From: Keith Packard <keithp@keithp.com>
Date: Wed, 12 Nov 2014 17:57:47 +0000 (-0800)
Subject: Move origin to center of the board edge
X-Git-Tag: telelco-v3.0~757
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=d0c1a79268bb4e993d1fe81cf1ee12b3e5b11342;p=hw%2Faltusmetrum

Move origin to center of the board edge

This makes locating the part along the edge of the board easier

Signed-off-by: Keith Packard <keithp@keithp.com>
---

diff --git a/packages/usb_onboard.5c b/packages/usb_onboard.5c
index 8592648..ee737f4 100644
--- a/packages/usb_onboard.5c
+++ b/packages/usb_onboard.5c
@@ -27,22 +27,22 @@ real power_height = 7.41;
 real data_width = 1.0;
 real data_height = 6.41;
 
-real pad_y = package_height/2 - 8.65;
+real pad_y = 8.65;
 real power_x = 3.5;
 real data_x = 1.0;
 
 element_start("usb_onboard");
 
-rect(-package_width/2, -package_height/2, package_width, package_height);
+rect(-package_width/2, 0, package_width, package_height);
 
 line(-package_width/2, pad_y, package_width/2, pad_y);
 
-pad_mm(-power_x, pad_y + power_height/2, power_width, power_height, "GND", "1");
+pad_mm(-power_x, pad_y - power_height/2, power_width, power_height, "VBUS", "1");
 
-pad_mm(-data_x, pad_y + data_height/2, data_width, data_height, "DP", "2");
+pad_mm(-data_x, pad_y - data_height/2, data_width, data_height, "DM", "2");
 
-pad_mm( data_x, pad_y + data_height/2, data_width, data_height, "DM", "3");
+pad_mm( data_x, pad_y - data_height/2, data_width, data_height, "DP", "3");
 
-pad_mm( power_x, pad_y + power_height/2, power_width, power_height, "VBUS", "4");
+pad_mm( power_x, pad_y - power_height/2, power_width, power_height, "GND", "4");
 
 element_end();