2010-11-22 |
Bdale Garbee | reduce size of the gps split ground plane, clean up... |
blob | commitdiff | raw |
2010-11-22 |
Bdale Garbee | pcb updated with accel_ref divider and minus the GPS... |
blob | commitdiff | raw | diff to current |
2010-11-18 |
Bdale Garbee | update to reflect footprint name change |
blob | commitdiff | raw | diff to current |
2010-10-01 |
Bdale Garbee | change from DataFlash to M25P80 for on-board data storage |
blob | commitdiff | raw | diff to current |
2010-08-11 |
Bdale Garbee | redesign reset circuit to completely solve the "cap... |
blob | commitdiff | raw | diff to current |
2010-05-14 |
Bdale Garbee | cap value change reflected in pcb |
blob | commitdiff | raw | diff to current |
2010-05-05 |
Bdale Garbee | remove BuildLog since it contains private information |
blob | commitdiff | raw | diff to current |
2010-03-10 |
Bdale Garbee | replace LDO with TC2185, adding C38 0.1uF bypass cap... quote-v1.0 |
blob | commitdiff | raw | diff to current |
2010-03-07 |
Bdale Garbee | tweak the position of 'main' so it doesn't crowd 'apoge... |
blob | commitdiff | raw | diff to current |
2010-03-07 |
Bdale Garbee | move 'pyro' into the B2 component outline since it... |
blob | commitdiff | raw | diff to current |
2010-03-07 |
Bdale Garbee | move a via and the text to improve 'switch' integrity... |
blob | commitdiff | raw | diff to current |
2010-03-07 |
Bdale Garbee | move 'companion' in silk screen to avoid vias, change... |
blob | commitdiff | raw | diff to current |
2010-01-11 |
Bdale Garbee | change reset cap back from 1uF to 0.001uF, note that... |
blob | commitdiff | raw | diff to current |
2010-01-07 |
Bdale Garbee | two resistor suffixes propagated to pcb file |
blob | commitdiff | raw | diff to current |
2010-01-02 |
Bdale Garbee | attribute cleanups |
blob | commitdiff | raw | diff to current |
2009-12-18 |
Bdale Garbee | fix soldermask clearance on gps patch pin |
blob | commitdiff | raw | diff to current |
2009-12-18 |
Bdale Garbee | update pcb to reflect use of v_charge for GPS vbat |
blob | commitdiff | raw | diff to current |
2009-12-18 |
Bdale Garbee | move to 16mbit dataflash part since nobody has 32mbit... |
blob | commitdiff | raw | diff to current |
2009-12-18 |
Bdale Garbee | more copper and mask tweaking |
blob | commitdiff | raw | diff to current |
2009-12-18 |
Bdale Garbee | fixing soldermask relief issues, etc, identified by... |
blob | commitdiff | raw | diff to current |
2009-12-18 |
Bdale Garbee | add soldermask clearance to index holes on micromatch... |
blob | commitdiff | raw | diff to current |
2009-12-18 |
Bdale Garbee | up annular ring design rule to 7 mils, update vias... |
blob | commitdiff | raw | diff to current |
2009-12-18 |
Bdale Garbee | upgraded geda-gaf to 1.6.0, used gattrib to clean up... |
blob | commitdiff | raw | diff to current |
2009-12-17 |
Bdale Garbee | move pin 19 on Venus from RF ground to system ground... |
blob | commitdiff | raw | diff to current |
2009-12-12 |
Bdale Garbee | swap cs0 and cs1 pin assignments on cc1111 |
blob | commitdiff | raw | diff to current |
2009-12-11 |
Bdale Garbee | fixed u.fl refdes |
blob | commitdiff | raw | diff to current |
2009-12-11 |
Bdale Garbee | cleaning up top layer silk |
blob | commitdiff | raw | diff to current |
2009-12-10 |
Bdale Garbee | fix solder mask dimension on beeper pins |
blob | commitdiff | raw | diff to current |
2009-12-10 |
Bdale Garbee | update pcb to use correct locking footprint for compani... |
blob | commitdiff | raw | diff to current |
2009-12-10 |
Bdale Garbee | working on attributes to be able to put board out for... |
blob | commitdiff | raw | diff to current |
2009-12-09 |
Bdale Garbee | combine gps and cc1111 reset inputs into one net, elimi... |
blob | commitdiff | raw | diff to current |
2009-12-09 |
Bdale Garbee | shoving connector side silk around to avoid vias |
blob | commitdiff | raw | diff to current |
2009-12-08 |
Bdale Garbee | change to plated holes for MicroMaTch connector index... |
blob | commitdiff | raw | diff to current |
2009-12-08 |
Bdale Garbee | various improvements in the layout |
blob | commitdiff | raw | diff to current |
2009-12-06 |
Bdale Garbee | re-arrange pins on companion board connector at Keith... |
blob | commitdiff | raw | diff to current |
2009-12-04 |
Bdale Garbee | all DRC issues resolved origin/movecpu |
blob | commitdiff | raw | diff to current |
2009-12-03 |
Bdale Garbee | fixing DRC issues |
blob | commitdiff | raw | diff to current |
2009-12-03 |
Bdale Garbee | added silk area for serial number, etc |
blob | commitdiff | raw | diff to current |
2009-12-03 |
Bdale Garbee | layout fully routed, but not yet pretty |
blob | commitdiff | raw | diff to current |
2009-12-03 |
Bdale Garbee | 4 unrouted nets |
blob | commitdiff | raw | diff to current |
2009-12-03 |
Bdale Garbee | snapshot to show keithp |
blob | commitdiff | raw | diff to current |
2009-12-02 |
Bdale Garbee | Merge branch 'backside' |
blob | commitdiff | raw | diff to current |
2009-12-02 |
Bdale Garbee | lots of work on the layout tonight origin/backside |
blob | commitdiff | raw | diff to current |
2009-11-21 |
Bdale Garbee | eliminate C33 since testing implies one 100uF cap on... |
blob | commitdiff | raw | diff to current |
2009-11-20 |
Bdale Garbee | rework vendor part number tags, switch diodes to footpr... |
blob | commitdiff | raw | diff to current |
2009-11-19 |
Bdale Garbee | shorten connector name and take spaces out |
blob | commitdiff | raw | diff to current |
2009-11-19 |
Bdale Garbee | snapshot work in progress, change of pinout on 8 bin... |
blob | commitdiff | raw | diff to current |
2009-11-16 |
Bdale Garbee | snapshot, layout incomplete |
blob | commitdiff | raw | diff to current |
2009-11-07 |
Bdale Garbee | change pyro battery to 2-pin 2mm connector just like... origin/nextcut |
blob | commitdiff | raw | diff to current |
2009-11-03 |
Bdale Garbee | change pyro battery connector to 3-pin picoblade to... |
blob | commitdiff | raw | diff to current |
2009-11-03 |
Bdale Garbee | cleaning things up, particularly back side silk screen... |
blob | commitdiff | raw | diff to current |
2009-11-02 |
Bdale Garbee | board routed, many DRC issues resolved, some remain |
blob | commitdiff | raw | diff to current |
2009-11-01 |
Bdale Garbee | pcb routed, but various drc errors still exist |
blob | commitdiff | raw | diff to current |
2009-11-01 |
Bdale Garbee | snapshot work in progress on v0.2 |
blob | commitdiff | raw | diff to current |
2009-10-30 |
Bdale Garbee | snapshot, on 777 between KIX and SFO |
blob | commitdiff | raw | diff to current |
2009-10-23 |
Bdale Garbee | snapshot of work in process mn5010hs origin/mn5010hs |
blob | commitdiff | raw | diff to current |
2009-10-22 |
Bdale Garbee | snapshot |
blob | commitdiff | raw | diff to current |
2009-10-12 |
Bdale Garbee | work in process on revising the pcb artwork for v0.2 |
blob | commitdiff | raw | diff to current |
2009-10-10 |
Bdale Garbee | revert pcb artwork to v0.1 for now |
blob | commitdiff | raw | diff to current |
2009-08-25 |
Bdale Garbee | PCB changes to account for FET swap |
blob | commitdiff | raw | diff to current |
2009-08-06 |
Bdale Garbee | work in progress |
blob | commitdiff | raw | diff to current |
2009-06-03 |
Bdale Garbee | add a silk screen block near the GPS antenna for record... |
blob | commitdiff | raw | diff to current |
2009-06-02 |
Bdale Garbee | clear out planes under the GPS antenna |
blob | commitdiff | raw | diff to current |
2009-06-02 |
Bdale Garbee | working on layout with GPS ... add 0.25 inches to lengt... |
blob | commitdiff | raw | diff to current |
2008-12-26 |
Bdale Garbee | open up clearances on the holes in the cc1111 footprint fab-v0.1 |
blob | commitdiff | raw | diff to current |
2008-12-26 |
Bdale Garbee | holes in ground tab under CC1111 changed to solidly... |
blob | commitdiff | raw | diff to current |
2008-12-26 |
Bdale Garbee | major update of CC1111 footprint to get mask and paste... |
blob | commitdiff | raw | diff to current |
2008-12-26 |
Bdale Garbee | part and via shoves and other solder mask improvements... |
blob | commitdiff | raw | diff to current |
2008-12-24 |
Bdale Garbee | add gate resistors, and swap FET drain and source to... |
blob | commitdiff | raw | diff to current |
2008-12-24 |
Bdale Garbee | fix via mask clearance issues -- clean report from... |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | adding more silkscreen labels |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | improve layout around CC1111 and get traces at least... |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | freshen U5 footprint to better match measured part... |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | fix bottom layer ground plane around SMA connector... |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | updated netlist and pin names to match current schematic |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | ground plane around SMA connector corrected |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | mucho rework to fix accelerometer and SMA footprints... |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | fix several mask clearance issues |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | keep traces farther away from mounting holes, just... |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | tweaks identified during design review online with... |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | improved SuperSOT3 footprints |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | pull planes back to 10 mils from pcb edges to avoid... |
blob | commitdiff | raw | diff to current |
2008-12-23 |
Bdale Garbee | fixes for DFM issues |
blob | commitdiff | raw | diff to current |
2008-12-21 |
Bdale Garbee | use v_lipo not 3.3V for input to the 5V charge-pump... |
blob | commitdiff | raw | diff to current |
2008-12-21 |
Bdale Garbee | add a pullup on the cc1111 RESET_N input even though... |
blob | commitdiff | raw | diff to current |
2008-12-21 |
Bdale Garbee | remove SMA connector from solder paste gerber layer |
blob | commitdiff | raw | diff to current |
2008-12-20 |
Bdale Garbee | tweaks before putting out for broader review |
blob | commitdiff | raw | diff to current |
2008-12-20 |
Bdale Garbee | change to 4-lead symbol for SMT crystal, and get the... |
blob | commitdiff | raw | diff to current |
2008-12-20 |
Bdale Garbee | correct pin numbering on SOT23-5 footprint |
blob | commitdiff | raw | diff to current |
2008-12-20 |
Bdale Garbee | add pin one spots in silkscreen for ICs that didn't... |
blob | commitdiff | raw | diff to current |
2008-12-20 |
Bdale Garbee | update reference designators in pcb, and clean up resul... |
blob | commitdiff | raw | diff to current |
2008-12-20 |
Bdale Garbee | add project name, copyright, and license assertion... |
blob | commitdiff | raw | diff to current |
2008-12-19 |
Bdale Garbee | no showstoppers in freedfm.com output any more |
blob | commitdiff | raw | diff to current |
2008-12-19 |
Bdale Garbee | fix up a couple pad and mask dimension issues |
blob | commitdiff | raw | diff to current |
2008-12-19 |
Bdale Garbee | add solder mask clearance holes for all vias, fix sma... |
blob | commitdiff | raw | diff to current |
2008-12-18 |
Bdale Garbee | move temp sensor to avoid cp2103 debug interface when... |
blob | commitdiff | raw | diff to current |
2008-12-15 |
Bdale Garbee | passes DRC in pcb, sent out to freedfm.com for analysis |
blob | commitdiff | raw | diff to current |
2008-12-13 |
Bdale Garbee | dual ejection connector footprints, picoblade or screw... |
blob | commitdiff | raw | diff to current |
2008-12-11 |
Bdale Garbee | move to four mounting holes, vertical battery connector |
blob | commitdiff | raw | diff to current |
2008-12-11 |
Bdale Garbee | replaced serial connector with vertical through-hole... |
blob | commitdiff | raw | diff to current |
next |