cfg: add stm32ldiscovery board config
[fw/openocd] / tcl / target /
2010-08-01 Peter StugeRemove srst_pulls_trst from LPC2148 target
2010-07-30 Øyvind Harboelpc7168: make flash available upon reset init
2010-07-17 David Brownelllm3s811-ek uses generic stellaris target config
2010-07-13 Spencer Olivercfg: add Avalue RSC-W910 config
2010-06-25 Olaf Lükeat91sam3s* support
2010-06-15 Thomas KoellerDM36x: pll & clock setup
2010-06-15 michal smulskiarm1136 scripts
2010-05-26 Spencer Olivercfg: add pic32 virtual banks
2010-05-24 Freddie ChopinThere are no variants of arm7tdmi target
2010-05-24 Freddie ChopinAll LPC2xxx chips are little endian and that cannot...
2010-05-24 Freddie Chopinadd correct CPUTAPID value for LPC2129
2010-05-24 Freddie ChopinUpdate "flash bank" helper comments for LPC2xxx chips
2010-05-24 Freddie ChopinLPC23xx and LPC24xx after reset run on internal 4MHz...
2010-05-21 Øyvind Harboeat91sam9260: use RCLK
2010-05-18 Marc Pignatat91rm9200 : reset_config should go to the board config...
2010-05-13 Spencer Oliverscripts: update flash bank names
2010-04-24 michal smulskitelo: update configuration scripts to matched master...
2010-03-26 Antonio BorneoTCL scripts: update to current "flash bank" syntax
2010-03-16 Spencer OliverPIC32: add Microchip Explorer16 cfg
2010-03-15 David Brownellrename jtag_nsrst_assert_width as adapter_nsrst_assert_...
2010-03-15 David Brownellrename jtag_nsrst_delay as adapter_nsrst_delay
2010-03-15 David Brownellrename jtag_khz as adapter_khz
2010-03-15 Spencer OliverPIC32MX: update cfg script
2010-03-10 Spencer OliverPIC32: add flash algorithm support
2010-03-02 David BrownellLPC1768 updates, IAR board support
2010-02-28 Mariano AlviraAdd target/mc13224v.cfg
2010-02-15 David BrownellLPC1768.cfg -- partial fixes for bogus reset-init handler
2010-02-11 Viktar Palstsiuktarget library: configuration files for openocd tested...
2010-02-09 Spencer Oliverstr730.cfg: fix incorrect mem regions
2010-02-04 Ethan Eadescripts: Phytec/LPC2350 config scripts
2010-02-02 Harald KippAT91R40008/Ethernut 3 configuration
2010-02-02 Edgar Grimbergtcl/str7x: Reset init unlocks the flash
2010-02-02 Edgar Grimbergflash/str7x: After reset init the flash is unlocked
2010-01-20 Michael Grzeschiktcl/target/at91sam3u4e.cfg: changed case in dependent...
2010-01-05 Spencer OliverPIC32: enable ram execution
2009-12-17 Spencer Olivertarget.cfg: update to use new flash configuration syntax
2009-12-15 David Brownellmore tcl/{board,target} cleanup
2009-12-15 David Brownelltesting/examples/.../*cfg: rm jtag_device calls
2009-12-15 mkdorg@users.sourc... target: add basic dsp563xx support
2009-12-15 Øyvind Harboeimx31: move srst delay into config script
2009-12-15 David Brownelllm3748: use new Stellaris config file
2009-12-15 Yegor YefremovCommon target file for Stellaris chips
2009-12-07 David BrownellOMAP2420: define reset-assert event
2009-12-01 David BrownellTcl and doc: update to match new 'arm mcr ...' etc
2009-12-01 Øyvind Harboetarget: at91eb40a.cfg is a board, not a target.
2009-11-29 Marek Vasutcreate target/pxa3xx.cfg
2009-11-28 David Brownellomap3530.cfg: use new "reset-assert" event
2009-11-26 David Brownellomap3530.cfg: yes we have SRAM!
2009-11-20 David Brownelltarget.cfg: TAP id for Hilscher netX 500
2009-11-19 Zachary T Welchupdate 'flash bank' usage in scripts
2009-11-17 David BrownellARM: "armv4_5" command prefix becomes "arm"
2009-11-14 David BrownellARM11: ETM + ETB support
2009-11-14 David BrownelliMX2* + ETB targets: hook up ETM and ETB
2009-11-13 David Brownelltarget.cfg: label ETBs correctly
2009-11-10 David Brownelltarget.cfg: (re)move some bogus reset_config lines
2009-11-10 Thomas Kindlerstm32.cfg: remove reset_config
2009-11-10 Øyvind HarboeARM11: remove old mrc/mcr commands
2009-11-10 Øyvind Harboetelo.cfg: fix search paths
2009-11-08 David Brownelltarget.cfg: remove "-work-area-virt 0"
2009-11-01 Freddie Chopinremove "-ircapture 0x1 -irmask 0x1" from stm32.cfg
2009-10-31 Freddie Chopintarget.cfg: use $_TARGETNAME for flash
2009-10-27 David BrownellPXA255: force reset config
2009-10-27 David Brownellomap3530: target reset/init improvements
2009-10-25 Øyvind Harboefix syntax of mww phys.
2009-10-21 Øyvind Harboemww_phys retired. Replaced by generic mww phys in target.c
2009-10-20 Øyvind HarboeAdded the faux flash driver and target. Used for testing.
2009-10-20 David Brownelldavinci: add watchdog reset method
2009-10-14 Øyvind HarboeiMX target config script's ported from Freescale BSP.
2009-10-14 David Brownellomap2420.cfg updates
2009-10-13 Øyvind Harboearm11 seems to gate JTAG when srst is asserted
2009-10-12 Øyvind HarboeMerge commit 'origin/master'
2009-10-12 Øyvind HarboeSupply default reset_config statement to make target...
2009-10-10 WookeyFix reset delays and tinker with ID's
2009-10-09 Øyvind HarboeMerge commit 'origin/master'
2009-10-09 David Brownellmake PXA255 targets enumerate sort-of-OK
2009-10-08 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-08 David Brownellmake OMAP5912 resets more reliable
2009-10-08 John RigbyiMX25 target support
2009-10-06 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-06 dbrownellDragonite target script
2009-10-05 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-05 dbrownellAdd a new JTAG "setup" event; use for better DaVinci...
2009-10-05 dbrownellGet rid of needless OMAP and Davinci target config...
2009-10-02 mluUpdated reset event handling in omap3530 cfg
2009-09-30 dbrownellRemove annoying EOL whitespace (again, sigh).
2009-09-30 oharboestrip gdb config options
2009-09-30 oharboemichal smulski <michal.smulski@ooma.com> reset now...
2009-09-27 dbrownellDon't provide invalid OMAP5912 IR capture value/mask...
2009-09-25 dbrownellUpdate DM355 target config to know about ICEpick.
2009-09-25 oharboeMichael Hasselberg <mh@open-engineering.de> target...
2009-09-21 dbrownellRemove annoying end-of-line whitespace from tcl/* files
2009-09-21 dbrownellEnsure that DaVinci chips can't start with a too-fast...
2009-09-19 mluReduced sleep time after reset
2009-09-18 mluMove Cortex A8 debug access initialisation from omap353...
2009-09-16 oharboeRolf Meeser <rolfm_9dq@yahoo.de> adds flash support...
2009-09-13 oharboeMagnus Lundin <lundin@mlu.mine.nu> Disable poll while...
2009-09-12 oharboeDavid Brownell <david-b@pacbell.net>
2009-09-11 oharboetap post reset event added. Allows omap3530 to send...
2009-09-11 oharboesyntax error fix
2009-09-10 oharboemichal smulski <michal.smulski@ooma.com> telo target...
next