Bdale Garbee [Thu, 21 Jun 2018 19:13:23 +0000 (13:13 -0600)]
stop pretending we're using FreeCAD to generate g-code
Bdale Garbee [Fri, 15 Jun 2018 01:55:52 +0000 (19:55 -0600)]
telelco panel cover g-code generated and successfully used to cut first panel
Bdale Garbee [Fri, 15 Jun 2018 01:55:17 +0000 (19:55 -0600)]
footprint for suppression diode used in AMSAT LTI design
Bdale Garbee [Mon, 11 Jun 2018 10:44:25 +0000 (12:44 +0200)]
Omnetics connector for Fox LTI
Bdale Garbee [Wed, 30 May 2018 20:43:13 +0000 (14:43 -0600)]
thin panel around encoder and power switch, fix pcb screw holes
Bdale Garbee [Wed, 30 May 2018 17:57:34 +0000 (11:57 -0600)]
make note of changes needed in future prints of LCO panel
Bdale Garbee [Wed, 30 May 2018 17:55:02 +0000 (11:55 -0600)]
ignore pdf output from lowriter for TeleLCO panel
Bdale Garbee [Wed, 30 May 2018 17:54:11 +0000 (11:54 -0600)]
label for TeleLCO panel
Bdale Garbee [Tue, 29 May 2018 19:25:03 +0000 (13:25 -0600)]
document what the ledtower base file is for
Bdale Garbee [Tue, 29 May 2018 15:15:26 +0000 (09:15 -0600)]
new 4ucon micro USB part with posts
Bdale Garbee [Tue, 29 May 2018 07:26:05 +0000 (01:26 -0600)]
cut cavity from back side to get LCDs closer to surface
Bdale Garbee [Tue, 29 May 2018 06:25:40 +0000 (00:25 -0600)]
update panel to resolve SMA vs drag mode switch conflict
Bdale Garbee [Sun, 27 May 2018 21:06:27 +0000 (15:06 -0600)]
data sheets for new parts needed on Fox LTI FM
Bdale Garbee [Sun, 27 May 2018 19:57:00 +0000 (13:57 -0600)]
more mechanical output files to ignore
Bdale Garbee [Sun, 27 May 2018 19:54:44 +0000 (13:54 -0600)]
photo showing correct orientation of Power Pole connectors per ARES
Bdale Garbee [Sat, 26 May 2018 18:47:13 +0000 (12:47 -0600)]
add led tower holes and position rocker switches on telefireeight top
Bdale Garbee [Fri, 25 May 2018 20:10:37 +0000 (14:10 -0600)]
move LED tower wire hole to correct side, notch for bumps on ammo box
Bdale Garbee [Fri, 25 May 2018 19:55:54 +0000 (13:55 -0600)]
add drawing for plexiglass panel cover, adjust toggle switch lands
Bdale Garbee [Fri, 25 May 2018 18:25:19 +0000 (12:25 -0600)]
optimize length of toggle switch anti-rotation ribs on telelco panel
Bdale Garbee [Fri, 25 May 2018 17:56:42 +0000 (11:56 -0600)]
correct position of rib next to power switch on telelco panel
Bdale Garbee [Thu, 24 May 2018 23:29:31 +0000 (17:29 -0600)]
base for LED tower warning light on TeleFire boxes, straddles ammo box handle
Bdale Garbee [Wed, 23 May 2018 05:57:58 +0000 (23:57 -0600)]
added toggle switch lands and ribs, third print
Bdale Garbee [Wed, 23 May 2018 05:29:17 +0000 (23:29 -0600)]
snapshot
Bdale Garbee [Mon, 21 May 2018 13:49:43 +0000 (07:49 -0600)]
add datasheets for STM32F413, proposed for use in TeleActive
Bdale Garbee [Mon, 21 May 2018 13:49:03 +0000 (07:49 -0600)]
add more things to ignore in mechancial subtree
Bdale Garbee [Mon, 21 May 2018 13:48:20 +0000 (07:48 -0600)]
various design files from Pelican for the 1170 case used for TeleLCO
Bdale Garbee [Mon, 21 May 2018 13:45:43 +0000 (07:45 -0600)]
datasheet for high-rel 1802
Bdale Garbee [Mon, 21 May 2018 13:43:07 +0000 (07:43 -0600)]
design data for cutting TeleFireEight ammo boxes
Bdale Garbee [Mon, 21 May 2018 13:30:12 +0000 (07:30 -0600)]
connecter used on some of Bdale's personal projects
Bdale Garbee [Mon, 21 May 2018 13:27:43 +0000 (07:27 -0600)]
add script used to generate g-code for cutting TeleBT boxes
Bdale Garbee [Mon, 21 May 2018 13:25:21 +0000 (07:25 -0600)]
add script for generating g-code to cut TeleDongle boxes
Bdale Garbee [Sun, 20 May 2018 01:17:40 +0000 (19:17 -0600)]
1170 panel as per second full print
Bdale Garbee [Wed, 16 May 2018 04:52:03 +0000 (22:52 -0600)]
add Thingiverse links to mechanical Notebook file
Bdale Garbee [Wed, 16 May 2018 04:49:03 +0000 (22:49 -0600)]
set bracket hole diameter for M3 brass insert
Bdale Garbee [Wed, 16 May 2018 04:44:53 +0000 (22:44 -0600)]
angle brackets for mounting panel in TeleLCO
Bdale Garbee [Tue, 15 May 2018 22:47:58 +0000 (16:47 -0600)]
correct STM32L152 part number, add Cree blue LED
Bdale Garbee [Tue, 15 May 2018 00:24:31 +0000 (17:24 -0700)]
added nibs for LED bodies
Bdale Garbee [Mon, 14 May 2018 21:50:17 +0000 (14:50 -0700)]
first cut at panel surface completed
Bdale Garbee [Mon, 14 May 2018 19:49:02 +0000 (12:49 -0700)]
LCD openings and encoder shaft positioned, overall size set
Bdale Garbee [Sun, 13 May 2018 02:55:15 +0000 (19:55 -0700)]
start a mechanical parts tree with the powerpole mount for TeleFire products
Bdale Garbee [Thu, 10 May 2018 23:11:43 +0000 (16:11 -0700)]
add an 8-position standard, high reliability DIP switch for TeleFire
Bdale Garbee [Thu, 10 May 2018 23:11:17 +0000 (16:11 -0700)]
add symbol for an 8-way standard dip switch for use on TeleFire
Bdale Garbee [Thu, 10 May 2018 22:59:50 +0000 (15:59 -0700)]
data sheet for dip switch used on TeleFire boards
Bdale Garbee [Tue, 8 May 2018 19:58:52 +0000 (12:58 -0700)]
add 3mm through-hole LEDs to pref parts list for TeleLCO
Bdale Garbee [Tue, 1 May 2018 21:38:48 +0000 (15:38 -0600)]
data sheet for rotary on/off switch on TeleLCO
Bdale Garbee [Mon, 2 Apr 2018 19:27:34 +0000 (13:27 -0600)]
data sheet for Pelican 1170 case proposed for use with TeleLCO
Bdale Garbee [Fri, 30 Mar 2018 04:02:55 +0000 (22:02 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 30 Mar 2018 04:02:31 +0000 (22:02 -0600)]
move to STM32L152VCT6 on telelco (only user of the L152)
Keith Packard [Thu, 29 Mar 2018 18:11:58 +0000 (11:11 -0700)]
Add cree LED data sheet for blue/green colors
we had the red/yellow one already.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 27 Mar 2018 21:37:36 +0000 (15:37 -0600)]
lose slotdef, slot attribs on syms that don't have slots (telefireeight)
Bdale Garbee [Wed, 21 Mar 2018 16:00:30 +0000 (10:00 -0600)]
data sheet for power switch on TeleLCO
Bdale Garbee [Wed, 21 Mar 2018 15:57:02 +0000 (09:57 -0600)]
data sheet for switches on TeleLCOTwo
Bdale Garbee [Wed, 21 Mar 2018 04:14:23 +0000 (22:14 -0600)]
data sheet for LCD display digits used on TeleLCO
Bdale Garbee [Wed, 21 Mar 2018 03:07:05 +0000 (21:07 -0600)]
data sheet for Grayhill optical encoder we've selected for TeleLCO
Bdale Garbee [Tue, 20 Mar 2018 21:14:26 +0000 (15:14 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Tue, 20 Mar 2018 21:14:03 +0000 (15:14 -0600)]
add an un-copyrighted title-B.sym
Keith Packard [Wed, 14 Mar 2018 06:42:34 +0000 (23:42 -0700)]
Add quick-connect symbol
Keith Packard [Mon, 12 Mar 2018 02:52:14 +0000 (19:52 -0700)]
rename 3568.5c to fuse3568.5c
Makes the footprint name a bit more distinct.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 3 Mar 2018 18:05:14 +0000 (11:05 -0700)]
micro USB is on 16mm reel
Bdale Garbee [Fri, 2 Mar 2018 15:59:16 +0000 (08:59 -0700)]
add ADXL375 to preferred parts db
Bdale Garbee [Sun, 25 Feb 2018 23:10:56 +0000 (16:10 -0700)]
swap power pins on ADXL375 symbol for compatibility with existing schematics
Bdale Garbee [Sun, 25 Feb 2018 23:06:07 +0000 (16:06 -0700)]
schematic symbol and footprint for ADXL375
Bdale Garbee [Sun, 25 Feb 2018 22:16:28 +0000 (15:16 -0700)]
remove ADXL377 data sheet .. 375 with SPI vs analog output better for us
Bdale Garbee [Sun, 25 Feb 2018 22:14:04 +0000 (15:14 -0700)]
updated version of ADXL375 data sheet
Bdale Garbee [Thu, 15 Feb 2018 22:22:35 +0000 (15:22 -0700)]
eliminate duplicate/old entry
Bdale Garbee [Thu, 15 Feb 2018 22:16:37 +0000 (15:16 -0700)]
updated pref parts due to availability for TeleMetrum build
Bdale Garbee [Thu, 15 Feb 2018 19:09:08 +0000 (12:09 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Thu, 15 Feb 2018 19:08:57 +0000 (12:08 -0700)]
typo -- needs to be a tab
Bdale Garbee [Thu, 15 Feb 2018 19:07:05 +0000 (12:07 -0700)]
Mouser is the only one with STM32L151CBU6 stock right now
Bdale Garbee [Mon, 8 Jan 2018 01:30:06 +0000 (22:30 -0300)]
2x26 pin header on 100mil centers for AMSAT LTI project
Bdale Garbee [Sun, 7 Jan 2018 01:22:32 +0000 (22:22 -0300)]
add datasheet for stacking headers to be used on AMSAT LTI card
Bdale Garbee [Mon, 1 Jan 2018 06:31:51 +0000 (23:31 -0700)]
data sheets for u-blox products we might use someday
Keith Packard [Sat, 30 Dec 2017 18:45:57 +0000 (10:45 -0800)]
Add mcp6541ut to preferred parts and datasheets
This is a comparator to replace the tsv521 which is no longer available.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 24 Dec 2017 19:38:20 +0000 (12:38 -0700)]
updated data sheets for interesting GPS chip antennas from Johanson
Bdale Garbee [Tue, 19 Dec 2017 19:05:50 +0000 (12:05 -0700)]
0.075 mm is closer to 3mils than 10, and 10 was clearly too much!
Bdale Garbee [Thu, 30 Nov 2017 05:41:24 +0000 (22:41 -0700)]
make the stencil target work for current pcb-rnd
Bdale Garbee [Sun, 12 Nov 2017 16:21:45 +0000 (09:21 -0700)]
more work on pcb-rnd makefile
Bdale Garbee [Fri, 10 Nov 2017 22:15:19 +0000 (15:15 -0700)]
eliminate MPU9250 footprint in favor of ufqfpn24
Keith Packard [Fri, 10 Nov 2017 22:11:58 +0000 (14:11 -0800)]
Have ufqfpn24 pads extend 0.4mm outside of package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 22:10:22 +0000 (14:10 -0800)]
Remove silk rectangle around ufqfpn24 package
This was just for validation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 21:40:23 +0000 (13:40 -0800)]
Add ufqfpn24 footprint (for MPU9250)
This is a 3mmx3mm 24-pin package with 0.4mm spacing and no central
pad. The corner pads are beveled by overlapping four pads to preserve
process spacing between them. The resulting spacing is about 8.4 mils
(0.21mm).
Solder mask is set to 0.05mm as specified in the MPU9250 docs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 20:42:10 +0000 (12:42 -0800)]
Add a couple of alternate USBmicroB connectors
This makes it slightly easier to generate parts lists and track what
we used to build boards by just changing the value in the schematic.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 18 Oct 2017 15:17:46 +0000 (08:17 -0700)]
Ship FAB file to AC as $(PROJECT).fab
The assembly folks require this file
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 10 Nov 2017 17:31:55 +0000 (10:31 -0700)]
put the right part name in footprint
Bdale Garbee [Fri, 10 Nov 2017 17:23:32 +0000 (10:23 -0700)]
fix MPU-9250 footprint
Bdale Garbee [Fri, 10 Nov 2017 16:59:51 +0000 (09:59 -0700)]
version 1.1 of MPU-9250 datasheet from Invensense
Bdale Garbee [Tue, 31 Oct 2017 18:44:35 +0000 (12:44 -0600)]
substitute 40mhz rock with a part that's currently available
Bdale Garbee [Sat, 14 Oct 2017 00:00:48 +0000 (18:00 -0600)]
preferred parts updates in support of TeleMega v3 build
Bdale Garbee [Mon, 11 Sep 2017 21:50:52 +0000 (15:50 -0600)]
fix footprint default in ADS124S0X symbol
Bdale Garbee [Mon, 11 Sep 2017 15:50:03 +0000 (09:50 -0600)]
symbol, footprint, datasheets for ADS124S06 ADC from TI, for TeleFireOne v2
Bdale Garbee [Mon, 11 Sep 2017 14:21:40 +0000 (08:21 -0600)]
create assertionless E-sized title block
Bdale Garbee [Sun, 10 Sep 2017 01:47:13 +0000 (19:47 -0600)]
fix symbol metadata
Bdale Garbee [Sun, 10 Sep 2017 01:46:30 +0000 (19:46 -0600)]
fix symbol metadata
Bdale Garbee [Sun, 10 Sep 2017 01:46:00 +0000 (19:46 -0600)]
add a footprint for the ADS1220 ADC
Bdale Garbee [Sun, 10 Sep 2017 01:13:38 +0000 (19:13 -0600)]
fix pintype warnings on INA125, add a 16-pin 8x2 header footprint
Bdale Garbee [Sun, 10 Sep 2017 01:13:25 +0000 (19:13 -0600)]
basic things are working
Bdale Garbee [Sat, 9 Sep 2017 23:40:37 +0000 (17:40 -0600)]
schematic symbol for 24-bit, 4-input, SPI attached ADC
Bdale Garbee [Sat, 9 Sep 2017 22:56:26 +0000 (16:56 -0600)]
data sheet for external ADC on telefireone
Bdale Garbee [Thu, 10 Aug 2017 03:32:43 +0000 (23:32 -0400)]
can actually get the SOC at Mouser right now
Bdale Garbee [Thu, 10 Aug 2017 03:13:35 +0000 (23:13 -0400)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
projects / hw / altusmetrum / log