From: bela <bela@4a8a32a2-be11-0410-ad9d-d568d2c75423>
Date: Fri, 13 Jul 2001 13:01:51 +0000 (+0000)
Subject: removed canc515c.h
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=b85d689b77e8e83a6ce914b35bc5986bb1432599;p=fw%2Fsdcc

removed canc515c.h


git-svn-id: https://sdcc.svn.sourceforge.net/svnroot/sdcc/trunk/sdcc@1062 4a8a32a2-be11-0410-ad9d-d568d2c75423
---

diff --git a/device/include/canc515c.h b/device/include/canc515c.h
deleted file mode 100644
index c7459eef..00000000
--- a/device/include/canc515c.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*****************************************************************************
-|*
-|*  MODULE:            canc515c.h
-|*
-|*    This file contains definitions for the builtin CAN-Bus Controller of
-|*    the Siemens c515c controller
-|*
-****************************************************************************/
-
-#ifndef _CANC515C_H
-#define _CANC515C_H
-
-/* define CPU_CLK_10MHZ or CPU_CLK_8MHZ to select the right values for */
-/* the bit timing registers */
-
-#define CPU_CLK_10MHZ
-
-/* address of can controller in xmem */
-#define CAN_CTRL	0xf700
-
-/* size of message buffer including 1 dummy byte at end */
-#define CAN_MSG_SZ	0x10
-
-/* register offset definitions */
-#define CR	0
-#define SR	1
-#define IR	2
-
-#define BT_0	4
-#define BT_1	5
-#define GMS_0	6
-#define GMS_1	7
-#define GME_0	8
-#define GME_1	9
-#define GME_2	0xa
-#define GME_3	0xb
-#define MSG15MSK_0	0xc
-#define MSG15MSK_1	0xd
-#define MSG15MSK_2	0xe
-#define MSG15MSK_3	0xf
-
-/* register offsets  in message buffer */
-#define MCR_0	0
-#define MCR_1	1
-#define ARB_0	2
-#define ARB_1	3
-#define ARB_2	4
-#define ARB_3	5
-#define MCFG	6
-/* beginning of message data */
-#define DATA	7
-
-/* bits in cntr_x registers */
-#define MSGVAL	0x80
-#define TXIE	0x20
-#define RXIE	0x8
-#define INTPND	0x2
-#define RMTPND	0x80
-#define TXRQST	0x20
-#define MSGLST	0x8
-#define CPUUPD	0x8
-#define NEWDAT	0x2
-
-/* macros for setting and resetting above bits, see Siemens documentation */
-#define MCR_BIT_SET(p,x) ((p) = (0xff & ~((x) >> 1)))
-#define MCR_BIT_RES(p,x) ((p) = (0xff & ~(x)))
-
-/* direction = transmit in mcfg */
-#define DIR_TRANSMIT	0x8
-
-/* constants for bit timing registers */
-/* 8 MHZ */
-#ifdef CPU_CLK_8MHZ
-#define BT_0_125K	0x3
-#define BT_1_125K	0x1c
-#define BT_0_250K	0x1
-#define BT_1_250K	0x1c
-#define BT_0_500K	0x0
-#define BT_1_500K	0x1c
-#define BT_0_1M		0x0
-#define BT_1_1M		0x14
-#endif
-/* dito, 10 MHZ */
-#ifdef CPU_CLK_10MHZ
-#define BT_0_125K	0x3
-#define BT_1_125K	0x1c
-#define BT_0_250K	0x1
-#define BT_1_250K	0x1c
-#define BT_0_500K	0x0
-#define BT_1_500K	0x2f
-#define BT_0_1M		0x0
-#define BT_1_1M		0x25
-#endif
-
-/* Control register bits */
-
-#define	CINIT	0x1
-#define IE	0x2
-#define SIE	0x4
-#define EIE	0x8
-
-#define CCE	0x40
-
-/* status register bits */
-#define	LEC0	0x1
-#define	LEC1	0x2
-#define	LEC2	0x4
-#define	TXOK	0x8
-#define	RXOK	0x10
-#define	WAKE	0x20
-#define	WARN	0x40
-#define	BOFF	0x80
-
-
-typedef struct can_msg
-{
-    unsigned char mcr_0;
-    unsigned char mcr_1;
-    unsigned char arb_0;
-    unsigned char arb_1;
-    unsigned char arb_2;
-    unsigned char arb_3;
-    unsigned char mcfg;
-    unsigned char data_bytes[8];
-    unsigned char dummy;
-} *can_msgp;
-
-xdata at CAN_CTRL struct
-{
-    unsigned	char	cr;
-    unsigned	char	sr;
-    unsigned	char	ir;
-    unsigned	char	res0;
-    unsigned	char	bt_0;
-    unsigned	char	bt_1;
-    unsigned	char	gms_0;
-    unsigned	char	gme_1;
-    unsigned	char	gme_0;
-    unsigned	char	gme_1;
-    unsigned	char	gme_2;
-    unsigned	char	gme_3;
-    unsigned	char	msg15msk_0;
-    unsigned	char	msg15msk_1;
-    unsigned	char	msg15msk_2;
-    unsigned	char	msg15msk_3;
-    struct	can_msg msgbufs[15];
-} can_ctrl;
-
-#endif /* _CANC515C */