From: bdureau Date: Tue, 1 Mar 2011 12:32:14 +0000 (+0000) Subject: Changes to the Spanish translations X-Git-Tag: upstream/1.1.6^2~13^2~3 X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=b9f83af3c80c2ecd795afd9d97efa44eb8026ded;p=debian%2Fopenrocket Changes to the Spanish translations git-svn-id: https://openrocket.svn.sourceforge.net/svnroot/openrocket/branches/l10n@110 180e2498-e6e9-4542-8430-84ac67f01cd8 --- diff --git a/l10n/messages_es.properties b/l10n/messages_es.properties index b3b09fc3..bdaf19b6 100644 --- a/l10n/messages_es.properties +++ b/l10n/messages_es.properties @@ -1,70 +1,77 @@ - # # Spanish base translation file +# translations provided by Tripoli Spain +# +# Should you need to add new logical keys here is the proposed method +# +# className.ComponantType.componantName # -# Translated by Tripoli Spain ! Set to the name of the current translation file (used for debugging purposes) -debug.currentFile = messages.properties +debug.currentFile = messages_es.properties ! RocketActions -RocketActions.checkbox.Donotaskmeagain = Do not ask me again -RocketActions.lbl.Youcanchangedefop = You can change the default operation in the preferences. -RocketActions.showConfirmDialog.lbl1 = Delete the selected simulations? -RocketActions.showConfirmDialog.lbl2 = This operation cannot be undone. -RocketActions.showConfirmDialog.title = Delete simulations -RocketActions.DelCompAct.Delete = Delete -RocketActions.DelCompAct.ttip.Delete = Delete the selected component. -RocketActions.DelSimuAct.Delete = Delete -RocketActions.DelSimuAct.ttip.Delete = Delete the selected simulation. -RocketActions.DelAct.Delete = Delete -RocketActions.DelAct.ttip.Delete = Delete the selected component or simulation. -RocketActions.CutAction.Cut = Cut -RocketActions.CutAction.ttip.Cut = Cut this component or simulation to the clipboard and remove from this design -RocketActions.CopyAct.Copy = Copy -RocketActions.CopyAct.ttip.Copy = Copy this component (and subcomponents) to the clipboard. -RocketActions.PasteAct.Paste = Paste -RocketActions.PasteAct.ttip.Paste = Paste the component or simulation on the clipboard to the design. -RocketActions.EditAct.Edit = Edit -RocketActions.EditAct.ttip.Edit = Edit the selected component. -RocketActions.NewStageAct.Newstage = New stage -RocketActions.NewStageAct.ttip.Newstage = Add a new stage to the rocket design. -RocketActions.ActBoosterstage = Booster stage -RocketActions.MoveUpAct.Moveup = Move up -RocketActions.MoveUpAct.ttip.Moveup = Move this component upwards. -RocketActions.MoveDownAct.Movedown = Move down -RocketActions.MoveDownAct.ttip.Movedown = Move this component downwards. +RocketActions.checkbox.Donotaskmeagain = No preguntarme nuevamente +RocketActions.lbl.Youcanchangedefop = Puede modificar la operación por defecto con sus preferencias +RocketActions.showConfirmDialog.lbl1 = ¿Borrar las simulaciones seleccionadas? +RocketActions.showConfirmDialog.lbl2 = Esta operación no puede deshacerse. +RocketActions.showConfirmDialog.title = Borrar simulaciones +RocketActions.DelCompAct.Delete = Borrar +RocketActions.DelCompAct.ttip.Delete = Borrar el componente seleccionado +RocketActions.DelSimuAct.Delete = Borrar +RocketActions.DelSimuAct.ttip.Delete = Borrar la simulación seleccionada +RocketActions.DelAct.Delete = Borrar +RocketActions.DelAct.ttip.Delete = Borrar el componente o simulación, seleccionado +RocketActions.CutAction.Cut = Cortar +RocketActions.CutAction.ttip.Cut = Cortar este componente o simulación y copiarlo a la libreta de notas y quitarlo de este diseño +RocketActions.CopyAct.Copy = Copiar +RocketActions.CopyAct.ttip.Copy = Copiar este componente (y subcomponentes) a la libreta de notas +RocketActions.PasteAct.Paste = Pegar +RocketActions.PasteAct.ttip.Paste = Pegar el componente o simulación de la libreta de notas al diseño. +RocketActions.EditAct.Edit = Mostrar +RocketActions.EditAct.ttip.Edit = Mostrar el componente seleccionado +RocketActions.NewStageAct.Newstage = Nueva etapa +RocketActions.NewStageAct.ttip.Newstage = Añadir una nueva etapa al diseño del cohete +RocketActions.ActBoosterstage = Etapa booster +RocketActions.MoveUpAct.Moveup = Mover hacia arriba +RocketActions.MoveUpAct.ttip.Moveup = Mover este componente hacia arriba +RocketActions.MoveDownAct.Movedown = Mover hacia abajo +RocketActions.MoveDownAct.ttip.Movedown = Mover este componente hacia abajo ! RocketPanel -RocketPanel.FigTypeAct.Sideview = Side view -RocketPanel.FigTypeAct.ttip.Sideview = Side view -RocketPanel.FigTypeAct.Backview = Back view -RocketPanel.FigTypeAct.ttip.Backview = Rear view -RocketPanel.lbl.Motorcfg = Motor configuration: -RocketPanel.lbl.infoMessage = Click to select    Shift+click to select other    Double-click to edit    Click+drag to move +RocketPanel.FigTypeAct.Sideview = Vista lateral +RocketPanel.FigTypeAct.ttip.Sideview = Vista lateral +RocketPanel.FigTypeAct.Backview = Vista desde atrás +RocketPanel.FigTypeAct.ttip.Backview = Vista trasera +RocketPanel.lbl.Motorcfg = Configuración del motor +RocketPanel.lbl.infoMessage = Click para seleccionar   Mayúsculas+click para seleccionar otro   Doble-click to mostrar    Click+arrastrar para mover ! BasicFrame -BasicFrame.SimpleFileFilter1 = All rocket designs (*.ork; *.rkt) -BasicFrame.SimpleFileFilter2 = OpenRocket designs (*.ork) -BasicFrame.SimpleFileFilter3 = RockSim designs (*.rkt) -BasicFrame.tab.Rocketdesign = Rocket design -BasicFrame.tab.Flightsim = Flight simulations -BasicFrame.title.Addnewcomp = Add new component -BasicFrame.item.Openrocketdesign = Open a rocket design -BasicFrame.item.Openexamplerocketdesign = Open an example rocket design -BasicFrame.item.SavecurRocketdesign = Save the current rocket design -BasicFrame.item.SavecurRocketdesnewfile = Save the current rocket design to a new file -BasicFrame.item.Printpart = Print parts list and fin template -BasicFrame.item.Closedesign = Close the current rocket design -BasicFrame.item.Quitprogram = Quit the program -BasicFrame.menu.Rocketedt = Rocket editing -BasicFrame.dlg.lbl1 = Design ' -BasicFrame.dlg.lbl2 = ' has not been saved. -BasicFrame.dlg.lbl3 = Do you want to save it? -BasicFrame.dlg.title = Design not saved +BasicFrame.SimpleFileFilter1 = Todos los diseños de cohete(*.ork; *.rkt) +BasicFrame.SimpleFileFilter2 = Diseños OpenRocket (*.ork) +BasicFrame.SimpleFileFilter3 = Diseños RockSim (*.rkt) +BasicFrame.tab.Rocketdesign = Diseños de cohete +BasicFrame.tab.Flightsim = Simulaciones de vuelo +BasicFrame.title.Addnewcomp = Añadir un nuevo componente +BasicFrame.item.Openrocketdesign = Abrir un diseño de cohete +BasicFrame.item.Openexamplerocketdesign = Abrir un ejemplo de diseño de cohete +BasicFrame.item.SavecurRocketdesign = Guardar el diseño actual +BasicFrame.item.SavecurRocketdesnewfile = Guardar el diseño actual como un nuevo documento +BasicFrame.item.Printpart = Imprimir un listado de componentes y un esquema de aleta +BasicFrame.item.Closedesign = Cerrar el diseño actual +BasicFrame.item.Quitprogram = Abandonar el programa +BasicFrame.menu.Rocketedt = Mostrando el cohete +BasicFrame.dlg.lbl1 = Diseño +BasicFrame.dlg.lbl2 = No se ha guardado +BasicFrame.dlg.lbl3 = ¿Quiere guardarlo? +BasicFrame.dlg.title = Diseño no guardado +BasicFrame.StageName.Sustainer = Sustainer +BasicFrame.WarningDialog.txt1 = The following problems were encountered while opening +BasicFrame.WarningDialog.txt2 = Some design features may not have been loaded correctly. +BasicFrame.WarningDialog.title = Warnings while opening file ! Labels used in buttons of dialog windows button.ok = OK @@ -88,6 +95,15 @@ bugreport.dlg.but.Sendbugreport.Ttip = Enviar autom bugreport.dlg.successmsg1 = Report de error enviado con éxito bugreport.dlg.successmsg2 = Gracias por ayudar a mejorar Open Rocket ! bugreport.dlg.successmsg3 = Report de error enviado +bugreport.dlg.connectedInternet = If connected to the Internet, you can simply click Send bug report. +bugreport.dlg.otherwise = Otherwise, send the text below to the address: +bugreport.lbl.Theinformation = The information above may be included in a public bug report. Make sure it does not contain any sensitive information you do not want to be made public. +bugreport.dlg.failedmsg1 = OpenRocket was unable to send the bug report: +bugreport.dlg.failedmsg2 = Please send the report manually to +bugreport.dlg.failedmsg3 = Error sending report +bugreport.reportDialog.txt = You can report a bug in OpenRocket by filling in and submitting the form below.
You can also report bugs and include attachments on the project web site. +bugreport.reportDialog.txt2 = Please include a short description about what you were doing when the exception occurred. + ! Debug log dialog debuglogdlg.but.clear = Limpiar @@ -117,6 +133,10 @@ edtmotorconfdlg.lbl.Leavenamedefault = Dejar vac ! Example design dialog exdesigndlg.but.open = Abrir +exdesigndlg.lbl.Selectexample = Select example designs to open: +exdesigndlg.lbl.Openexampledesign = Open example design +exdesigndlg.lbl.Exampledesignsnotfound = Example designs could not be found. +exdesigndlg.lbl.Examplesnotfound = Examples not found ! Print panel dialog printdlg.but.saveaspdf = Guardar como PDF @@ -133,18 +153,18 @@ matedtpan.col.Type = Tipo matedtpan.col.Density = Densidad matedtpan.col.but.ttip.New = Añadir un nuevo material matedtpan.title.Addcustmaterial = Añadir un material hecho en casa -matedtpan.but.ttip.edit = Edit an existing material -matedtpan.title.Editmaterial = Edit material -matedtpan.title2.Editmaterial = The built-in materials cannot be modified. -matedtpan.but.ttip.delete = Delete a user-defined material -matedtpan.but.ttip.revertall = Delete all user-defined materials -matedtpan.title.Deletealluser-defined = Delete all user-defined materials? -matedtpan.title.Revertall = Revert all? -matedtpan.lbl.edtmaterials = Editing materials will not affect existing rocket designs. +matedtpan.but.ttip.edit = Editar un material existente +matedtpan.title.Editmaterial = Editar material +matedtpan.title2.Editmaterial = Los materiales construidos no se pueden modificar +matedtpan.but.ttip.delete = Borrar un material pre definido +matedtpan.but.ttip.revertall = Borrar todos los materiales predefinidos +matedtpan.title.Deletealluser-defined = ¿Borrar todos los materiales predefinidos? +matedtpan.title.Revertall = ¿Revertir todo? +matedtpan.lbl.edtmaterials = Editar materiales que no afectaran los diseños existentes. !MaterialModel -MaterialModel.title.Material = Material -MaterialModel.title.Defcustmat = Define custom material +MaterialModel.title.Material = Meaterial +MaterialModel.title.Defcustmat = Definir material hecho en casa ! Preference dialog @@ -168,7 +188,7 @@ pref.dlg.RASPfiles = Ficheros de motor RASP (*.eng) pref.dlg.RockSimfiles = Ficheros de motor Rocksim (*.rse) pref.dlg.ZIParchives = Archivos ZIP (*.zip) pref.dlg.checkbox.Checkupdates = Comprobar actualizaciones de software al arrancar -pref.dlg.ttip.Checkupdatesnow = = Comprobar actualizaciones de software ahora +pref.dlg.ttip.Checkupdatesnow = Comprobar actualizaciones de software ahora pref.dlg.lbl.Selectprefunits = Seleccione sus unidades preferidas: pref.dlg.lbl.Rocketdimensions = Dimensiones del cohete: pref.dlg.lbl.Linedensity = Densidad: @@ -195,73 +215,88 @@ pref.dlg.lbl.msg1 = Ocurri pref.dlg.lbl.msg2 = Incapaz de recuperar la información de las actualizaciones pref.dlg.lbl.msg3 = Usted está utilizando la última versión de Open Rocket. pref.dlg.lbl.msg4 = No hay actualizaciones disponibles +pref.dlg.PrefChoiseSelector1 = Always ask +pref.dlg.PrefChoiseSelector2 = Insert in middle +pref.dlg.PrefChoiseSelector3 = Add to end +pref.dlg.PrefBooleanSelector1 = Delete +pref.dlg.PrefBooleanSelector2 = Confirm +pref.dlg.Add = Add +pref.dlg.DescriptionArea.Adddirectories = Add directories, RASP motor files (*.eng), RockSim engine files (*.rse) or ZIP archives separated by a semicolon (;) to load external thrust curves. Changes will take effect the next time you start OpenRocket. + ! Simulation edit dialog simedtdlg.but.runsimulation = Lanzar la simulación simedtdlg.but.resettodefault = Restaurar por defecto simedtdlg.but.add = Agregar simedtdlg.but.remove = Quitar -simedtdlg.title.Editsim = Edit simulation -simedtdlg.lbl.Simname = Simulation name: -simedtdlg.tab.Launchcond = Launch conditions -simedtdlg.tab.Simopt = Simulation options -simedtdlg.tab.Plotdata = Plot data -simedtdlg.tab.Exportdata = Export data -simedtdlg.lbl.Motorcfg = Motor configuration: -simedtdlg.lbl.ttip.Motorcfg = Select the motor configuration to use. -simedtdlg.combo.ttip.motorconf = Select the motor configuration to use. -simedtdlg.lbl.Wind = Wind -simedtdlg.lbl.Averwindspeed = Average windspeed: -simedtdlg.lbl.ttip.Averwindspeed = The average windspeed relative to the ground. -simedtdlg.lbl.Stddeviation = Standard deviation: -simedtdlg.lbl.ttip.Stddeviation = The standard deviation of the windspeed.
The windspeed is within twice the standard deviation from the average for 95% of the time. -simedtdlg.lbl.Turbulenceintensity = Turbulence intensity: -simedtdlg.lbl.ttip.Turbulenceintensity1 = The turbulence intensity is the standard deviation divided by the average windspeed.
-simedtdlg.lbl.ttip.Turbulenceintensity2 = Typical values range from -simedtdlg.lbl.ttip.Turbulenceintensity3 = to -simedtdlg.border.Atmoscond = Atmospheric conditions -simedtdlg.checkbox.InterStdAtmosphere = Use International Standard Atmosphere -simedtdlg.checkbox.ttip.InterStdAtmosphere1 = Select to use the International Standard Atmosphere model.
This model has a temperature of -simedtdlg.checkbox.ttip.InterStdAtmosphere2 = and a pressure of -simedtdlg.checkbox.ttip.InterStdAtmosphere3 = at sea level. -simedtdlg.lbl.Temperature = Temperature: -simedtdlg.lbl.ttip.Temperature = The temperature at the launch site. -simedtdlg.lbl.Pressure = Pressure: -simedtdlg.lbl.ttip.Pressure = The atmospheric pressure at the launch site. -simedtdlg.lbl.Launchsite = Launch site -simedtdlg.lbl.Latitude = Latitude: -simedtdlg.lbl.ttip.Latitude = The launch site latitude affects the gravitational pull of Earth.
Positive values are on the Northern hemisphere, negative values on the Southern hemisphere. -simedtdlg.lbl.Altitude = Altitude: -simedtdlg.lbl.ttip.Altitude = The launch altitude above mean sea level.
This affects the position of the rocket in the atmospheric model. -simedtdlg.border.Launchrod = Launch rod -simedtdlg.lbl.Length = Length: -simedtdlg.lbl.ttip.Length = The length of the launch rod. -simedtdlg.lbl.Angle = Angle: -simedtdlg.lbl.ttip.Angle = The angle of the launch rod from vertical. -simedtdlg.lbl.Direction = Direction: +simedtdlg.title.Editsim = Mostrar la simulación +simedtdlg.lbl.Simname = Nombre de la simulación +simedtdlg.tab.Launchcond = Condiciones del lanzamiento +simedtdlg.tab.Simopt = Opciones de simulación +simedtdlg.tab.Plotdata = Datos del plotter +simedtdlg.tab.Exportdata = Exportar datos +simedtdlg.lbl.Motorcfg = Configuración del motor: +simedtdlg.lbl.ttip.Motorcfg = Seleccionar la configuración del motor a usar +simedtdlg.combo.ttip.motorconf = Seleccionar la configuración del motor a usar +simedtdlg.lbl.Wind = Viento +simedtdlg.lbl.Averwindspeed = Velocidad media del viento +simedtdlg.lbl.ttip.Averwindspeed = Velocidad media del viento en relación al suelo +simedtdlg.lbl.Stddeviation = Desviación standard +simedtdlg.lbl.ttip.Stddeviation = Desviación standard de la velocidad del viento.
La velocidad del viento se encuentra dentro del doble de la desviación media en un 95% del tiempo. +simedtdlg.lbl.Turbulenceintensity = Intensidad de la turbulencia +simedtdlg.lbl.ttip.Turbulenceintensity1 = La intensidad de la turbulencia es la desviación standard dividida por la velocidad media del viento.
+simedtdlg.lbl.ttip.Turbulenceintensity2 = Valores típicos en el campo +simedtdlg.lbl.ttip.Turbulenceintensity3 = a +simedtdlg.border.Atmoscond = Condiciones atmosféricas +simedtdlg.checkbox.InterStdAtmosphere = Usa los patrones de Atmosfera Internacional +simedtdlg.checkbox.ttip.InterStdAtmosphere1 = Seleccionar usar el modelo de la International Standard Atmosphere model.
Este modelo tiene una temperatura de +simedtdlg.checkbox.ttip.InterStdAtmosphere2 = Y una presión de +simedtdlg.checkbox.ttip.InterStdAtmosphere3 = A nivel del mar +simedtdlg.lbl.Temperature = Temperatura: +simedtdlg.lbl.ttip.Temperature = Temperatura en el lugar del lanzamiento. +simedtdlg.lbl.Pressure = Presión: +simedtdlg.lbl.ttip.Pressure = Presión atmosférica en el lugar del lanzamiento +simedtdlg.lbl.Launchsite = Lugar del lanzamiento +simedtdlg.lbl.Latitude = Latitud: +simedtdlg.lbl.ttip.Latitude = La latitud del lugar de lanzamiento afecta la atracción terrestre.
Los valores positivos se dan en el hemisferio Norte, los negativos en el hemisferio Sur. +simedtdlg.lbl.Altitude = Altitud: +simedtdlg.lbl.ttip.Altitude = Los valores por encima del nivel del mar.
Esto afecta la posición del modelo atmosférico. +simedtdlg.border.Launchrod = Varilla para lanzar +simedtdlg.lbl.Length = Longitud: +simedtdlg.lbl.ttip.Length = Longitud de la varilla de lanzamiento +simedtdlg.lbl.Angle = Ángulo: +simedtdlg.lbl.ttip.Angle = El ángulo de la varilla de lanzamiento con la vertical. +simedtdlg.lbl.Direction = Dirección: simedtdlg.lbl.ttip.Direction1 = Direction of the launch rod relative to the wind.
-simedtdlg.lbl.ttip.Direction2 = = towards the wind, -simedtdlg.lbl.ttip.Direction3 = = downwind. -simedtdlg.border.Simopt = Simulator options -simedtdlg.lbl.Calcmethod = Calculation method: -simedtdlg.lbl.ttip.Calcmethod = The Extended Barrowman method calculates aerodynamic forces according
to the Barrowman equations extended to accommodate more components. -simedtdlg.lbl.ExtBarrowman = Extended Barrowman -simedtdlg.lbl.Simmethod = Simulation method: -simedtdlg.lbl.ttip.Simmethod1 = The six degree-of-freedom simulator allows the rocket total freedom during flight.
-simedtdlg.lbl.ttip.Simmethod2 = Integration is performed using a 4th order Runge-Kutta 4 numerical integration. -simedtdlg.lbl.Timestep = Time step: -simedtdlg.lbl.ttip.Timestep1 = The time between simulation steps.
A smaller time step results in a more accurate but slower simulation.
-simedtdlg.lbl.ttip.Timestep2 = The 4th order simulation method is quite accurate with a time step of -simedtdlg.but.ttip.resettodefault = Reset the time step to its default value ( -simedtdlg.border.Simlist = Simulator listeners -simedtdlg.txt.longA1 = Simulation listeners is an advanced feature that allows user-written code to listen to and interact with the simulation. -simedtdlg.txt.longA2 = For details on writing simulation listeners, see the OpenRocket technical documentation. -simedtdlg.lbl.Curlist = Current listeners: -simedtdlg.lbl.Addsimlist = Add simulation listener -simedtdlg.lbl.Noflightdata = No flight data available. -simedtdlg.lbl.runsimfirst = Please run the simulation first. -simedtdlg.chart.Simflight = Simulated flight -simedtdlg.dlg.Simres = Simulation results +simedtdlg.lbl.ttip.Direction2 = Hacia el viento +simedtdlg.lbl.ttip.Direction3 = A Favor del viento +simedtdlg.border.Simopt = Opciones del simulador +simedtdlg.lbl.Calcmethod = Método de cálculo +simedtdlg.lbl.ttip.Calcmethod = El extendido método Barrowman calcula las fuerzas aerodinámicas
Para las ecuaciones Barrowman extendidas para recibir mas componentes. +simedtdlg.lbl.ExtBarrowman = Barrowman Extendido +simedtdlg.lbl.Simmethod = Método de simulación: +simedtdlg.lbl.ttip.Simmethod1 = El simulador de seis grados de libertad permite al cohete una total libertad durante el vuelo.
+simedtdlg.lbl.ttip.Simmethod2 = La integración mejora usando un 4th ordenar Runge-Kutta 4 integración numérica. +simedtdlg.lbl.Timestep = Duración de la etapa +simedtdlg.lbl.ttip.Timestep1 = Tiempo entre etapas de simulación.
Un tiempo mas corto de etapa origina una simulación mas exacta pero mas lenta.
+simedtdlg.lbl.ttip.Timestep2 = The 4th ordenar el método de simulación es bastante preciso con un tiempo de etapa de +simedtdlg.but.ttip.resettodefault = Restituir el tiempo de etapa a su valor por defecto ( +simedtdlg.border.Simlist = Oyentes del simulador +simedtdlg.txt.longA1 = Oyentes del simulador es una prestación avanzada que permite al código escrito del usuario oir e interaccionar con la simulación. +simedtdlg.txt.longA2 = Para detalles de esta prestación de los oyentes, vea la documentación técnica del Open Rocket. +simedtdlg.lbl.Curlist = Oyentes actuales +simedtdlg.lbl.Addsimlist = Añadir la audición del simulador +simedtdlg.lbl.Noflightdata = No hay datos disponibles del vuelo. +simedtdlg.lbl.runsimfirst = Por favor accione la simulación primero. +simedtdlg.chart.Simflight = Vuelo simulado +simedtdlg.dlg.Simres = Resultados de la simulación +simedtdlg.IntensityDesc.None = None +simedtdlg.IntensityDesc.Verylow = Very low +simedtdlg.IntensityDesc.Low = Low +simedtdlg.IntensityDesc.Medium = Medium +simedtdlg.IntensityDesc.High = High +simedtdlg.IntensityDesc.Veryhigh = Very high +simedtdlg.IntensityDesc.Extreme = Extreme @@ -271,72 +306,80 @@ simpanel.but.editsimulation = Editar la simulaci simpanel.but.runsimulations = Lanzar las simulaciones simpanel.but.deletesimulations = Borrar las simulaciones simpanel.but.plotexport = Exportar / Plot -simpanel.but.ttip.newsimulation = Add a new simulation -simpanel.but.ttip.editsim = Edit the selected simulation -simpanel.but.ttip.runsimu = Re-run the selected simulations -simpanel.but.ttip.deletesim = Delete the selected simulations -simpanel.checkbox.donotask = Do not ask me again -simpanel.lbl.defpref = You can change the default operation in the preferences. -simpanel.dlg.lbl.DeleteSim1 = Delete the selected simulations? -simpanel.dlg.lbl.DeleteSim2 = This operation cannot be undone. -simpanel.dlg.lbl.DeleteSim3 = Delete simulations -simpanel.col.Name = Name -simpanel.col.Motors = Motors -simpanel.col.Apogee = Apogee -simpanel.col.Maxvelocity = Max. velocity -simpanel.col.Maxacceleration = Max. acceleration -simpanel.col.Timetoapogee = Time to apogee -simpanel.col.Flighttime = Flight time +simpanel.but.ttip.newsimulation = Añadir una nueva simulación +simpanel.but.ttip.editsim = Mostrar la simulación seleccionada +simpanel.but.ttip.runsimu = Accionar de nuevo las simulaciones seleccionadas +simpanel.but.ttip.deletesim = Borrar las simulaciones seleccionadas +simpanel.checkbox.donotask = No preguntarme de nuevo +simpanel.lbl.defpref = Puede cambiar la operación por defecto por las preferencias +simpanel.dlg.lbl.DeleteSim1 = ¿Borrar las simulaciones seleccionadas? +simpanel.dlg.lbl.DeleteSim2 = Esta operación no puede deshacerse. +simpanel.dlg.lbl.DeleteSim3 = Borrar las simulaciones +simpanel.col.Name = Nombre +simpanel.col.Motors = Motores +simpanel.col.Apogee = Apogeo +simpanel.col.Maxvelocity = Velocidad máxima +simpanel.col.Maxacceleration = Aceleración máxima +simpanel.col.Timetoapogee = Tiempo hasta el apogeo +simpanel.col.Flighttime = Duración del vuelo simpanel.col.Groundhitvelocity = Ground hit velocity ! SimulationRunDialog -SimuRunDlg.title.RunSim = Running simulations... -SimuRunDlg.lbl.Running = Running ... -SimuRunDlg.lbl.Simutime = Simulation time: -SimuRunDlg.lbl.Altitude = Altitude: -SimuRunDlg.lbl.Velocity = Velocity: -SimuRunDlg.msg.Unabletosim = Unable to simulate: -SimuRunDlg.msg.errorOccurred = An error occurred during the simulation: -SimuRunDlg.msg.AnException1 = An exception occurred during the simulation: -SimuRunDlg.msg.AnException2 = Please report this as a bug along with the details below. -SimuRunDlg.msg.AssertionError1 = A computation error occurred during the simulation. -SimuRunDlg.msg.AssertionError2 = Please report this as a bug along with the details below. -SimuRunDlg.msg.unknownerror1 = An unknown error was encountered during the simulation. -SimuRunDlg.msg.unknownerror2 = The program may be unstable, you should save all your designs and restart OpenRocket now! +SimuRunDlg.title.RunSim = Accionando simulaciones +SimuRunDlg.lbl.Running = Accionando +SimuRunDlg.lbl.Simutime = Duración de la simulación +SimuRunDlg.lbl.Altitude = Altitud: +SimuRunDlg.lbl.Velocity = Velocidad: +SimuRunDlg.msg.Unabletosim = Incapaz de simular: +SimuRunDlg.msg.errorOccurred = Ha ocurrido un error durante la simulación: +SimuRunDlg.msg.AnException1 = Ha ocurrido una excepción durante la simulación: +SimuRunDlg.msg.AnException2 = Por favor anote esto como un error con todos los detalles debajo. +SimuRunDlg.msg.AssertionError1 = Se ha producido un error informático durante la simulación. +SimuRunDlg.msg.AssertionError2 = Por favor anote esto como un error con todos los detalles debajo. +SimuRunDlg.msg.unknownerror1 = Se ha detectado un error desconocido durante la simulación. +SimuRunDlg.msg.unknownerror2 = The program puede ser inestable, Guarde todos sus diseños y reinicie OpenRocket ahora! ! SimulationExportPanel -SimExpPan.desc = Comma Separated Files (*.csv) -SimExpPan.border.Vartoexport = Variables to export -SimExpPan.but.Selectall = Select all -SimExpPan.but.Selectnone = Select none -SimExpPan.border.Fieldsep = Field separator -SimExpPan.lbl.Fieldsepstr = Field separator string: -SimExpPan.lbl.longA1 = The string used to separate the fields in the exported file.
-SimExpPan.lbl.longA2 = Use ',' for a Comma Separated Values (CSV) file. -SimExpPan.checkbox.Includesimudesc = Include simulation description -SimExpPan.checkbox.ttip.Includesimudesc = Include a comment at the beginning of the file describing the simulation. -SimExpPan.border.Comments = Comments -SimExpPan.checkbox.Includefielddesc = Include field descriptions -SimExpPan.checkbox.ttip.Includefielddesc = Include a comment line with the descriptions of the exported variables. -SimExpPan.checkbox.Incflightevents = Include flight events -SimExpPan.checkbox.ttip.Incflightevents = Include a comment line for every flight event. -SimExpPan.lbl.Commentchar = Comment character: -SimExpPan.lbl.ttip.Commentchar = The character(s) that mark a comment line. -SimExpPan.but.Exporttofile = Export to file... +SimExpPan.desc = Documentos separados por comas (*.csv) +SimExpPan.border.Vartoexport = Variables para exportar +SimExpPan.but.Selectall = Seleccione todo +SimExpPan.but.Selectnone = No seleccione nada +SimExpPan.border.Fieldsep = Separador de campo +SimExpPan.lbl.Fieldsepstr = Barra separador de campo +SimExpPan.lbl.longA1 = Las barras para separar campos en el documento exportado.
+SimExpPan.lbl.longA2 = Use ',' Para valores separados por comas (CSV) file. +SimExpPan.checkbox.Includesimudesc = Incluye descripción de la simulación +SimExpPan.checkbox.ttip.Includesimudesc = Incluye un comentario en el inicio del documento describiendo la simulación. +SimExpPan.border.Comments = Comentarios +SimExpPan.checkbox.Includefielddesc = Incluye descripciones de campo +SimExpPan.checkbox.ttip.Includefielddesc = Incluye una línea de comentario con las descripciones de las variables exportadas. +SimExpPan.checkbox.Incflightevents = Incluye los eventos del vuelo +SimExpPan.checkbox.ttip.Incflightevents = Incluye una linea de comentario para cada evento del vuelo +SimExpPan.lbl.Commentchar = Carácter de comentario +SimExpPan.lbl.ttip.Commentchar = La características(as) que marcan una línea de comentario. +SimExpPan.but.Exporttofile = Exportar al documento... +SimExpPan.Fileexists.desc1 = File \" +SimExpPan.Fileexists.desc2 = \" exists. Overwrite? +SimExpPan.Fileexists.title = File exists +SimExpPan.ExportingVar.desc1 = Exporting 1 variable out of +SimExpPan.ExportingVar.desc2 = Exporting +SimExpPan.ExportingVar.desc3 = variables out of +SimExpPan.Col.Variable = Variable +SimExpPan.Col.Unit = Unit ! MotorPlot -MotorPlot.title.Motorplot = Motor plot -MotorPlot.but.Select = Select -MotorPlot.Chart.Motorthrustcurve = Motor thrust curve -MotorPlot.Chart.Time = Time / s -MotorPlot.Chart.Thrust = Thrust / N -MotorPlot.txt.Designation = Designation: -MotorPlot.txt.Manufacturer = Manufacturer: -MotorPlot.txt.Type = Type: -MotorPlot.txt.Delays = Delays: -MotorPlot.txt.Comment = Comment:\n +MotorPlot.title.Motorplot = Plot del motor +MotorPlot.but.Select = Seleccionar la configuración del motor a usar +MotorPlot.Chart.Motorthrustcurve = Curva de empuje del motor +MotorPlot.Chart.Time = Tiempo / s +MotorPlot.Chart.Thrust = Empuje / N +MotorPlot.txt.Designation = Designación: +MotorPlot.txt.Manufacturer = Fabricante: +MotorPlot.txt.Type = Tipo: +MotorPlot.txt.Delays = Retardos: +MotorPlot.txt.Comment = Comentario:\n @@ -352,10 +395,13 @@ simplotpanel.but.NewYaxisplottype = Nuevo tipo de Eje Y del Plot simplotpanel.but.Plotflight = Trazado del vuelo simplotpanel.lbl.Axis = Ejes: simplotpanel.but.ttip.Removethisplot = Borrar este Plot -simplotpanel.Desc = The data will be plotted in time order even if the X axis type is not time. -simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed. -simplotpanel.OptionPane.lbl2 = Cannot add plot - +simplotpanel.Desc = Los datos según orden de tiempo serán impresos en el eke X si no hay tiempo +simplotpanel.OptionPane.lbl1 = Se permiten un máximo de 15 impresiones +simplotpanel.OptionPane.lbl2 = No puede añadirse el plot +simplotpanel.AUTO_NAME = Auto +simplotpanel.LEFT_NAME = Left +simplotpanel.RIGHT_NAME = Right +simplotpanel.CUSTOM = Custom ! Component add buttons compaddbuttons.Bodycompandfinsets = Componentes del fuselaje y aletas @@ -379,11 +425,11 @@ compaddbuttons.Shockcord = Tirante de suspensi compaddbuttons.Masscomponent = Componente\nmasa compaddbuttons.Donotaskmeagain = No me lo pregunte de nuevo compaddbuttons.Selectcomppos = Seleccionar la posición del componente -compaddbuttons.lbl.Youcanchange = You can change the default operation in the preferences. -compaddbuttons.lbl.insertcomp = Insert the component after the current component or as the last component? -compaddbuttons.askPosition.Inserthere = Insert here -compaddbuttons.askPosition.Addtotheend = Add to the end -compaddbuttons.askPosition.Cancel = Cancel +compaddbuttons.lbl.Youcanchange = Puede cambiar la operación en las preferencias por defecto +compaddbuttons.lbl.insertcomp = ¿Inserta el componente despues del actual o como último? +compaddbuttons.askPosition.Inserthere = Inserte aquí +compaddbuttons.askPosition.Addtotheend = Añadir al final +compaddbuttons.askPosition.Cancel = Borrar ! Component Analysis Dialog componentanalysisdlg.componentanalysis = Análisis del componente @@ -415,7 +461,7 @@ componentanalysisdlg.println.closingmethod = Llamado m componentanalysisdlg.println.settingnam = SETTING NAN VALUES componentanalysisdlg.lbl.reflenght = Longitud de referencia: componentanalysisdlg.lbl.refarea = Área de referencia: -!componentanalysisdlg.But.close = Cerrar +!componentanalysisdlg.But.close =Close ! Custom Material dialog custmatdlg.title.Custommaterial = Material hecho en casa @@ -440,6 +486,9 @@ ringcompcfg.Radialdirection = Radial direction ringcompcfg.radialdirectionfrom = En dirección radial desde la línea central del cohete ringcompcfg.but.Reset = Reiniciar ringcompcfg.but.Resetcomponant = Resituar el componente a la línea central del cohete +ringcompcfg.EngineBlock.desc = An engine block stops the motor from moving forwards in the motor mount tube.

In order to add a motor, create a body tube or inner tube and mark it as a motor mount in the Motor tab. +ringcompcfg.note.desc = Note: An inner tube will not affect the aerodynamics of the rocket even if it is located outside of the body tube. + ! Body Tube Config BodyTubecfg.lbl.Bodytubelength = Longitud del tubo del fuselaje: @@ -674,10 +723,10 @@ ParachuteCfg.tab.Radialpos = Posici ParachuteCfg.tab.ttip.Radialpos = Configuración de la posición radial ParachuteCfg.lbl.Radialdistance = Distancia radial: ParachuteCfg.lbl.Radialdirection = Dirección radial: -ParachuteCfg.but.Reset = Reiniciar +ParachuteCfg.but.Reset = Reset ! ShockCordConfig -ShockCordCfg.lbl.Shockcordlength = Longitud del tirante de suspensión +ShockCordCfg.lbl.Shockcordlength = Shock cord length ShockCordCfg.lbl.Shockcordmaterial = Material del tirante de suspensión: ShockCordCfg.lbl.Posrelativeto = Posición relativa a: ShockCordCfg.lbl.plus = plus @@ -764,68 +813,370 @@ TrapezoidFinSetCfg.tab.General = General TrapezoidFinSetCfg.tab.Generalproperties = Propiedades generales !MotorConfigurationModel -MotorCfgModel.Editcfg = Edit configurations +MotorCfgModel.Editcfg = Editar configuraciones ! StorageOptionChooser -StorageOptChooser.lbl.Simdatatostore = Simulated data to store: -StorageOptChooser.rdbut.Allsimdata = All simulated data -StorageOptChooser.lbl.longA1 = Store all simulated data.
-StorageOptChooser.lbl.longA2 = This can result in very large files! -StorageOptChooser.rdbut.Every = Every -StorageOptChooser.lbl.longB1 = Store plottable values approximately this far apart.
-StorageOptChooser.lbl.longB2 = Larger values result in smaller files. -StorageOptChooser.lbl.seconds = seconds -StorageOptChooser.rdbut.Onlyprimfig = Only primary figures -StorageOptChooser.lbl.longC1 = Store only the values shown in the summary table.
-StorageOptChooser.lbl.longC2 = This results in the smallest files. -StorageOptChooser.checkbox.Compfile = Compress file -StorageOptChooser.lbl.UsingComp = Using compression reduces the file size significantly. -StorageOptChooser.lbl.longD1 = An estimate on how large the resulting file would be with the present options. -StorageOptChooser.ttip.Saveopt = Save options -StorageOptChooser.lbl.Estfilesize = Estimated file size: -StorageOptChooser.lbl.Saveopt = Save options +StorageOptChooser.lbl.Simdatatostore = Almacenar datos simulados +StorageOptChooser.rdbut.Allsimdata = Todos los datos simulados +StorageOptChooser.lbl.longA1 = Almacenar todos los datos simulados.
+StorageOptChooser.lbl.longA2 = Puede significar archivos muy grandes +StorageOptChooser.rdbut.Every = Cada +StorageOptChooser.lbl.longB1 = Almacenar valores de impresión aproximadamente este lejano apartado.
+StorageOptChooser.lbl.longB2 = Resultados de valores grandes en archivos mas pequeños. +StorageOptChooser.lbl.seconds = Segundos +StorageOptChooser.rdbut.Onlyprimfig = Solamente figuras primarios +StorageOptChooser.lbl.longC1 = Almacenas sólo los valores en la tabla sumario.
+StorageOptChooser.lbl.longC2 = Estos resultados en los archivos mas pequeños. +StorageOptChooser.checkbox.Compfile = Archivo comprimido +StorageOptChooser.lbl.UsingComp = Usando la compresión reducimos el tamaño de los archivos. +StorageOptChooser.lbl.longD1 = Una estimación de cuan grande será un archivo podría tenerse con las presentes opciones. +StorageOptChooser.ttip.Saveopt = Guardar opciones +StorageOptChooser.lbl.Estfilesize = Estimación del tamaño del archivo: +StorageOptChooser.lbl.Saveopt = Guardar opciones ! ThrustCurveMotorSelectionPanel -TCMotorSelPan.lbl.Selrocketmotor = Select rocket motor: -TCMotorSelPan.checkbox.hideSimilar = Hide very similar thrust curves +TCMotorSelPan.lbl.Selrocketmotor = Selecciones el motor del cohete: +TCMotorSelPan.checkbox.hideSimilar = Borrar las curvas muy similares +TCMotorSelPan.SHOW_DESCRIPTIONS.desc1 = Show all motors +TCMotorSelPan.SHOW_DESCRIPTIONS.desc2 = Show motors with diameter less than that of the motor mount +TCMotorSelPan.SHOW_DESCRIPTIONS.desc3 = Show motors with diameter equal to that of the motor mount +TCMotorSelPan.lbl.Motormountdia = Motor mount diameter: +TCMotorSelPan.lbl.Search = Search: +TCMotorSelPan.lbl.Selectthrustcurve = Select thrust curve: +TCMotorSelPan.lbl.Ejectionchargedelay = Ejection charge delay: +TCMotorSelPan.equalsIgnoreCase.None = None +TCMotorSelPan.lbl.NumberofsecondsorNone = (Number of seconds or \"None\") +TCMotorSelPan.lbl.Totalimpulse = Total impulse: +TCMotorSelPan.lbl.Avgthrust = Avg. thrust: +TCMotorSelPan.lbl.Maxthrust = Max. thrust: +TCMotorSelPan.lbl.Burntime = Burn time: +TCMotorSelPan.lbl.Launchmass = Launch mass: +TCMotorSelPan.lbl.Emptymass = Empty mass: +TCMotorSelPan.lbl.Datapoints = Data points: +TCMotorSelPan.lbl.Digest = Digest: +TCMotorSelPan.title.Thrustcurve = Thrust curve: +TCMotorSelPan.title.Thrust = Thrust +TCMotorSelPan.delayBox.None = None + ! PlotDialog -PlotDialog.title.Flightdataplot = Flight data plot -PlotDialog.Chart.Simulatedflight = Simulated flight -PlotDialog.CheckBox.Showdatapoints = Show data points -PlotDialog.lbl.Chart = Click+drag down+right to zoom in, up+left to zoom out +PlotDialog.title.Flightdataplot = Representar los datos de vuelo +PlotDialog.Chart.Simulatedflight = Vuelo simulado +PlotDialog.CheckBox.Showdatapoints = Mostrar los puntos datos +PlotDialog.lbl.Chart = Click+bajar el rozamiento+derecha ampliar, arriba+izquierda disminuir ! "main" prefix is used for the main application dialog -main.menu.file = File -main.menu.file.new = New -main.menu.file.open = Open... -main.menu.file.openExample = Open example... -main.menu.file.save = Save -main.menu.file.saveAs = Save as... -main.menu.file.print = Print... -main.menu.file.close = Close -main.menu.file.quit = Quit - -main.menu.edit = Edit -main.menu.edit.undo = Undo -main.menu.edit.redo = Redo -main.menu.edit.cut = Cut -main.menu.edit.copy = Copy -main.menu.edit.paste = Paste -main.menu.edit.delete = Delete -main.menu.edit.preferences = Preferences - -main.menu.analyze = Analyze -main.menu.analyze.componentAnalysis = Component analysis - -main.menu.help = Help -main.menu.help.license = License -main.menu.help.bugReport = Bug report -main.menu.help.debugLog = Debug log -main.menu.help.about = About - -main.menu.debug = Debug -main.menu.debug.whatisthismenu = What is this menu? -main.menu.debug.createtestrocket = Create test rocket +main.menu.file = Archivo +main.menu.file.new = Nuevo +main.menu.file.open = Abrir... +main.menu.file.openExample = Abrir ejemplo... +main.menu.file.save = Guardar +main.menu.file.saveAs = Guardar como... +main.menu.file.print = Imprimir... +main.menu.file.close = Cerrar +main.menu.file.quit = Silenciar + +main.menu.edit = Representar +main.menu.edit.undo = Invertir +main.menu.edit.redo = Rehacer +main.menu.edit.cut = Cortar +main.menu.edit.copy = Copiar +main.menu.edit.paste = Pegar +main.menu.edit.delete = Borrar +main.menu.edit.preferences = Preferencias + +main.menu.analyze = Analizar +main.menu.analyze.componentAnalysis = Análisis de componentes + +main.menu.help = Ayuda +main.menu.help.license = Licencia +main.menu.help.bugReport = Report de supresiones +main.menu.help.debugLog = Registro de recuperaciones +main.menu.help.about = Acerca de + +main.menu.debug = Recuperación +main.menu.debug.whatisthismenu = ¿Que es este menú? +main.menu.debug.createtestrocket = Crear prueba de modelo + +! database +! Translate here all material database +! + +! Material database +! BULK_MATERIAL +Databases.materials.Acrylic = Acrylic +Databases.materials.Balsa = Balsa +Databases.materials.Birch = Birch +Databases.materials.Cardboard = Cardboard +Databases.materials.Carbonfiber = Carbon fiber +Databases.materials.Cork = Cork +Databases.materials.DepronXPS = Depron (XPS) +Databases.materials.Fiberglass = Fiberglass +Databases.materials.Kraftphenolic = Kraft phenolic +Databases.materials.Maple = Maple +Databases.materials.Paperoffice = Paper (office) +Databases.materials.Pine = Pine +Databases.materials.Plywoodbirch = Plywood (birch) +Databases.materials.PolycarbonateLexan = Polycarbonate (Lexan) +Databases.materials.Polystyrene = Polystyrene +Databases.materials.PVC = PVC +Databases.materials.Spruce = Spruce +Databases.materials.StyrofoamgenericEPS = Styrofoam (generic EPS) +Databases.materials.StyrofoamBluefoamXPS = Styrofoam \"Blue foam\" (XPS) +Databases.materials.Quantumtubing = Quantum tubing +!SURFACE_MATERIAL +Databases.materials.Ripstopnylon = Ripstop nylon +Databases.materials.Mylar = Mylar +Databases.materials.Polyethylenethin = Polyethylene (thin) +Databases.materials.Polyethyleneheavy = Polyethylene (heavy) +Databases.materials.Silk = Silk +Databases.materials.Paperoffice = Paper (office) +Databases.materials.Cellophane = Cellophane +Databases.materials.Creape paper = Cr\u00eape paper +! LINE_MATERIAL +Databases.materials.Threadheavy-duty = Thread (heavy-duty) +Databases.materials.Elasticcordround2mm = Elastic cord (round 2mm, 1/16 in) +Databases.materials.Elasticcordflat6mm = Elastic cord (flat 6mm, 1/4 in) +Databases.materials.Elasticcordflat12mm = Elastic cord (flat 12mm, 1/2 in) +Databases.materials.Elasticcordflat19mm = Elastic cord (flat 19mm, 3/4 in) +Databases.materials.Elasticcordflat25mm = Elastic cord (flat 25mm, 1 in) +Databases.materials.Braidednylon2mm = Braided nylon (2 mm, 1/16 in) +Databases.materials.Braidednylon3mm = Braided nylon (3 mm, 1/8 in) +Databases.materials.Tubularnylon11mm = Tubular nylon (11 mm, 7/16 in) +Databases.materials.Tubularnylon14mm = Tubular nylon (14 mm, 9/16 in) +Databases.materials.Tubularnylon25mm = Tubular nylon (25 mm, 1 in) + +! ExternalComponent +ExternalComponent.Rough = Rough +ExternalComponent.Unfinished = Unfinished +ExternalComponent.Regularpaint = Regular paint +ExternalComponent.Smoothpaint = Smooth paint +ExternalComponent.Polished = Polished + +! LineStyle +LineStyle.Solid = Solid +LineStyle.Dashed = Dashed +LineStyle.Dotted = Dotted +LineStyle.Dash-dotted = Dash-dotted +LineStyle.Defaultstyle = Default style + +! Shape +Shape.Conical = Conical +Shape.Conical.desc1 = A conical nose cone has a profile of a triangle. +Shape.Conical.desc2 = A conical transition has straight sides. +Shape.Ogive = Ogive +Shape.Ogive.desc1 = An ogive nose cone has a profile that is a segment of a circle. The shape parameter value 1 produces a tangent ogive, which has a smooth transition to the body tube, values less than 1 produce secant ogives. +Shape.Ogive.desc2 = An ogive transition has a profile that is a segment of a circle. The shape parameter value 1 produces a tangent ogive, which has a smooth transition to the body tube at the aft end, values less than 1 produce secant ogives. +Shape.Ellipsoid = Ellipsoid +Shape.Ellipsoid.desc1 = An ellipsoidal nose cone has a profile of a half-ellipse with major axes of lengths 2×Length and Diameter. +Shape.Ellipsoid.desc2 = An ellipsoidal transition has a profile of a half-ellipse with major axes of lengths 2×Length and Diameter. If the transition is not clipped, then the profile is extended at the center by the corresponding radius. +Shape.Powerseries = Power series +Shape.Powerseries.descA1 = A power series nose cone has a profile of Radius × (x / Length)k where k is the shape parameter. For k=0.5 this is a +Shape.Powerseries.descA2 = -power or parabolic nose cone, for k=0.75 a +Shape.Powerseries.descA3 = -power, and for k=1 a conical nose cone. +Shape.Powerseries.descB1 = A power series transition has a profile of Radius × (x / Length)k where k is the shape parameter. For k=0.5 the transition is +Shape.Powerseries.descB2 = -power or parabolic, for k=0.75 a +Shape.Powerseries.descB3 = -power, and for k=1 conical. +Shape.Parabolicseries = Parabolic series +Shape.Parabolicseries.desc1 = A parabolic series nose cone has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a full parabola which is tangent to the body tube, 0.75 produces a 3/4 parabola, 0.5 procudes a 1/2 parabola and 0 produces a conical nose cone. +Shape.Parabolicseries.desc2 = A parabolic series transition has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a full parabola which is tangent to the body tube at the aft end, 0.75 produces a 3/4 parabola, 0.5 procudes a 1/2 parabola and 0 produces a conical transition. +Shape.Haackseries = Haack series +Shape.Haackseries.desc1 = The Haack series nose cones are designed to minimize drag. The shape parameter 0 produces an LD-Haack or Von Karman nose cone, which minimizes drag for fixed length and diameter, while a value of 0.333 produces an LV-Haack nose cone, which minimizes drag for fixed length and volume. +Shape.Haackseries.desc2 = The Haack series nose cones are designed to minimize drag. These transition shapes are their equivalents, but do not necessarily produce optimal drag for transitions. The shape parameter 0 produces an LD-Haack or Von Karman shape, while a value of 0.333 produces an LV-Haack shape. + + +! RocketComponent +RocketComponent.Position.TOP = Top of the parent component +RocketComponent.Position.MIDDLE = Middle of the parent component +RocketComponent.Position.BOTTOM = Bottom of the parent component +RocketComponent.Position.AFTER = After the parent component +RocketComponent.Position.ABSOLUTE = Tip of the nose cone + +! LaunchLug +LaunchLug.Launchlug = Launch lug +! NoseCone +NoseCone.NoseCone = Nose cone +! Transition +Transition.Transition = Transition +!Stage +Stage.Stage = Stage +! BodyTube +BodyTube.BodyTube = Body tube +! TubeCoupler +TubeCoupler.TubeCoupler = Tube coupler +!InnerTube +InnerTube.InnerTube = Inner Tube +! TrapezoidFinSet +TrapezoidFinSet.TrapezoidFinSet = Trapezoidal fin set +! FreeformFinSet +FreeformFinSet.FreeformFinSet = Freeform fin set +!MassComponent +MassComponent.MassComponent = Mass component +! Parachute +Parachute.Parachute = Parachute +! ShockCord +ShockCord.ShockCord = Shock cord +! Bulkhead +Bulkhead.Bulkhead = Bulkhead + +!Rocket +Rocket.motorCount.Nomotor = [No motors] +Rocket.compname.Rocket = Rocket + +!MotorMount +MotorMount.IgnitionEvent.AUTOMATIC = Automatic (launch or ejection charge) +MotorMount.IgnitionEvent.LAUNCH = Launch +MotorMount.IgnitionEvent.EJECTION_CHARGE = First ejection charge of previous stage +MotorMount.IgnitionEvent.BURNOUT = First burnout of previous stage +MotorMount.IgnitionEvent.NEVER = Never + +!ComponentIcons +ComponentIcons.Nosecone = Nose cone +ComponentIcons.Bodytube = Body tube +ComponentIcons.Transition = Transition +ComponentIcons.Trapezoidalfinset = Trapezoidal fin set +ComponentIcons.Ellipticalfinset = Elliptical fin set +ComponentIcons.Freeformfinset = Freeform fin set +ComponentIcons.Launchlug = Launch lug +ComponentIcons.Innertube = Inner tube +ComponentIcons.Tubecoupler = Tube coupler +ComponentIcons.Centeringring = Centering ring +ComponentIcons.Bulkhead = Bulk head +ComponentIcons.Engineblock = Engine block +ComponentIcons.Parachute = Parachute +ComponentIcons.Streamer = Streamer +ComponentIcons.Shockcord = Shock cord +ComponentIcons.Masscomponent = Mass component +ComponentIcons.disabled = (disabled) + +! StageAction +StageAction.Stage = Stage + +! RecoveryDevice +RecoveryDevice.DeployEvent.LAUNCH = Launch (plus NN seconds) +RecoveryDevice.DeployEvent.EJECTION = First ejection charge of this stage +RecoveryDevice.DeployEvent.APOGEE = Apogee +RecoveryDevice.DeployEvent.ALTITUDE = Specific altitude during descent +RecoveryDevice.DeployEvent.NEVER = Never + +! FlightEvent +FlightEvent.Type.LAUNCH = Launch +FlightEvent.Type.IGNITION = Motor ignition +FlightEvent.Type.LIFTOFF = Lift-off +FlightEvent.Type.LAUNCHROD = Launch rod clearance +FlightEvent.Type.BURNOUT = Motor burnout +FlightEvent.Type.EJECTION_CHARGE = Ejection charge +FlightEvent.Type.STAGE_SEPARATION = Stage separation +FlightEvent.Type.APOGEE = Apogee +FlightEvent.Type.RECOVERY_DEVICE_DEPLOYMENT = Recovery device deployment +FlightEvent.Type.GROUND_HIT = Ground hit +FlightEvent.Type.SIMULATION_END = Simulation end +FlightEvent.Type.ALTITUDE = Altitude change + +! ThrustCurveMotorColumns +TCurveMotorCol.MANUFACTURER = Manufacturer +TCurveMotorCol.DESIGNATION = Designation +TCurveMotorCol.TYPE = Type +TCurveMotorCol.DIAMETER = Diameter +TCurveMotorCol.LENGTH = Length + +! RocketInfo +RocketInfo.lengthLine.Length = Length +RocketInfo.lengthLine.maxdiameter = , max. diameter +RocketInfo.massText1 = Mass with motors +RocketInfo.massText2 = Mass with no motors +RocketInfo.at = at M= +RocketInfo.cgText = CG: +RocketInfo.cpText = CP: +RocketInfo.stabText = Stability: +RocketInfo.Warning = Warning: +RocketInfo.Calculating = Calculating... +RocketInfo.Apogee = Apogee: +RocketInfo.Maxvelocity = Max. velocity: +RocketInfo.Maxacceleration = Max. acceleration: +RocketInfo.apogeeValue = N/A +RocketInfo.Mach = (Mach +RocketInfo.velocityValue = N/A +RocketInfo.accelerationValue = N/A + +! FinSet +FinSet.CrossSection.SQUARE = Square +FinSet.CrossSection.ROUNDED = Rounded +FinSet.CrossSection.AIRFOIL = Airfoil +FinSet.TabRelativePosition.FRONT = Root chord leading edge +FinSet.TabRelativePosition.CENTER = Root chord midpoint +FinSet.TabRelativePosition.END = Root chord trailing edge + +! FlightDataType +FlightDataType.TYPE_TIME = Time +FlightDataType.TYPE_ALTITUDE = Altitude +FlightDataType.TYPE_VELOCITY_Z = Vertical velocity +FlightDataType.TYPE_ACCELERATION_Z = Vertical acceleration +FlightDataType.TYPE_VELOCITY_TOTAL = Total velocity +FlightDataType.TYPE_ACCELERATION_TOTAL = Total acceleration +FlightDataType.TYPE_POSITION_X = Position upwind +FlightDataType.TYPE_POSITION_Y = Position parallel to wind +FlightDataType.TYPE_POSITION_XY = Lateral distance +FlightDataType.TYPE_POSITION_DIRECTION = Lateral direction +FlightDataType.TYPE_VELOCITY_XY = Lateral velocity +FlightDataType.TYPE_ACCELERATION_XY = Lateral acceleration +FlightDataType.TYPE_AOA = Angle of attack +FlightDataType.TYPE_ROLL_RATE = Roll rate +FlightDataType.TYPE_PITCH_RATE = Pitch rate +FlightDataType.TYPE_YAW_RATE = Yaw rate +FlightDataType.TYPE_MASS = Mass +FlightDataType.TYPE_LONGITUDINAL_INERTIA = Longitudinal moment of inertia +FlightDataType.TYPE_ROTATIONAL_INERTIA = Rotational moment of inertia +FlightDataType.TYPE_CP_LOCATION = CP location +FlightDataType.TYPE_CG_LOCATION = CG location +FlightDataType.TYPE_STABILITY = Stability margin calibers +FlightDataType.TYPE_MACH_NUMBER = Mach number +FlightDataType.TYPE_REYNOLDS_NUMBER = Reynolds number +FlightDataType.TYPE_THRUST_FORCE = Thrust +FlightDataType.TYPE_DRAG_FORCE = Drag force +FlightDataType.TYPE_DRAG_COEFF = Drag coefficient +FlightDataType.TYPE_AXIAL_DRAG_COEFF = Axial drag coefficient +FlightDataType.TYPE_FRICTION_DRAG_COEFF = Friction drag coefficient +FlightDataType.TYPE_PRESSURE_DRAG_COEFF = Pressure drag coefficient +FlightDataType.TYPE_BASE_DRAG_COEFF = Base drag coefficient +FlightDataType.TYPE_NORMAL_FORCE_COEFF = Normal force coefficient +FlightDataType.TYPE_PITCH_MOMENT_COEFF = Pitch moment coefficient +FlightDataType.TYPE_YAW_MOMENT_COEFF = Yaw moment coefficient +FlightDataType.TYPE_SIDE_FORCE_COEFF = Side force coefficient +FlightDataType.TYPE_ROLL_MOMENT_COEFF = Roll moment coefficient +FlightDataType.TYPE_ROLL_FORCING_COEFF = Roll forcing coefficient +FlightDataType.TYPE_ROLL_DAMPING_COEFF = Roll damping coefficient +FlightDataType.TYPE_PITCH_DAMPING_MOMENT_COEFF = Pitch damping coefficient +FlightDataType.TYPE_YAW_DAMPING_MOMENT_COEFF = Yaw damping coefficient +FlightDataType.TYPE_REFERENCE_LENGTH = Reference lenght +FlightDataType.TYPE_REFERENCE_AREA = Reference area +FlightDataType.TYPE_ORIENTATION_THETA = Vertical orientation (zenith) +FlightDataType.TYPE_ORIENTATION_PHI = Lateral orientation (azimuth) +FlightDataType.TYPE_WIND_VELOCITY = Wind velocity +FlightDataType.TYPE_AIR_TEMPERATURE = Air temperature +FlightDataType.TYPE_AIR_PRESSURE = Air pressure +FlightDataType.TYPE_SPEED_OF_SOUND = Speed of sound +FlightDataType.TYPE_TIME_STEP = Simulation time step +FlightDataType.TYPE_COMPUTATION_TIME = Computation time + +! PlotConfiguration +PlotConfiguration.Verticalmotion = Vertical motion vs. time +PlotConfiguration.Totalmotion = Total motion vs. time +PlotConfiguration.Flightside = Flight side profile +PlotConfiguration.Stability = Stability vs. time +PlotConfiguration.Dragcoef = Drag coefficients vs. Mach number +PlotConfiguration.Rollcharacteristics = Roll characteristics +PlotConfiguration.Angleofattack = Angle of attack and orientation vs. time +PlotConfiguration.Simulationtime = Simulation time step and computation time + +! Warning +Warning.LargeAOA.str1 = Large angle of attack encountered. +Warning.LargeAOA.str2 = Large angle of attack encountered ( +Warning.DISCONTINUITY = Discontinuity in rocket body diameter. +Warning.THICK_FIN = Thick fins may not be modeled accurately. +Warning.JAGGED_EDGED_FIN = Jagged-edged fin predictions may be inaccurate. +Warning.LISTENERS_AFFECTED = Listeners modified the flight simulation +Warning.RECOVERY_DEPLOYMENT_WHILE_BURNING = Recovery device opened while motor still burning. +Warning.FILE_INVALID_PARAMETER = Invalid parameter encountered, ignoring.