added somehow.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 11 Oct 2011 23:44:40 +0000 (17:44 -0600)]
altos/avr: Pull-up on the SPI slave select pin
This makes the board work even when disconnected from TeleMetrum.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 11 Oct 2011 23:44:02 +0000 (17:44 -0600)]
altos/avr: Register stdio handler when using serial for stdin
This code was left in a bit of a mess; just clean it up.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 11 Oct 2011 23:42:24 +0000 (17:42 -0600)]
altos/avr: telescience does not have a serial port
The USART is used for SPI to talk to the flash part.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 11 Oct 2011 23:39:35 +0000 (17:39 -0600)]
altos/avr: Make ao_arch_critical argument be a statement
Wrap the argument to ao_arch_critical in do { } while (0); to make
sure it gets correctly checked as a statement.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 11 Oct 2011 23:39:06 +0000 (17:39 -0600)]
altos/avr: Print newline after dumping ADC values
Cleans up the formating a bit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 11 Oct 2011 22:03:04 +0000 (16:03 -0600)]
altos/avr: SPI mutex is now held by the caller, not the SPI driver
SPI transactions generally require a read followed by a write, with
the chip select held the whole time. As a result, the SPI bus must be
held across multiple transactions. To make this reliable, the caller
must hold the SPI mutex, instead of the underlying SPI driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 9 Oct 2011 17:09:25 +0000 (11:09 -0600)]
altosui: Deal with missing state transitions in FlightStats window
Any missing start/end times are pinned to the end of the flight.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 9 Oct 2011 16:55:04 +0000 (10:55 -0600)]
altosui: Deal with telem data that goes backwards in time
The new telemetry stuff can send packets with older timestamps, so
sort telem packets read from disk to create an in-order record of the flight.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 9 Oct 2011 16:21:56 +0000 (10:21 -0600)]
altos: Respond to telemetry rate changes immediately
Instead of waiting for the previous telemetry interval to expire,
immediately switch to the new telemetry rate. This will provide
more telemetry data early in the boost.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 9 Oct 2011 04:19:52 +0000 (22:19 -0600)]
altos: Improve TM v1.0 apogee estimate
v1.0 boards have noisy accelerometer data caused by interactions
between RF transmission and the accelerometer measurements; this noise
generates a negative bias in the accelerometer readings. The net
effect is that the estimated speed is lower than the actual speed,
causing early an apogee estimate.
By increasing the sigma value for accelerometer data, the kalman
filter 'trusts' the acceleration data less, putting more weight on the
barometer data. This causes the estimated time of apogee to be closer
to the correct value.
This reduces the response to changes in acceleration.
This new value is applied solely to TeleMetrum v1.0 boards. v1.1
boards correct for this error, and hence can use the correct sigma
value for the accelerometer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 9 Oct 2011 03:31:34 +0000 (21:31 -0600)]
Bump to 1.0.9.2
(1.1 RC 2). Flown at Oktoberfest 2011 on 10/09/2011 (we hope)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Oct 2011 22:07:57 +0000 (16:07 -0600)]
altosui: Remove igniter voltages from chart.
These are just annoying; when we add the ability to turn stuff on/off
on the fly, we can add them to the list of available items.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Oct 2011 17:51:05 +0000 (11:51 -0600)]
altos: Ignore ejection bumps when doing boost re-detect
An ejection charge looks an awful lot like an extra (really small)
motor burn. Ignore them by averaging the acceleration during
fast/coast using a /64 exponential decay filter.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Oct 2011 17:50:24 +0000 (11:50 -0600)]
ao-telem: Add new program to convert telem data to ascii
This reads telem files and displays them in ascii form. It's not done,
and it's not documented, but it's a start.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Oct 2011 17:46:38 +0000 (11:46 -0600)]
altosui: Allow for multiple instances of each state in the graph
With the new boost re-detect code, we can get multiple instances of
boost/fast/coast, so make sure each are displayed in the graph.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Oct 2011 17:43:37 +0000 (11:43 -0600)]
altosui: Max acceleration across boost instead of all ascent
This ignores ejection bumps, making the max acceleration far more useful.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Oct 2011 15:53:09 +0000 (09:53 -0600)]
altos: Write xdata versions of memory functions
These are significantly smaller than the general pointer versions from
libc on the cc1111.
Signed-off-by: Keith Packard <keithp@keithp.com>
Conflicts:
src/Makefile.proto
src/cc1111/ao_adc.c
src/cc1111/ao_packet_master.c
src/core/ao.h
Fix up the new makefiles
Keith Packard [Fri, 7 Oct 2011 14:41:56 +0000 (08:41 -0600)]
Merge remote-tracking branch 'origin/simple-quiet' into multiarch
Conflicts:
configure.ac
fix version number
Keith Packard [Fri, 7 Oct 2011 14:40:14 +0000 (08:40 -0600)]
Merge remote-tracking branch 'uniarch/master' into multiarch
Conflicts:
src/core/ao_cmd.c
Use ao_arch_reboot after waiting for a second
Keith Packard [Wed, 28 Sep 2011 04:06:54 +0000 (21:06 -0700)]
altos: TM: Don't turn on packet slave mode until idle/invalid state
Leave the packet link disabled until we've checked the
accelerometer. That way, we cannot accidentally get to idle mode when
the rocket is on the rail.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 26 Sep 2011 18:50:28 +0000 (11:50 -0700)]
altos: Delay reboot by a second to avoid re-entering idle mode
TM and Tm go into idle mode if they receive a packet after boot
time. When tebooting the device over the packet link, the packet
master would be (rapidly) polling the device for additional data and
so the device would invariably receive a packet during bootup and go
into idle mode again.
Delay the reboot by a second to give the controller time to disable
the master end of the packet link.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Oct 2011 14:34:59 +0000 (08:34 -0600)]
Merge remote-tracking branch 'origin/master' into multiarch
Conflicts:
configure.ac
Fix version number and location of ao.h header
Bdale Garbee [Tue, 27 Sep 2011 06:59:08 +0000 (00:59 -0600)]
add run-time dependency on libjfreechart-java
Bdale Garbee [Sat, 24 Sep 2011 21:34:59 +0000 (15:34 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Tue, 30 Aug 2011 22:59:53 +0000 (16:59 -0600)]
include 1.0.1 release notes in docs, closes: #642705
Keith Packard [Fri, 23 Sep 2011 17:24:33 +0000 (10:24 -0700)]
altos: Debug code for telepyro doesn't fit in telescience
Just too many strings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 22 Sep 2011 06:21:04 +0000 (23:21 -0700)]
Dump test conversion of ADC0
Keith Packard [Thu, 22 Sep 2011 05:54:56 +0000 (22:54 -0700)]
Dump ADC registers
Keith Packard [Thu, 22 Sep 2011 01:13:55 +0000 (18:13 -0700)]
altos: Fix make-kalman to run under dash
Dash can't deal with >&, so use the old-school > file 2>&1
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 21 Sep 2011 22:42:52 +0000 (16:42 -0600)]
fix bashism that prevents building with /bin/sh->/bin/dash
Bdale Garbee [Wed, 21 Sep 2011 22:42:22 +0000 (16:42 -0600)]
add missing sense_h entry in TelePyro table
Keith Packard [Wed, 21 Sep 2011 21:24:30 +0000 (14:24 -0700)]
altos: missing ao_log_single.c
Neglected to add this file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 21 Sep 2011 18:30:43 +0000 (11:30 -0700)]
altos: Add TelePyro v0.1 support
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 21 Sep 2011 18:40:56 +0000 (11:40 -0700)]
altos: Support staging by going back to boost as needed
Detect additional motor burns by looking for high positive
acceleration in coast or fast modes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 21 Sep 2011 18:39:24 +0000 (11:39 -0700)]
altos: Pre-compute RDF packet len at compile time
Instead of computing the RDF packet len at run time, which takes a
pile of code space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 21 Sep 2011 18:36:11 +0000 (11:36 -0700)]
altos: SPI slave code is now per-product
We can't write general purpose SPI slave code as we must eliminate
any latency because the SPI ports have no buffering.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 17 Sep 2011 01:27:56 +0000 (18:27 -0700)]
Update to version 1.0.2
Bdale is planning to fly this version on 9/17.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 4 Sep 2011 15:49:16 +0000 (08:49 -0700)]
altos: Silence radio while firing igniters
Hold the radio mutex while firing igniters to reduce potential
interactions between the two.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 4 Sep 2011 15:48:05 +0000 (08:48 -0700)]
altos: Delay restart of RDF at apogee
Instead of immediately trying to send RDF at apogee, start it after
the usual RDF interval to avoid doing RDF while firing the apogee igniter.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 30 Aug 2011 22:59:53 +0000 (16:59 -0600)]
include 1.0.1 release notes in docs
Keith Packard [Mon, 29 Aug 2011 21:22:19 +0000 (14:22 -0700)]
altos: Split avr clock initialization to ao_clock.c
This will be shared with the attiny code for TeleTerra v0.1
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 29 Aug 2011 00:03:26 +0000 (17:03 -0700)]
altos: don't beep igniter continuity for telenano
Without any igniters, it's not nice to annoy people.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 23:55:55 +0000 (16:55 -0700)]
altos: Report continuity in telebt
Report continuity values from remote altimeter
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 23:39:41 +0000 (16:39 -0700)]
altos: add 'report' to telebt
This beeps out flight state changes and max altitude at landing, just
like the altimeter.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:50:30 +0000 (15:50 -0700)]
altosui: Report error message back from libaltos
This includes changing all of the error dialogs to show the error
message rather than just the file name.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:50:01 +0000 (15:50 -0700)]
altosui: Add bluetooth bits back in
Stub out functions on mac/windows for now.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:45:05 +0000 (15:45 -0700)]
altos: Add the BT serial debug code back in, disabled
This code is useful whenever the BT stuff is acting up, so just leave
the source in place, turned off by default.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:43:32 +0000 (15:43 -0700)]
altos: Add pragma to eliminate unreachable code warning on SDCC
This pragma was removed as GCC doesn't support it; make it conditional
on SDCC so that we eliminate a warning message.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:42:25 +0000 (15:42 -0700)]
altos: Blink on telem packet receive instead of toggle
Toggling the LED was too confusing; just blink for 100ms each time a
packet comes in.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:40:40 +0000 (15:40 -0700)]
altos: Remove RSSI reporting from telebt
Telebt uses one LED for bluetooth connection and the other for telem
packet reception leaving none for RSSI.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:38:12 +0000 (15:38 -0700)]
altos: Add RSSI blinking to new-style telemetry code
Pull the RSSI data out locally and set the RSSI led blinking when
using the variable-length TELEM output mechanism.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:20:41 +0000 (15:20 -0700)]
Bump version to 1.0.9.0
Make it distinct from any production version
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Aug 2011 22:18:29 +0000 (15:18 -0700)]
altos: Start logging telemetry data right at boot time
Anything logging telemetry data should just start logging packets as
soon as they boot.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 28 Aug 2011 19:39:37 +0000 (13:39 -0600)]
update changelogs for Debian build
Keith Packard [Sat, 27 Aug 2011 22:19:43 +0000 (15:19 -0700)]
altos: Share log code between telescience and telebt. Add telebt log
Telescience and telebt both log data in 32-byte chunks, so share some
code which manages that between the two products. Add simple telemetry
logging to telebt.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Aug 2011 20:30:34 +0000 (13:30 -0700)]
altosui: launch controller button needs to move over
monitor idle was inserted into position 2,2
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Aug 2011 20:28:01 +0000 (13:28 -0700)]
altos: Fix up telelaunch Makefile
Adding all of the mising sources
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Aug 2011 20:27:28 +0000 (13:27 -0700)]
altos: Add HAS_LOG for products that log to eeprom
Some products have eeprom for config, but none for logging (like telelaunch)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Aug 2011 20:27:00 +0000 (13:27 -0700)]
altos: ao_launch belongs in cc1111
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Aug 2011 20:25:23 +0000 (13:25 -0700)]
altos: add ao_aes/radio_cmac to tidongle, teledongle and telebt
All of these can do the telelco stuff at this point.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Aug 2011 20:24:41 +0000 (13:24 -0700)]
altos: move igniter defines back to ao_pins.h
so that ao_launch gets them too
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Aug 2011 19:42:10 +0000 (12:42 -0700)]
altos: Add makefile for telelaunch
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 2 Aug 2011 05:45:43 +0000 (22:45 -0700)]
altosui: Hook up the launch controller UI from the main button box
Provide a button to start the launch controller UI.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 2 Aug 2011 00:08:24 +0000 (17:08 -0700)]
altosui: Add primitive UI for TeleLaunch
Display status along with arm and fire buttons.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 2 Aug 2011 00:06:49 +0000 (17:06 -0700)]
altos: Keep relay closed while firing launcher
Instead of opening the relay while checking the desired state, keep it
closed until the state goes off.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 22 Jul 2011 05:25:45 +0000 (22:25 -0700)]
altos: Finish up primitive telelaunch protocol
This adds two commands to teledongle, one to query and one to actually
fire the igniter. These will (eventually) want to be replaced with
something nicer.
Signed-off-by: Keith Packard <keithp@keithp.com>