tcl/target|board: add config Atheros ar9331
[fw/openocd] / tcl /
2015-02-11 Oleksij Rempeltcl/target|board: add config Atheros ar9331
2015-02-11 Pawel Simini51: support for Nuvoton NuMicro M051 series flash...
2015-02-11 Jacob Palssontcl/target: add CC2538 and CC26xx target files (with...
2015-02-11 Ed Berosetem357: added target files for em357 and em358
2015-02-11 Heinz Schweigercfg: TI Tiva C dk-tm4c129x Evaluation Kits
2015-02-11 Tomas Vanekpsoc4: support for Cypress PSoC 41xx/42xx family
2015-02-04 Paul Fertserflash/nor/stm32lx: use 0 base to autodetect second...
2015-02-02 Uwe BonnesAdd more STM32F3 IDs in target/stm32f3.cfg.
2015-01-30 Paul Fertsertcl/target: add lpc8xx.cfg
2015-01-26 Paul Fertsertcl/board: frdm kinetis boards have SRST connected
2015-01-26 Paul Fertsertcl/target/stellaris: Snowflake supports SYSRESETREQ too
2015-01-26 Paul Fertsertcl/target: consolidate Kinetis configs
2015-01-26 Thomas Eichingertcl/board: Add ST NUCLEO L152RE configuration
2015-01-26 Paul Fertsercfg: add srst_nogate to the supported targets, remove...
2015-01-26 Uwe Bonnesstm32f4/nucleo: Use only one configuration for all...
2015-01-26 Uwe Bonnesstm32f0/nucleo: Use only one configuration for all...
2015-01-15 Karl Palssontarget/stm32xx: Endian is not configurable.
2015-01-15 Paul Fertsertcl/interface/ftdi: add config for the IoT-LAB adapter
2015-01-15 Andreas Färbertcl/board: Add TI TMDX570LS20SUSB board config
2015-01-15 Karl Palssoncfg: stm32l1: Use specific chipname
2015-01-09 Spencer Olivercfg: fix lpc17xx regression
2014-12-03 Karl Palssonstm32l: split l0/l1 support no jtag, different HSI...
2014-12-03 Juha Niskanenstm32: Fix L0/1xx CPUTAPID setting and add new L1xx...
2014-11-24 Uwe Bonnestcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz...
2014-11-24 Uwe Bonnestcl/target/stm32f4x: add F401 and F411 IDs
2014-11-02 Paul Fertsertcl/interface/ftdi/swd-resistor-hack: clarify and add...
2014-10-16 Spencer Olivercmsis-dap: add serial number support
2014-10-06 Spencer Olivercfg: remove incorrect execute permissions
2014-10-06 Rémi PRUD'HOMMEstm32: Add config file for a new board STM32L052 dsicovery
2014-10-06 Rémi PRUD'HOMMEstm32: add L0xx CPUTAPID
2014-10-06 Paul Fertserinterface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control...
2014-09-29 Karl Palssontcl/board: add TI Tiva C ek-tm4c1294xl config
2014-09-22 Andreas Fritiofsontarget: Remove "-variant" argument
2014-09-22 Austin PhillipsSupport hla_serial command for ST-LINK adapters.
2014-09-15 Nemui Trinomiuscfg: Added Nucleo-F411RE board config.
2014-09-15 Paul Fertsertcl/board/sheevaplug: add adapter_khz setting
2014-09-11 Paul Fertsertcl/interface/ftdi/sheevaplug: fix device description
2014-09-08 Vanya Sergeevcfg: refactor lpc1xxx targets onto one base config
2014-09-08 Бурага Александрtcl/target: add config for К1879ХБ1Я, a hybrid ARM11...
2014-09-08 Paul Fertsertcl/interface/ftdi: fix TRST for Olimex TINY adapters
2014-09-08 Paul Fertsertcl/interface/ftdi: add kt-link config (with SWD) for...
2014-09-08 Paul Fertsertcl/target/imx6: add yet another SJC tapid
2014-08-19 Paul Fertsertcl/interface/ftdi: auto-select SWD from converters...
2014-08-19 Eldar Khayrullintcl/board/stm32ldiscovery: fix breakage
2014-08-11 Andrey Smirnovtcl/board: Add board configuration for nRF51822-mKIT
2014-08-11 Angus GrattonnRF51822: Add workaround for PAN-16 where not all RAM...
2014-08-11 Andrey Skvortsovtcl/target: added support for TI OMAP/AM 3505 and 3517
2014-08-11 Paul FertserAllow transports to override the selected target (hla...
2014-08-04 Andreas Fritiofsoninterface/ftdi: Mark flyswatter.cfg as tested
2014-08-02 Paul Fertsertcl/board: fix all the remaining boards that were sourc...
2014-07-10 Fredrik Hederstiernatcl/board: add STM32429I-EVAL and STM32439I-EVAL dev...
2014-07-10 Paul Fertsertcl/target/stm32l: restore slow clock on reset
2014-07-10 Thomas SchmidAdding support for the Atmel SAMR21.
2014-07-08 Andreas Fritiofsoncfg: Rename leftover cortex_a8 -> cortex_a
2014-06-28 Spencer Olivercfg: add SWD configs for stellaris ftdi based adapters
2014-06-28 Paul Fertsertcl/interface/ftdi: add SWD configs for kt-link, olimex...
2014-06-28 Paul Fertserjtag/drivers/ftdi: require defining SWD_EN signal for...
2014-06-28 Paul FertserAuto-select JTAG transport when appropriate
2014-06-28 Andreas Fritiofsoncfg: Add SWD support to JTAG-lock-pick Tiny 2
2014-06-28 Andrey Smirnovcortex_m: Do additional initialization during reset
2014-06-28 Paul Fertsertcl: introduce using_(jtag|swd|hla) helpers and use...
2014-06-22 Paul Fertsertcl/target/fm3.cfg: use a CHIPNAME known by the flash...
2014-06-22 Franck Jullienopenrisc: add support for JTAG Serial Port
2014-06-22 Tom Rinitcl/target/am335x.cfg: Drop gdb-attach stanza
2014-06-19 Nemui Trinomiuscfg: Added Nucleo-F334R8 board config.
2014-06-18 Marco Cruztcl/board: add Atmel SAM4E-EK
2014-06-01 Paul Fertsertcl/target/kl25.cfg: add maximum speed specification
2014-06-01 Paul Fertsertcl: add ASUS RT-N66U config
2014-05-16 Yegor YefremovKS869x: add new target
2014-05-10 Andrey Smirnovkinetis: Revise CPU un-securing code
2014-05-05 Andrey Smirnovgeneralplus: Add configuration file for General Plus...
2014-05-05 Ash CharlesAdd support for Gumstix AeroCore device
2014-04-14 Seth LaForgecortex_a: fix endiannes issues on TI TMS570
2014-04-14 Lee Bowyertcl: bcm6348 target config, BT HomeHub v1 board config
2014-03-29 Paul Fertsertcl/target: make milandr configs swd-compatible
2014-03-29 Andrey Smirnovnrf51: Add UICR writing support
2014-03-29 Franck Julliencfg: or1k_generic: allow TAP_TYPE override
2014-03-29 Tim Sandertcl: add Zynq-7000 target and Zedboard board configs
2014-03-29 Felipe Balbicfg: add TI am43xx devices
2014-03-17 Jens Hoffmanncfg: Added st nucleo board configs.
2014-03-17 Felipe Balbitcl: target: icepick: add icepick_d_tapenable procedure
2014-03-17 Paul Fertsertcl/interface/ftdi: add Digilent JTAG-SMT2 config
2014-03-17 Spencer Olivercfg: change default SAM4L cortex_m reset_config
2014-03-17 Jörg WunschMake the Atmel SAM3 family SWD-aware
2014-03-17 Paul Fertsertcl/board: add config for DP Bus Blaster reconfiguration
2014-03-17 Bartosz Bielawskistlink_usb.c: add support for STLink V2-1
2014-03-09 Tim Krygerbcm281xx: Add bcm281xx SoC and bcm28155_ap board
2014-03-09 Tom Riniinterface/ftdi/xds100v2.cfg: Add another VID/PID, drop...
2014-03-07 Tom Rinicfg: Switch ti_beaglebone to new ftdi interface
2014-03-04 Andrey YurovskyAdd support for the Atmel SAMG53
2014-02-24 Andrey Smirnovnrf51: Implement the support for Nordic's nRF51 devices
2014-02-24 Fatih Aşıcıcfg: Make stm32f4x usable with SWD transport
2014-02-11 Adrian Burnsquark_x10xx: add new target quark_x10xx
2014-02-11 Paul Fertserinterface/ftdi/xds100v2.cfg: default to reset state...
2014-02-04 Paul Fertserinterface/ftdi: add TUMPA Lite config
2014-01-29 Spencer Olivercfg: LPC17xx default to using SYSRESETREQ to reset...
2014-01-20 Franck Jullienjtag/drivers: add USB-Blaster II
2014-01-20 Spencer Olivercfg: add Freescale FRDM-KL46Z Board
2014-01-15 Andrey YurovskyAtmel samd: add support for SAMD21
2014-01-09 Andrey Yurovskyadd support for Atmel SAMD NOR Flash
next