]>
git.gag.com Git - fw/altos/log
Keith Packard [Tue, 9 Sep 2014 16:09:22 +0000 (09:09 -0700)]
altos/easymega: Set USB PID for EasyMega to 0x0028
It was using 0x0023, which is for TeleMega. 0x0028 is what's listed in
usbvidpid.h.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 9 Sep 2014 16:02:51 +0000 (09:02 -0700)]
altoslib: Fix idle monitor parsing of MMA655x state
There's no ':' after 'MMA655X value' in the output, and the parser
returns 'true' on success, not false.
With this, 'Monitor Idle' now reports correct accelerometer readings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 9 Sep 2014 16:01:42 +0000 (09:01 -0700)]
Tag version 1.4.9.3
This should be the final firmware version for 1.5
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 05:56:25 +0000 (22:56 -0700)]
altosui: Include EasyMega firmware in fat release
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 7 Sep 2014 05:42:47 +0000 (23:42 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Sun, 7 Sep 2014 05:28:13 +0000 (22:28 -0700)]
doc: Update for version 1.5 release
Add stuff about EasyMega and telemetry rate configuration. Update
screen shots as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 03:44:30 +0000 (20:44 -0700)]
altos: Scale packet master receive delay by baud rate
Increase the time we wait for return packets based on the remote
protocol baud rate.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 03:43:32 +0000 (20:43 -0700)]
altoslib: Increase timeouts when using low baud rate remote protocol
When using 2400 or 9600 baud remote link rates, we need to increase
the packet timeout from 500ms to much longer values to avoid annoying
the user with timeout warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 03:41:58 +0000 (20:41 -0700)]
altoslib: Update local callsign/baud rate when using remote protocol
We've had code to synchronously update the local and remote radio
frequencies when doing configuration over the remote link. This patch
adds the same code when changing the call sign and baud rate.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 03:39:37 +0000 (20:39 -0700)]
altos: Reduce deviation at 2400/9600 baud
There's no reason to use 20.5kHz deviation at 2400 and 9600 baud, and
if we get a better receiver, we'll want to use narrower deviation to
have less bandwidth sucking noise into the radio. The new values are
(nominally) 5.125kHz deviation for 9600 baud and 1.5kHz deviation for
2400 baud.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 6 Sep 2014 19:41:36 +0000 (13:41 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Conflicts:
ao-bringup/turnon_telemega
Bdale Garbee [Sat, 6 Sep 2014 19:40:59 +0000 (13:40 -0600)]
tweaking test scripts
Keith Packard [Sat, 6 Sep 2014 07:39:41 +0000 (00:39 -0700)]
altosdroid: Mark completed items as 'done'
Frequency display
Re-load data on restart
Auto re-connect to TBT at correct freq
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Sep 2014 07:14:26 +0000 (00:14 -0700)]
altosdroid: Add imperial unit support
Provides a menu entry to switch units, changes all value displays to
use the AltosLib units conversion code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Sep 2014 06:10:07 +0000 (23:10 -0700)]
altosdroid: Update tab contents before switching
Make sure the new tab contents are updated before switching tabs so
that the user doesn't see old stuff.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Sep 2014 05:06:21 +0000 (22:06 -0700)]
altosdroid: Ignore TelemetryService messages after service shutdown
Messages may get delivered after the service has been shut down;
ignore those.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Sep 2014 18:28:40 +0000 (11:28 -0700)]
altosdroid: add new TelemetryState.java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Sep 2014 05:59:09 +0000 (22:59 -0700)]
altosui: Don't mark altimeter dirty when opening pyro panel
Skip setting the UI dirty when filling in the pyro firing time value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Sep 2014 05:58:22 +0000 (22:58 -0700)]
altos: Allow negative values for pyro configuration data
All of the integer pyro configuration parameters may be negative, so
parse that correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Sep 2014 05:32:49 +0000 (22:32 -0700)]
altosdroid: Use single object to pass data to UI
Instead of having separate messages for each piece of telemetry state,
package the whole mess up in one object and send it for any
change. This simplifies tracking within the UI by avoiding corner
cases during reconnect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Sep 2014 05:12:15 +0000 (22:12 -0700)]
altos/telefire: Add firing length to manual pad command
This adds an optional length of time (in 1/10s of a second) to the
ao_pad_manual function to enable testing of igniters without needing
to use TeleLCO.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 1 Sep 2014 23:25:00 +0000 (18:25 -0500)]
altosui: Fix 'pad' screen for TeleGPS
Don't report pad position for TeleGPS
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 1 Sep 2014 23:23:42 +0000 (18:23 -0500)]
altoslib: Catch a couple null pointers in AltosConfigTD
When messing with TD, I hit a couple of paths that could try to
dereference null pointers. Check for those.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 1 Sep 2014 23:21:49 +0000 (18:21 -0500)]
altoslib: Ignore extra AO_LOG_FLIGHT records from TeleGPS
TeleGPS was inserting a spurious AO_LOG_FLIGHT record each time it
turned on, which confused altoslib quite a bit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 1 Sep 2014 23:12:29 +0000 (18:12 -0500)]
altos: Don't add AO_LOG_FLIGHT to existing GPS logs
When appending to a TeleGPS log, don't stick another flight value into
the log. That just confuses the ground station software.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 31 Aug 2014 05:28:15 +0000 (00:28 -0500)]
altosdroid: reload previous log file at connect time
Use the saved logfile to re-load the previous state at startup time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 31 Aug 2014 05:27:54 +0000 (00:27 -0500)]
altosdroid: Add missing preferences backend file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 31 Aug 2014 05:11:28 +0000 (00:11 -0500)]
altoslib: create logfiles preference object. check link in existing_data
The logfiles preference hash wasn't getting created, resulting in
crashes.
When there was no link, don't try to load existing data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 31 Aug 2014 05:08:33 +0000 (00:08 -0500)]
altosdroid: Add quit. Restart. Show freq in title.
Add a quit button to menu.
When restarting, reconnect to previous device.
When connecting, set the freq/rate to previous values.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 30 Aug 2014 03:33:36 +0000 (22:33 -0500)]
altosdroid: fixup fetching active device address
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 30 Aug 2014 03:08:43 +0000 (22:08 -0500)]
altoslib: TeleMega telemetry pyro voltages are uint8
Using int8 means that voltages over about 6V are reported incorrectly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 Aug 2014 20:22:43 +0000 (15:22 -0500)]
altosdroid: start restoring from log data on startup
Remember which flight was last being received and reload that file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 Aug 2014 20:12:38 +0000 (15:12 -0500)]
altos: Make sure pyro remains valid during delay
Keep checking pyro status while waiting for delay to expire to make
sure nothing changes. Disable pyro channel if something does.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 Aug 2014 02:52:30 +0000 (19:52 -0700)]
ao-bringup: Test EasyMega boards
Keith Packard [Mon, 18 Aug 2014 17:57:26 +0000 (10:57 -0700)]
ao-bringup: Use ao-cal-accel instead of cal-accel in turnon scripts
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 17:53:04 +0000 (10:53 -0700)]
Add ao-tools/ao-cal-accel
This C version may be more reliable than the nickle version
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 18 Aug 2014 17:25:32 +0000 (11:25 -0600)]
turn echo back on after accel cal in turnon_telemetrum so rest is easier
Keith Packard [Mon, 18 Aug 2014 04:03:12 +0000 (21:03 -0700)]
altos: Add telerepeat-v1.0
This uses TeleBT hardware to provide a telemetry repeater, receiving
packets on one frequency and re-transmitting them on another.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 26 Jun 2014 23:29:37 +0000 (16:29 -0700)]
altosui: Make Windows java test "smarter"
Or at least have it try more options, and then finally ask the user
before downloading and installing java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:59:45 +0000 (20:59 -0700)]
telegps-v1.0: Provide one log and append to it
Instead of creating per-flight logs, create a single log and append
data to it each time TeleGPS is powered on. This avoids potentially
running out of log space just because the device is powered off/on.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:57:16 +0000 (20:57 -0700)]
cc1111: Wait for internal flash write to complete
This ensures that we don't try to start another write too soon.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:56:22 +0000 (20:56 -0700)]
Use -ldl when testing whether -m32 and -m64 builds work
We only need -ldl, and not -lbluetooth now that libaltos uses dlopen
on the bluetooth library
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:55:34 +0000 (20:55 -0700)]
ao-tools/ao-send-telem: Support sending TM v2 and Tm v2 telemetry
Add state tracking so the telemetry sending code works.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:54:44 +0000 (20:54 -0700)]
altoslib: Remove some debug printfs
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:53:31 +0000 (20:53 -0700)]
altoslib: Improve performance of AltosLib.hexbytes
On an android device, this function was spending quite a bit of time
calling hexbyte. Open code the conversion to improve performance.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:51:36 +0000 (20:51 -0700)]
altoslib: Close serial port when AltosFlash fails to detect a target
AltosDebug.check_connection raises an exception when the link fails,
but the AltosFlash constructor didn't close the serial port in this
case, causing the serial port to appear to be busy.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:50:38 +0000 (20:50 -0700)]
altoslib: Handle link timeout in AltosDebug.read_memory
link.get_reply returns null on a link error; don't crash in
read_memory when this happens.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:49:27 +0000 (20:49 -0700)]
altoslib: Parse 'Log fixed:' configuration value
TeleGPS holds a single flight record and constantly appends data to it
instead of having separate flight records on the board. It reports
'Log fixed: 1' to let AltosLib know that the size of the per-flight
log is not configurable.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:48:23 +0000 (20:48 -0700)]
altosdroid: Skip updating hidden UI elements
Instead of updating everything in the UI, only update the visible UI
elements to save a bunch of computation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 Aug 2014 03:46:48 +0000 (20:46 -0700)]
altosdroid: Add telemetry rate support
Provides a menu to select the receiver telemetry bit rate
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Aug 2014 02:03:29 +0000 (19:03 -0700)]
altos: Report additional pyro channels via beeper
Send a beep for each additional pyro channel, low for no igniter, mid
for igniter. Does not change the reporting for the apogee/main channels.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 22 Jul 2014 21:18:06 +0000 (14:18 -0700)]
altos: Document which TeleFire alarm pins are which
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 20 Jul 2014 05:35:30 +0000 (22:35 -0700)]
altos: Have MicroKite just start recording at startup
This avoids having MicroKite try to detect boost and has it just start
recording data immediately.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 15 Aug 2014 00:16:14 +0000 (18:16 -0600)]
change easymega from v0.1 to v1.0, tweak to build on master, add to Makefile
Bdale Garbee [Thu, 14 Aug 2014 23:08:36 +0000 (17:08 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Thu, 17 Jul 2014 00:13:25 +0000 (17:13 -0700)]
altoslib: Handle TeleGPS files for KML export
TeleGPS files had state values that couldn't be converted to colors,
which resulted in a truncated file that wasn't much use for anything.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 16 Jul 2014 05:15:50 +0000 (23:15 -0600)]
update turnon tools
Keith Packard [Tue, 15 Jul 2014 07:44:14 +0000 (00:44 -0700)]
linux-fat: Fix up fat linux install icons, mime types and .desktop files
use the standard xdg utilities to install mime type and .desktop
files. The standard xdg icon installer doesn't handle svg icons, so we
have to do those manually.
With this patch, xfce, gnome3 and kde4 all place the applications in
user-visible menus, display correct file icons and launch correct
applications for our file types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 14 Jul 2014 09:32:03 +0000 (02:32 -0700)]
altosuilib: Fix minor scan UI nits
Wasn't computing geometry correctly and overlapped the 2400 baud entry
with the list of scan results.
Was not saving the telemetry rate/telemetry style when switching to
monitor mode, which caused the new monitor to come up with the wrong values.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 14 Jul 2014 07:46:41 +0000 (00:46 -0700)]
Set version to 1.4.9.2
Keith Packard [Mon, 14 Jul 2014 07:45:13 +0000 (00:45 -0700)]
altoslib: Parse eeprom 'altitude-32' fields
This lets us tell if the altimeter supports 32-bit GPS altitudes in
the eeprom log.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 14 Jul 2014 03:44:39 +0000 (20:44 -0700)]
altos/test: Build TeleMetrumV2 flight test variant
Parses TeleMetrumV2 eeprom files and runs the TeleMetrumV2 flight code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 14 Jul 2014 03:43:27 +0000 (20:43 -0700)]
altos: Make ao_gps_print deal with telem containing 32-bit altitude values
ao_gps_print is used with new telem packets from a few places; use
AO_TELEMETRY_LOCATION_ALTITUDE when necessary.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 14 Jul 2014 03:42:41 +0000 (20:42 -0700)]
altos: Interrupt radio receive when changing data rate
This aborts any pending radio receive when changing the data rate so
that the radio can be reprogrammed to receive at the correct rate.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 14 Jul 2014 03:41:36 +0000 (20:41 -0700)]
ao-tools: Add a few GPS telem/eeprom constants
These make it possible to encode/decode GPS data from telemetry and
eeprom files
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 14 Jul 2014 03:40:40 +0000 (20:40 -0700)]
ao-tools: Provide altitude to temperature conversion function
This takes altitude and computes the 'normal' temperature for
that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 13 Jul 2014 18:06:29 +0000 (11:06 -0700)]
ao-tools: Add TMv2 and Tgps log formats to cc.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 13 Jul 2014 06:52:05 +0000 (23:52 -0700)]
altos/telefire,telelco: Add HAS_RADIO_RATE to launch system software
This lets us set the rate to a lower value to improve range. 9600 baud
works great; 2400 baud makes the initial search take a long time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 04:27:30 +0000 (21:27 -0700)]
telegps: Missing function in TeleGPSConfigUI
set_altitude_32 was added to the abstract class but not here.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 04:13:49 +0000 (21:13 -0700)]
libaltos: typo in libaltos broke the build
When converting this to use dlopen, I mis-typed the name hci_read_remote_name
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 01:43:31 +0000 (18:43 -0700)]
altosui: Don't show bluetooth UI bits on mac/windows
This just confuses people into thinking that bluetooth is supported on
those machines.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 01:42:37 +0000 (18:42 -0700)]
libaltos: Bind to libbluetooth at runtime on demand
This lets us reliably start and run without libbluetooth present.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 00:27:43 +0000 (17:27 -0700)]
altoslib: Extend telemetry heights from 16 to 32 bits
Uses the GPS data and/or previous kalman data to compute the upper 16
bits of the truncated telemetry altitude value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 00:26:19 +0000 (17:26 -0700)]
altosui: Fix the 'Graph' button on the landed tab
It hasn't been getting enabled since the state tabs were rewritten.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 00:18:38 +0000 (17:18 -0700)]
altos: Use 32-bits for flight state data (alt/speed/accel)
Stores 32-bits for all of the flight parameters. Uses 64-bit
intermediates for kalman computation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 00:15:09 +0000 (17:15 -0700)]
altos: Record pdop value in TeleMetrumV2 log
There's only one byte free, so we'll record the pdop value
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 00:13:09 +0000 (17:13 -0700)]
altos: Scale DOP values by 10 in GPS drivers
sky traq was scaling by 5, ublox was scaling by 100.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 00:10:49 +0000 (17:10 -0700)]
altoslib: Handle wide GPS altitude values in eeprom and telemetry
Detect when the wider data is present and handle it correctly
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 11 Jul 2014 00:07:48 +0000 (17:07 -0700)]
altos: Extend GPS altitudes to at least 24 bits everywhere
Telemetry gets a special 'mode' flag indicating that 24-bit data is
present; log files get new data and log readers are expected to detect
that via the firmware version number.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 10 Jul 2014 23:19:52 +0000 (16:19 -0700)]
altosuilib: Allow for unitless axes in graphs
DOP values have no units.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 10 Jul 2014 23:19:34 +0000 (16:19 -0700)]
altosuilib: Add GPS DOP values to info table
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 10 Jul 2014 23:19:17 +0000 (16:19 -0700)]
altosuilib: Add GPS DOP values to graph
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 10 Jul 2014 23:17:56 +0000 (16:17 -0700)]
altoslib: Ensure CSV output is consistent
Scan entire flight to figure out which columns to include before
outputing header or data. Limit data output to values which are valid.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 10 Jul 2014 23:15:52 +0000 (16:15 -0700)]
altoslib: Clean up GPS DOP support in AltosState
Parse out hdop/pdop/vdop from telem and eeprom. Deal with legacy
eeprom files that have dop/100 instead of dop/10 values.
Clear state DOP values to MISSING at startup
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 10 Jul 2014 07:26:55 +0000 (00:26 -0700)]
micropeak/altosui/telegps: Fix icon file names
The icon file names are now structured to have an organization name
and application name component. This should avoid collisions with
other packages when the icon files are installed in a shared
directory, as on Linux. Within the Java .jar file, the new names need
to be correctly referenced or we won't find them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 9 Jul 2014 06:47:09 +0000 (23:47 -0700)]
altos/telemini-v2.0: Enable beep config and radio rate config
use the smaller pa to altitude table to make room for the new code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 9 Jul 2014 06:46:24 +0000 (23:46 -0700)]
altos: Add smaller pa to altitude table for TeleMini
TeleMini doesn't have space for the larger table, and the smaller one
isn't that much less accurate at lower altitudes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 9 Jul 2014 06:45:10 +0000 (23:45 -0700)]
altos/telemini-v2.0: Add memory decorations to new telemetry variables
This lets TeleMini-v2.0 compile.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 9 Jul 2014 06:43:31 +0000 (23:43 -0700)]
altosui: Hide inactive altimeter configuration entries
Instead of disabling them, just hide them so that entries that do not
apply to a particular device won't get shown at all.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 7 Jul 2014 03:10:21 +0000 (20:10 -0700)]
Bump version to 1.4.9.1 -- on the way to 1.5
Keith Packard [Sun, 6 Jul 2014 19:35:13 +0000 (12:35 -0700)]
Add support for the "kite" micropeak variant
This uses a 100m 'launch detect' altitude and logs data every 19.2s
instead of every .192s.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 5 Jul 2014 07:16:57 +0000 (00:16 -0700)]
telegps: Support variable telemetry rate
Add combo box to monitoring window and device configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 5 Jul 2014 06:41:16 +0000 (23:41 -0700)]
altosui: Support telemetry data rates
Add combo box to flight UI and flight hardware configuration UIs
Add telemetry rate to the TD/TBT config dialog
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 5 Jul 2014 06:57:42 +0000 (23:57 -0700)]
altosuilib: Add telemetry rate to Scan UI
Let the user scan for multiple data rates as well as telemetry formats
and frequencies
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 Jul 2014 05:48:13 +0000 (22:48 -0700)]
altoslib: Support multiple telemetry rates
Altos now supports 2400 and 9600 baud in addition to the classic 38400
baud rate. Add support to altoslib for these as well
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 5 Jul 2014 07:04:06 +0000 (00:04 -0700)]
altos: Rework packet receive for cc1120
Instead of blocking on PQT, just set up the receiver to start going
and when the first bit interrupt comes in, grab the SPI bus if
possible and configure it for reception. This improves sensitivity in
the radio by a significant amount while making the code conceptually a
bit nicer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 Jul 2014 05:34:48 +0000 (22:34 -0700)]
altos: Add telemetry rate support to CC1120 driver
This supports the new 2400 and 9600 baud rates
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 5 Jul 2014 06:42:30 +0000 (23:42 -0700)]
altos: Packet reception tuning for cc1120 driver
This adjusts the cc1120 receive parameters to increase sensitivity at
the expense of reporting many more invalid packets to the UI.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 Jul 2014 05:41:20 +0000 (22:41 -0700)]
altos: Add 2400 and 9600 baud telemetry support to cc115l driver
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 Jul 2014 05:31:59 +0000 (22:31 -0700)]
altos/cc1111: Add 2400 and 9600 baud telemetry rate support
Signed-off-by: Keith Packard <keithp@keithp.com>