From: Nicolas Pitre Date: Tue, 27 Oct 2009 05:14:32 +0000 (-0400) Subject: ARM: call thumb_pass_branch_condition() only for actual branch opcodes X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=ee8e93cb836bc01581329c5685c888c4d85e6c1b;p=fw%2Fopenocd ARM: call thumb_pass_branch_condition() only for actual branch opcodes Calling it first with every opcodes and then testing if the opcode was indeed a branch instruction is wasteful and rather strange. If ever thumb_pass_branch_condition() has side effects (say, like printing a debugging traces) then the result would be garbage for most Thumb instructions which have no condition code. While at it, let's make the nearby code more readable by reducing some of the redundant brace noise and reworking the error handling construct. Signed-off-by: Nicolas Pitre Signed-off-by: David Brownell --- diff --git a/src/target/arm_simulator.c b/src/target/arm_simulator.c index e2f49c390..646baea70 100644 --- a/src/target/arm_simulator.c +++ b/src/target/arm_simulator.c @@ -309,19 +309,17 @@ int arm_simulate_step_core(target_t *target, uint32_t *dry_run_pc, struct arm_si { uint16_t opcode; - if ((retval = target_read_u16(target, current_pc, &opcode)) != ERROR_OK) - { + retval = target_read_u16(target, current_pc, &opcode); + if (retval != ERROR_OK) return retval; - } - if ((retval = thumb_evaluate_opcode(opcode, current_pc, &instruction)) != ERROR_OK) - { + retval = thumb_evaluate_opcode(opcode, current_pc, &instruction); + if (retval != ERROR_OK) return retval; - } instruction_size = 2; /* check condition code (only for branch instructions) */ - if ((!thumb_pass_branch_condition(sim->get_cpsr(sim, 0, 32), opcode)) && - (instruction.type == ARM_B)) + if (instruction.type == ARM_B && + !thumb_pass_branch_condition(sim->get_cpsr(sim, 0, 32), opcode)) { if (dry_run_pc) {