- added jlink support, based on Jürgen Stuber patch
[fw/openocd] / src / jtag /
2008-05-14 ntfreak- added jlink support, based on Jürgen Stuber patch
2008-05-12 ntfreak- restored tabs and formatting
2008-05-10 mifi- corrected rounding in ft2232_khz
2008-05-10 mifi- added support for ft2232/jtag_khz
2008-05-07 oharboeThis matters for embedded devices, but is probably...
2008-04-30 oharboeEdgar's naming convention fixes.
2008-04-30 oharboeEdgar's added support for printing jtag_khz
2008-04-23 oharboeTim Hudson: removed setting jtag_speed directly (which...
2008-04-16 oharboefix for gaffe in 555 that stopped JTAG chain examine...
2008-04-13 oharboeA dummy driver to test codepath w/no contact w/target.
2008-04-13 oharboe- Set up ICE registers after TRST
2008-04-11 oharboeReset wip. Just adding hooks. This is just to reduce...
2008-04-09 oharboeback out Don Porges workaround for some device with...
2008-04-09 oharboeDon Porges fixed c99 issues.
2008-04-09 oharboe- added "init" command. "init" and "reset" at end of...
2008-04-08 oharboeuse jtag.c's cur/end_state global variables.
2008-04-08 oharboePavel pointed out that jtag_add_tlr() is better than...
2008-04-08 oharboeThe endstate now reports the endstate of the queue...
2008-04-04 oharboeadded query of reset speed
2008-04-01 oharboe- fixes for jtag_khz committed.
2008-03-31 oharboeDo not assert trst in srst_only case even if srst_pulls...
2008-03-31 oharboemake jtag_add_statemove() internal to the driver.
2008-03-26 oharboeTAP_SD/SI are now forbidden end states.
2008-03-25 ntfreak- rename log functions to stop conflicts under win32...
2008-03-22 ntfreak- changed jtag_add_reset errors to warnings
2008-03-17 drath- fix warnings during configure cause by ecosboard...
2008-03-13 oharboeclarified jtag_khz command.
2008-03-13 oharboeadded jtag_khz for use with target library
2008-03-13 oharboe- adds two speeds to jtag_speed. reset and post reset...
2008-03-13 oharboemarked infinite loop in code w/TODO and fixed warning.
2008-03-12 oharboeDominic undid some of my damage. CLK should now be...
2008-03-12 oharboeThe bitbang driver leaves the TCK 0 when in idle
2008-03-12 oharboeThis moves common code into functions so as to make...
2008-03-11 oharboereduce compare noise. If someone should be crazy enough...
2008-03-11 oharboe- retired unused jtag events. The code was incorrect
2008-03-11 oharboeJTAG_END_STATE is now retired. It is no longer queued.
2008-03-11 oharboe- fixed jtag_add_reset(). It no longer causes jtag_exec...
2008-03-10 oharboebacked out changes from 483.
2008-03-10 oharboePavel Chromy: the attached patch refines PRESTO support...
2008-03-10 oharboe- the jtag chain is examined and validated after GDB...
2008-03-07 oharboeMichael Bruck: fixed warnings
2008-03-07 oharboePavel Chromy, the patch fixes an issue with PRESTO...
2008-03-06 oharboetms is never referenced, confusing old code left behind...
2008-03-06 oharboecomment.
2008-03-06 oharboemake debug code w.r.t. incorrect args for bypass stricter.
2008-03-05 oharboe- This speeds up dcc arm7_9 bulk write a little bit...
2008-03-05 oharboeadded jtag_add_dr_out(). Better for hw fifo, same for...
2008-03-02 oharboeUwe Hermann tightned up comments, etc. to follow OpenOC...
2008-03-01 oharboewip. fixed gaffe in jtag_add_shift()
2008-03-01 oharboeerror handling fix.
2008-02-29 oharboeUwe Hermann:
2008-02-28 oharboefix gaffe.
2008-02-28 oharboefix from Pavel Chromy
2008-02-28 oharboejtag_add_shift() fn - minidriver work in progress.
2008-02-28 drath- fix line-endings
2008-02-28 oharboeUwe Hermann fixed some warnings.
2008-02-27 drath- fix typo in ep93xx jtag driver to allow OpenOCD compi...
2008-02-27 drath- fix bug in ft2232 pathmove (thanks to Michael Bruck...
2008-02-26 oharboefix naming conflict under Windows.
2008-02-26 oharboeoopss.. another jtag minidriver reset gaffe.
2008-02-26 oharboejtag_add_reset() minidriver gaffe fixed.
2008-02-26 oharboeNext step in the JTAG minidriver. This should be fairly...
2008-02-26 oharboe- jtag minidriver work in progress
2008-02-25 ntfreak- remove build warnings
2008-02-25 drath- convert all files to unix line-ending
2008-02-25 oharboeformatting.
2008-02-25 oharboePavel Chromy style fixes.
2008-02-25 oharboeFix from Pavel Chromy.
2008-02-25 oharboeFrom Michael Bruck
2008-02-25 oharboe- using ERROR_COMMAND_SYNTAX_ERROR to print syntax...
2008-02-24 drath- concretize JTAG state transition rules (previously...
2008-02-24 oharboesharpend JTAG docs w.r.t. hw fifo implementations and...
2008-02-24 oharboecosmetic fixes to debug output + phasing out printf...
2008-02-18 ntfreak- fix broken JTAG error handling
2008-02-11 mifi- removed "starting point" for ngw100, will add it...
2008-02-10 mifi- added starting point for development on a ngw100...
2008-02-10 mifi- added patch to change pathmove handling
2008-02-04 ntfreakAdded patch to stop SEGFAULT with missing jtag config...
2008-01-22 mifi- added patch to fix brocken STR9 line
2008-01-20 mifi- added patch "remove error handler as planned"
2008-01-11 ntfreak- debug handler file not closed - (thanks to oyvind...
2008-01-07 mifi- added gdb flash fixes patch
2007-12-29 ntfreak- minimum autoconf 2.59 is now required and verified...
2007-12-18 mifi- added patch for new flash functionality like:
2007-12-10 mifi- Fixing two compiler warnings
2007-12-09 mifi- added patch to display device information as INFO too
2007-11-23 ntfreak- added support for Hitex STM32 Performance Stick
2007-10-01 ntfreak- flash autoerase <on|off> cmd added, default is off...
2007-09-10 mlu- added ft2232_latency command
2007-09-05 drathPatch by Michael Schwingen that
2007-08-25 drath- added support for setting JTAG frequency on ASIX...
2007-08-16 drath- update jtag_speed setting when changing it during...
2007-08-14 drath- corrected automake script
2007-08-14 drath- reworked presto.c to allow use of either FTD2XX or...
2007-08-10 drath- renamed M5960 USB JTAG to "flyswatter"
2007-07-31 drath- calculate cycles since last executed instruction...
2007-07-26 drath- restrict direct parallel port access to x86 platforms...
2007-07-25 drath- reformat src/jtag/bitq.c (thanks to Pavel Chromy)
2007-07-15 drath- added support for Asix Presto JTAG interface (thanks...
2007-06-21 drath- added support for Intel/Marvel PXA27x (XScale) targets
next