From: Keith Packard <keithp@keithp.com>
Date: Mon, 1 May 2017 00:41:21 +0000 (-0700)
Subject: altos/telegps-v2.0: CC1200 CS is PA1, not PA5.
X-Git-Tag: 1.8~147
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=9a10a209749d1f375d02ce9af68ccbb0b3a91ba2;p=fw%2Faltos

altos/telegps-v2.0: CC1200 CS is PA1, not PA5.

Also remove some unneeded config of an additional pin for MCU wakeup,
which the CC1120 needs but the CC1200 does not.

Signed-off-by: Keith Packard <keithp@keithp.com>
---

diff --git a/src/telegps-v2.0/ao_pins.h b/src/telegps-v2.0/ao_pins.h
index 74f4ff27..87b49934 100644
--- a/src/telegps-v2.0/ao_pins.h
+++ b/src/telegps-v2.0/ao_pins.h
@@ -149,22 +149,17 @@ struct ao_adc {
 
 #define AO_FEC_DEBUG            0
 #define AO_CC1200_SPI_CS_PORT   (&stm_gpioa)
-#define AO_CC1200_SPI_CS_PIN    5
+#define AO_CC1200_SPI_CS_PIN    1
 #define AO_CC1200_SPI_BUS       AO_SPI_1_PA5_PA6_PA7
 #define AO_CC1200_SPI           stm_spi1
 #define AO_CC1200_SPI_SPEED     AO_SPI_SPEED_6MHz
 
 #define AO_CC1200_INT_PORT              (&stm_gpioa)
 #define AO_CC1200_INT_PIN               4
-#define AO_CC1200_MCU_WAKEUP_PORT       (&stm_gpioa)
-#define AO_CC1200_MCU_WAKEUP_PIN        (0)
 
 #define AO_CC1200_INT_GPIO      2
 #define AO_CC1200_INT_GPIO_IOCFG        CC1200_IOCFG2
 
-#define AO_CC1200_MARC_GPIO     3
-#define AO_CC1200_MARC_GPIO_IOCFG       CC1200_IOCFG3
-
 #define HAS_BOOT_RADIO          0
 
 #endif /* _AO_PINS_H_ */