]>
git.gag.com Git - hw/altusmetrum/log
Keith Packard [Fri, 30 Jan 2015 05:38:58 +0000 (06:38 +0100)]
remove bogus GND pin from STM32L151-48 symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:37:43 +0000 (06:37 +0100)]
Add 5-hole 50mil pin header footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:37:16 +0000 (06:37 +0100)]
Add ufqfpn-28 package (4x4 mm)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:36:06 +0000 (06:36 +0100)]
Add DIP16 package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:35:04 +0000 (06:35 +0100)]
Add MicroChip MCP601 op-amp datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:34:35 +0000 (06:34 +0100)]
Add Liteon 7-segment LED datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:34:05 +0000 (06:34 +0100)]
Add AP3012 boost regulator data sheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 Jan 2015 05:33:48 +0000 (06:33 +0100)]
Add ATtiny 25/45/85 datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 24 Jan 2015 04:25:59 +0000 (20:25 -0800)]
Add 7-segment LED display symbol (uses DIP14 footprint)
Bdale Garbee [Mon, 26 Jan 2015 05:27:51 +0000 (22:27 -0700)]
footprints for 1802 project, symbols for greenhouse board
Bdale Garbee [Sat, 24 Jan 2015 21:00:45 +0000 (14:00 -0700)]
multi-digit 7-segment LED displays
Bdale Garbee [Sat, 24 Jan 2015 19:33:56 +0000 (12:33 -0700)]
try to fix the hex keypad symbol, rename footprint
Bdale Garbee [Sat, 24 Jan 2015 18:25:14 +0000 (11:25 -0700)]
another broken symbol thanks to a trailing blank line .. argh
Bdale Garbee [Sat, 24 Jan 2015 18:05:52 +0000 (11:05 -0700)]
wow, gschem is picky about trailing blank lines in symbols .. who knew?
Bdale Garbee [Sat, 24 Jan 2015 18:03:23 +0000 (11:03 -0700)]
add datasheet attributes to recent symbols
Bdale Garbee [Sat, 24 Jan 2015 17:59:40 +0000 (10:59 -0700)]
more parts for 1802 project
Bdale Garbee [Sun, 18 Jan 2015 01:14:43 +0000 (14:14 +1300)]
sram, bus transceiver for ELF project
Bdale Garbee [Wed, 14 Jan 2015 01:37:20 +0000 (14:37 +1300)]
flesh out hex keypad footprint approximation, put 3 Mhz crystal datasheet back
Bdale Garbee [Wed, 14 Jan 2015 01:01:11 +0000 (14:01 +1300)]
need 6 Mhz rock for 3 Mhz CPU clock
Bdale Garbee [Tue, 13 Jan 2015 23:04:12 +0000 (12:04 +1300)]
working on 1802 system
Bdale Garbee [Tue, 13 Jan 2015 10:32:21 +0000 (23:32 +1300)]
update copyright year in title blocks
Keith Packard [Sun, 28 Dec 2014 23:10:19 +0000 (15:10 -0800)]
Replace the static part label with the value field instead
This lets you easily see and edit it in the schematic.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 28 Dec 2014 08:50:52 +0000 (01:50 -0700)]
fix busted pad reference on Rayson footprint
Keith Packard [Wed, 24 Dec 2014 10:50:28 +0000 (02:50 -0800)]
Add symbol for STM32F042 in LQFP package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:49:56 +0000 (02:49 -0800)]
Add symbol for micron N25Q u-pdfn-8 flash part
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:49:32 +0000 (02:49 -0800)]
Add symbol for microchip mcp601 op-amp
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:48:56 +0000 (02:48 -0800)]
Add schematic symbol for diodes inc AP3015 boost regulator
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:47:57 +0000 (02:47 -0800)]
Add datasheet for diodes inc DFSL130
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:46:04 +0000 (02:46 -0800)]
Remove bogus CC1175 label from CC1175 symbol
We want this as the value, not a random text string
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:45:15 +0000 (02:45 -0800)]
Add footprints for PCB-based USB connector and u-pdfn package from micron
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:44:37 +0000 (02:44 -0800)]
Add LQFP-32 footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 10:43:11 +0000 (02:43 -0800)]
Move STM32F042 docs to sub directory
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 04:25:33 +0000 (20:25 -0800)]
Add datasheet for Diodes Inc AP3015 boost regulator
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Dec 2014 04:23:18 +0000 (20:23 -0800)]
Add docs for STM32F042 parts
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 14 Nov 2014 17:57:26 +0000 (09:57 -0800)]
Add symbol for TI DRV8838
Same as the DRV8837, except for different input definitions
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 14 Nov 2014 17:56:46 +0000 (09:56 -0800)]
Replace TI DRV8837 datasheet with DRV883x
This datasheet covers both the DRV8837 and DRV8838, which differ only
in the input controls
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 17:57:47 +0000 (09:57 -0800)]
Move origin to center of the board edge
This makes locating the part along the edge of the board easier
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 17:57:28 +0000 (09:57 -0800)]
Add Nordic nRF8001 symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 16:10:16 +0000 (08:10 -0800)]
Add datasheet for Nordic nRF8001 BTLE chip
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 00:17:25 +0000 (16:17 -0800)]
Add on-board USB type A male connector
This provides a footprint for a PCB-based USB Type A connector, which
can be used without a shell. Note that this does want to sit on a 2mm
board if possible, but 1.6mm should work fine in most cases.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Nov 2014 00:16:35 +0000 (16:16 -0800)]
Make QFNs have square pads by default
Cutting stencils with round pads doesn't work, so just make the pads
square. In theory, this could cause soldering issues, but we've never
seen any trouble.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 27 Oct 2014 02:56:57 +0000 (19:56 -0700)]
Add packages and symbols for TeleFire
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 27 Oct 2014 02:05:14 +0000 (19:05 -0700)]
Add symbols for TeleLCO
STM32L152, MIC5235, rotary switch, spst switch and lcd digit from lumex
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 27 Oct 2014 02:03:57 +0000 (19:03 -0700)]
Add a bunch of TI datasheets
cc1101
cc1120-user-guide
cc1175
74hc165
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 27 Oct 2014 01:49:03 +0000 (18:49 -0700)]
Add CC1200 and CC1175 symbols
Keith Packard [Sun, 5 Oct 2014 02:31:08 +0000 (19:31 -0700)]
Add docs for cc1200
Bdale Garbee [Mon, 18 Aug 2014 00:58:46 +0000 (18:58 -0600)]
data sheet for the cc1175
Bdale Garbee [Mon, 18 Aug 2014 00:56:45 +0000 (18:56 -0600)]
cc1200 data sheet and 70cm ref design
Bdale Garbee [Thu, 14 Aug 2014 03:36:26 +0000 (21:36 -0600)]
screw terminals Bdale likes for ebay bulkheads, 3.5mm spacing
Bdale Garbee [Mon, 14 Jul 2014 20:38:20 +0000 (14:38 -0600)]
more data sheets
Bdale Garbee [Mon, 14 Jul 2014 20:37:29 +0000 (14:37 -0600)]
add footprint generator for audio amp
Bdale Garbee [Mon, 14 Jul 2014 20:34:08 +0000 (14:34 -0600)]
stuff for usbclassd
Bdale Garbee [Sun, 6 Jul 2014 03:12:52 +0000 (21:12 -0600)]
symbols for parts used on USB class-D audio amplifier project
Bdale Garbee [Tue, 1 Jul 2014 23:20:37 +0000 (17:20 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Tue, 1 Jul 2014 23:20:14 +0000 (17:20 -0600)]
move amplifier data sheet into audito subdir
Keith Packard [Tue, 1 Jul 2014 23:10:23 +0000 (16:10 -0700)]
Update nx3215sa xtal footprint to use suggested land pattern
The package pads are 0.75 x 1.3 mm, but the data sheet suggests a pad
size of 1.0 x 1.8mm to ensure sufficient solder around, I assume.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 29 Jun 2014 16:02:30 +0000 (10:02 -0600)]
audio amplifier chip Bdale is considering for whole house audio system
Bdale Garbee [Wed, 18 Jun 2014 02:57:11 +0000 (20:57 -0600)]
datasheet for the new fox crystal
Bdale Garbee [Wed, 18 Jun 2014 02:56:08 +0000 (20:56 -0600)]
footprint for new fox crystal
Bdale Garbee [Sun, 27 Apr 2014 00:39:49 +0000 (18:39 -0600)]
Micrel high-side switches
Bdale Garbee [Sun, 27 Apr 2014 00:29:53 +0000 (18:29 -0600)]
new parts
Bdale Garbee [Tue, 8 Apr 2014 16:19:19 +0000 (10:19 -0600)]
baro sensor used in early TeleMetrum and TeleMini boards
Bdale Garbee [Tue, 8 Apr 2014 16:19:01 +0000 (10:19 -0600)]
accel used in early TeleMetrum boards
Bdale Garbee [Thu, 27 Mar 2014 17:47:17 +0000 (10:47 -0700)]
config file for pcb to only pull footprints from our library
Bdale Garbee [Tue, 18 Mar 2014 16:50:26 +0000 (10:50 -0600)]
fix clearance issues when doing top layer ground floods
Bdale Garbee [Tue, 18 Mar 2014 06:07:24 +0000 (00:07 -0600)]
fix problems with MicroMaTch footprints exposed by freedfm.com
Bdale Garbee [Fri, 7 Mar 2014 01:29:17 +0000 (18:29 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 7 Mar 2014 01:28:51 +0000 (18:28 -0700)]
update usbAmale footprint to support multiple vendors
Bdale Garbee [Thu, 6 Mar 2014 22:49:49 +0000 (15:49 -0700)]
tweak offboard symbol to work better
Bdale Garbee [Thu, 6 Mar 2014 19:09:44 +0000 (12:09 -0700)]
4ucon USB A connector .. 0.123/ea at q1000
Bdale Garbee [Thu, 6 Mar 2014 18:46:15 +0000 (11:46 -0700)]
baseline usb A connector for usbtrng
Bdale Garbee [Thu, 6 Mar 2014 18:45:10 +0000 (11:45 -0700)]
possibly cheaper USB a connector for usbtrng
Bdale Garbee [Thu, 6 Mar 2014 18:15:31 +0000 (11:15 -0700)]
add a symbol for offboard parts .. launchpad bug #
1288906 applies
Bdale Garbee [Thu, 6 Mar 2014 17:16:54 +0000 (10:16 -0700)]
possible enclosure for usbtrng
Keith Packard [Sat, 1 Mar 2014 04:41:31 +0000 (20:41 -0800)]
Add LPC11U14 BIOS disassemble and cortex m0 manual
Bdale Garbee [Fri, 28 Feb 2014 18:01:06 +0000 (11:01 -0700)]
update copyright year
Bdale Garbee [Mon, 24 Feb 2014 01:15:08 +0000 (18:15 -0700)]
data sheets and footprints for LipoCharger and USBTRNG
Bdale Garbee [Sat, 22 Feb 2014 07:30:55 +0000 (00:30 -0700)]
original A and B USB only have 4 pins .. needs a different symbol
Bdale Garbee [Sat, 22 Feb 2014 07:26:34 +0000 (00:26 -0700)]
add footprint for a USB A connector
Bdale Garbee [Sun, 16 Feb 2014 23:01:39 +0000 (16:01 -0700)]
switch we use on LipoCharger
Bdale Garbee [Sun, 16 Feb 2014 21:52:03 +0000 (14:52 -0700)]
add a 6-pin version of the picodebug to allow including serial pins
Bdale Garbee [Sun, 16 Feb 2014 20:16:26 +0000 (13:16 -0700)]
add a single-sided footprint for wire antennas launching from PCB end
Keith Packard [Sun, 16 Feb 2014 19:22:14 +0000 (11:22 -0800)]
Add package for a soldered-in-place lipo
This provides two solder pads 4mm square to attach a lipo battery to
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Feb 2014 19:01:15 +0000 (11:01 -0800)]
Package PWSON-N8 was flipped
oops. pins on the wrong sides.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Feb 2014 18:58:57 +0000 (10:58 -0800)]
Add symbol and datasheet for skyworks AAT3681A
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 15 Feb 2014 23:45:26 +0000 (16:45 -0700)]
symbol for TI CC1110, which is not pinout-compatible with the CC1111!
Bdale Garbee [Thu, 30 Jan 2014 08:36:17 +0000 (01:36 -0700)]
add datasheet for the TeleDongle version of the Hammond 1551 box
Bdale Garbee [Mon, 13 Jan 2014 03:53:54 +0000 (20:53 -0700)]
update copyright dates in schematic title blocks to 2014
Bdale Garbee [Sun, 12 Jan 2014 22:39:27 +0000 (15:39 -0700)]
big resistor footprint for test fixture
Bdale Garbee [Sun, 12 Jan 2014 18:38:56 +0000 (11:38 -0700)]
more symbols
Bdale Garbee [Thu, 26 Dec 2013 08:18:56 +0000 (01:18 -0700)]
fix central vias for use on multi-layer boards
Bdale Garbee [Thu, 26 Dec 2013 00:48:40 +0000 (17:48 -0700)]
symbols from fox1ihu needed for usbrelay board
Bdale Garbee [Thu, 19 Dec 2013 22:24:59 +0000 (15:24 -0700)]
build new relay footprints
Bdale Garbee [Thu, 19 Dec 2013 22:24:10 +0000 (15:24 -0700)]
cleaned up picodebug footprint
Bdale Garbee [Thu, 19 Dec 2013 22:23:26 +0000 (15:23 -0700)]
as used on fox1ihu v2
Bdale Garbee [Thu, 19 Dec 2013 20:19:47 +0000 (13:19 -0700)]
Omron relay datasheet
Bdale Garbee [Thu, 19 Dec 2013 20:16:39 +0000 (13:16 -0700)]
Omron RF relays in both normal and "E" footprints
Bdale Garbee [Sun, 15 Dec 2013 07:28:46 +0000 (00:28 -0700)]
saw filter data sheet, symbol for AMSAT's chosen LDO
Bdale Garbee [Sun, 15 Dec 2013 01:38:43 +0000 (18:38 -0700)]
Omron G6Z-1FE RF relay
Bdale Garbee [Sun, 24 Nov 2013 23:20:53 +0000 (16:20 -0700)]
create a 4-pin debug connector that's a
530470410 without silk - picodebug