2019-08-16 |
Bdale Garbee | move workflow from gEDA to lepton-eda -> pcb-rnd |
commit | commitdiff |
2019-07-27 |
Keith Packard | Switch pyro series resistors to 1k |
commit | commitdiff |
2017-08-07 |
Bdale Garbee | be consistent about thermaling mounting holes on UHF... |
commit | commitdiff |
2015-10-26 |
Bdale Garbee | move to preferred parts database fab-v2.0b2 |
commit | commitdiff |
2014-10-26 |
Keith Packard | Switch to Mouser for LM293QT parts fab-v2.0b |
commit | commitdiff |
2014-10-26 |
Bdale Garbee | update copyright year in the silk |
commit | commitdiff |
2014-09-15 |
Bdale Garbee | move GPS chip and SAW filter 30 mils farther from GPS... |
commit | commitdiff |
2013-12-27 |
Bdale Garbee | pull inner layers back 15 mils from board edge per AC fab-v2.0 |
commit | commitdiff |
2013-12-19 |
Bdale Garbee | lose the "pad" in the GPS patch footprint quote-v2.0 |
commit | commitdiff |
2013-12-11 |
Bdale Garbee | forward annotate component attributes to pcb file |
commit | commitdiff |
2013-12-11 |
Bdale Garbee | update PCB silk to say version 2.0 |
commit | commitdiff |
2013-08-20 |
Keith Packard | Route beeper pin change |
commit | commitdiff |
2013-08-09 |
Bdale Garbee | clean up silk, etc fab-phoenix |
commit | commitdiff |
2013-08-09 |
Bdale Garbee | fix stm footprint via clearance issue, etc |
commit | commitdiff |
2013-08-09 |
Bdale Garbee | significant placement and copper rework in the UHF... |
commit | commitdiff |
2013-08-08 |
Bdale Garbee | more copper shoving |
commit | commitdiff |
2013-08-08 |
Keith Packard | Move SPI bus wiring from E of cc1120 to W. |
commit | commitdiff |
2013-08-08 |
Keith Packard | Add more grounding under 70cm RF section |
commit | commitdiff |
2013-08-08 |
Bdale Garbee | a number of copper tweaks .. more to do tomorrow |
commit | commitdiff |
2013-08-06 |
Keith Packard | Split power plane to provide ground under 70cm RF section |
commit | commitdiff |
2013-08-05 |
Keith Packard | route complete |
commit | commitdiff |
2013-08-05 |
Keith Packard | Clean up DRC errors |
commit | commitdiff |
2013-08-05 |
Keith Packard | Checkout - 16 rats left, but a few DRC errors |
commit | commitdiff |
2013-08-05 |
Keith Packard | Swapped the comparator slots |
commit | commitdiff |
2013-08-05 |
Keith Packard | Finish first route of SPI links to flash. Route USB. |
commit | commitdiff |
2013-08-05 |
Keith Packard | Routed GPS serial and MS5607 SPI lines. |
commit | commitdiff |
2013-08-05 |
Bdale Garbee | thermal the other two mounting holes |
commit | commitdiff |
2013-08-05 |
Bdale Garbee | update pcb to reflect removal of C600 |
commit | commitdiff |
2013-08-05 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git... |
commit | commitdiff |
2013-08-05 |
Keith Packard | Keithp's attempt at starting to route this board |
commit | commitdiff |
2013-08-04 |
Bdale Garbee | snapshot |
commit | commitdiff |
2013-08-01 |
Bdale Garbee | snapshot |
commit | commitdiff |
2013-05-05 |
Bdale Garbee | work done on CLE->DEN flight |
commit | commitdiff |
2013-05-05 |
Bdale Garbee | lock holes and usb connector placement |
commit | commitdiff |
2013-05-05 |
Bdale Garbee | snapshot |
commit | commitdiff |
2013-05-02 |
Bdale Garbee | snapshot work done on DEN->CLE flight |
commit | commitdiff |
2012-12-11 |
Bdale Garbee | move to local copy of partslistgag script |
commit | commitdiff |
2012-09-28 |
Bdale Garbee | see if we can quiet the AC DRC engine about the guide... |
commit | commitdiff |
2012-09-28 |
Bdale Garbee | clean up various details in the planes and silk, add... |
commit | commitdiff |
2012-09-27 |
Bdale Garbee | move to fresher SMA footprint with broader applicabilit... |
commit | commitdiff |
2011-11-20 |
Bdale Garbee | freshen attribute value v1.2 fab-v1.2 |
commit | commitdiff |
2011-11-14 |
Bdale Garbee | clean up silk around U1 and U3 |
commit | commitdiff |
2011-11-14 |
Bdale Garbee | add Altus Metrum logo in silk |
commit | commitdiff |
2011-11-13 |
Bdale Garbee | improve clearances |
commit | commitdiff |
2011-11-13 |
Bdale Garbee | rotate ADXL78 by 180 degrees so that axis orientation... |
commit | commitdiff |
2011-11-03 |
Bdale Garbee | one more tweak |
commit | commitdiff |
2011-11-03 |
Bdale Garbee | much copper tweaking while sitting at the rink |
commit | commitdiff |
2011-10-30 |
Bdale Garbee | replace accel with ADXL78 .. more copper cleanup is... |
commit | commitdiff |
2011-10-26 |
Bdale Garbee | part values changes for v1.2 boards .. Venus, reset... |
commit | commitdiff |
2011-10-19 |
Bdale Garbee | change gnd thing to one larger hole instead of two... |
commit | commitdiff |
2011-10-17 |
Bdale Garbee | charge status led re-wired to avoid false charge comple... |
commit | commitdiff |
2011-10-17 |
Bdale Garbee | clean up copper in various places, now that translucenc... |
commit | commitdiff |
2011-10-17 |
Bdale Garbee | Replace pyro batt footprint with two ground holes for... |
commit | commitdiff |
2011-10-13 |
Bdale Garbee | update version and copyright year |
commit | commitdiff |
2011-10-13 |
Bdale Garbee | reverse the 100uF ballast cap so gnd pin is adjacent... |
commit | commitdiff |
2011-10-13 |
Bdale Garbee | add 1uF bypass cap on LDO input |
commit | commitdiff |
2010-12-09 |
Bdale Garbee | forward annotate flash part change to the pcb data |
commit | commitdiff |
2010-12-07 |
Bdale Garbee | forward annotate addition of name for M25P80 part |
commit | commitdiff |
2010-12-07 |
Bdale Garbee | shorten a gnd trace that keithp spotted |
commit | commitdiff |
2010-12-07 |
Bdale Garbee | forward annotate metadata changes to the artwork |
commit | commitdiff |
2010-12-06 |
Bdale Garbee | found and fixed an errant via in the SMA footprint |
commit | commitdiff |
2010-12-06 |
Bdale Garbee | make all vias that connect to planes be non-thermal... |
commit | commitdiff |
2010-12-06 |
Bdale Garbee | take power-related vias back to 20 mils, route complete... |
commit | commitdiff |
2010-12-06 |
Bdale Garbee | change all vias from 20mil to 15mil drill |
commit | commitdiff |
2010-12-06 |
Bdale Garbee | fix soldermask clearance around U.FL connector |
commit | commitdiff |
2010-12-06 |
Bdale Garbee | tent all vias |
commit | commitdiff |
2010-12-06 |
Bdale Garbee | clean up a DRC error introduced by accidental movement... |
commit | commitdiff |
2010-11-22 |
Bdale Garbee | update silkscreen to reflect v1.1, clean up a few other... |
commit | commitdiff |
2010-11-22 |
Bdale Garbee | reduce size of the gps split ground plane, clean up... |
commit | commitdiff |
2010-11-22 |
Bdale Garbee | pcb updated with accel_ref divider and minus the GPS... |
commit | commitdiff |
2010-11-18 |
Bdale Garbee | update to reflect footprint name change |
commit | commitdiff |
2010-10-01 |
Bdale Garbee | change from DataFlash to M25P80 for on-board data storage |
commit | commitdiff |
2010-08-11 |
Bdale Garbee | redesign reset circuit to completely solve the "cap... |
commit | commitdiff |
2010-05-14 |
Bdale Garbee | cap value change reflected in pcb |
commit | commitdiff |
2010-05-05 |
Bdale Garbee | remove BuildLog since it contains private information |
commit | commitdiff |
2010-03-10 |
Bdale Garbee | replace LDO with TC2185, adding C38 0.1uF bypass cap... quote-v1.0 |
commit | commitdiff |
2010-03-07 |
Bdale Garbee | tweak the position of 'main' so it doesn't crowd 'apoge... |
commit | commitdiff |
2010-03-07 |
Bdale Garbee | move 'pyro' into the B2 component outline since it... |
commit | commitdiff |
2010-03-07 |
Bdale Garbee | move a via and the text to improve 'switch' integrity... |
commit | commitdiff |
2010-03-07 |
Bdale Garbee | move 'companion' in silk screen to avoid vias, change... |
commit | commitdiff |
2010-01-11 |
Bdale Garbee | change reset cap back from 1uF to 0.001uF, note that... |
commit | commitdiff |
2010-01-07 |
Bdale Garbee | two resistor suffixes propagated to pcb file |
commit | commitdiff |
2010-01-02 |
Bdale Garbee | attribute cleanups |
commit | commitdiff |
2009-12-18 |
Bdale Garbee | fix soldermask clearance on gps patch pin |
commit | commitdiff |
2009-12-18 |
Bdale Garbee | update pcb to reflect use of v_charge for GPS vbat |
commit | commitdiff |
2009-12-18 |
Bdale Garbee | move to 16mbit dataflash part since nobody has 32mbit... |
commit | commitdiff |
2009-12-18 |
Bdale Garbee | more copper and mask tweaking |
commit | commitdiff |
2009-12-18 |
Bdale Garbee | fixing soldermask relief issues, etc, identified by... |
commit | commitdiff |
2009-12-18 |
Bdale Garbee | add soldermask clearance to index holes on micromatch... |
commit | commitdiff |
2009-12-18 |
Bdale Garbee | up annular ring design rule to 7 mils, update vias... |
commit | commitdiff |
2009-12-18 |
Bdale Garbee | upgraded geda-gaf to 1.6.0, used gattrib to clean up... |
commit | commitdiff |
2009-12-17 |
Bdale Garbee | move pin 19 on Venus from RF ground to system ground... |
commit | commitdiff |
2009-12-12 |
Bdale Garbee | swap cs0 and cs1 pin assignments on cc1111 |
commit | commitdiff |
2009-12-11 |
Bdale Garbee | fixed u.fl refdes |
commit | commitdiff |
2009-12-11 |
Bdale Garbee | cleaning up top layer silk |
commit | commitdiff |
2009-12-10 |
Bdale Garbee | fix solder mask dimension on beeper pins |
commit | commitdiff |
2009-12-10 |
Bdale Garbee | update pcb to use correct locking footprint for compani... |
commit | commitdiff |
2009-12-10 |
Bdale Garbee | working on attributes to be able to put board out for... |
commit | commitdiff |
2009-12-09 |
Bdale Garbee | combine gps and cc1111 reset inputs into one net, elimi... |
commit | commitdiff |
2009-12-09 |
Bdale Garbee | shoving connector side silk around to avoid vias |
commit | commitdiff |
next |