From: Bdale Garbee <bdale@gag.com>
Date: Mon, 13 Feb 2023 21:45:06 +0000 (-0700)
Subject: U3 pad clearance is just under 4 mil, which mattered on the
X-Git-Tag: fab-v3.0~2
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=d9cf313e994e8aed5e3d5a80d14b2b5bcd94b0a5;p=hw%2Ftelegps

U3 pad clearance is just under 4 mil, which mattered on the
upper right corner since it violated AC std spec min spacing
due to the top plane flood.  Changed the two adjacent pads on
that corner to 6 mil clearance to ensure we're good, looks ok
---

diff --git a/telegps.lht b/telegps.lht
index 947c577..1932673 100644
--- a/telegps.lht
+++ b/telegps.lht
@@ -3769,7 +3769,7 @@ ha:pcb-rnd-board-v8 {
        }
       }
       ha:padstack_ref.49394 {
-       proto=5; x=613.0mil; y=637.0mil; rot=0.000000; xmirror=0; smirror=0; clearance=6.0mil;
+       proto=5; x=613.0mil; y=637.0mil; rot=0.000000; xmirror=0; smirror=0; clearance=6.5mil;
        ha:flags {
         clearline=1
        }
@@ -16032,7 +16032,7 @@ ha:pcb-rnd-board-v8 {
            }
           }
           ha:padstack_ref.28167 {
-           proto=6; x=13.856462mm; y=21.143722mm; rot=90.000000; xmirror=0; smirror=0; clearance=3.935mil;
+           proto=6; x=13.856462mm; y=21.143722mm; rot=90.000000; xmirror=0; smirror=0; clearance=5.0mil;
            ha:flags {
             clearline=1
            }
@@ -16116,7 +16116,7 @@ ha:pcb-rnd-board-v8 {
            }
           }
           ha:padstack_ref.28173 {
-           proto=5; x=613.44mil; y=666.1mil; rot=90.000000; xmirror=0; smirror=0; clearance=3.935mil;
+           proto=5; x=613.44mil; y=666.1mil; rot=90.000000; xmirror=0; smirror=0; clearance=6.0mil;
            ha:flags {
             clearline=1
            }
@@ -16130,7 +16130,7 @@ ha:pcb-rnd-board-v8 {
            }
           }
           ha:padstack_ref.28174 {
-           proto=6; x=14.85646mm; y=16.194024mm; rot=90.000000; xmirror=0; smirror=0; clearance=3.935mil;
+           proto=6; x=14.85646mm; y=16.194024mm; rot=90.000000; xmirror=0; smirror=0; clearance=6.0mil;
            ha:flags {
             clearline=1
            }
@@ -16706,7 +16706,7 @@ ha:pcb-rnd-board-v8 {
             }
           }
 
-          {ha:top copper}              {
+          {ha:top copper}                {
            lid=2
            ha:combining {           }
 
@@ -21902,9 +21902,9 @@ ha:pcb-rnd-board-v8 {
       buffer_number = 0
        all_direction_lines = false
       ha:view {
-       flip_y = 1
+       flip_y = 0
       }
-        show_solder_side = 1
+        show_solder_side = 0
     }
    }
   }