From: Bdale Garbee Date: Tue, 17 Nov 2020 18:08:23 +0000 (-0700) Subject: break large paragraph in two X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=f054fabaefdbe21accdd658cc7e00193430a8722;p=web%2Faltusmetrum break large paragraph in two --- diff --git a/EasyMotor/index.mdwn b/EasyMotor/index.mdwn index 87c8f62..281de31 100644 --- a/EasyMotor/index.mdwn +++ b/EasyMotor/index.mdwn @@ -26,7 +26,9 @@ test flights of EasyMotor. The sensor bodies are 316 stainless with a 1/8 NPT male boss, so the approach chosen is to drill a 1/8 inch touch hole all the way through the closure, then drill and tap 1/8 NPT female threads part way through the closure thickness. The hole gets filled with grease and the -sensor screwed in. The first example is a 98mm snap-ring clossure, with the +sensor screwed in. + +The first example is a 98mm snap-ring clossure, with the sensor and electronics mounted off-center so a 3/8" all-thread could be used in the center for motor retention in a minimum-diameter-ish airframe. The mounting bracket for the electronics was bent from a bit of 1/16" aluminum