From: Keith Packard <keithp@keithp.com>
Date: Mon, 13 Aug 2012 07:36:22 +0000 (-0700)
Subject: Fix H1 and H2 to match H3
X-Git-Tag: v0.1~1
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=94ef252e059a0834a57b914caa384d91ae985bad;p=hw%2Fmicropeak

Fix H1 and H2 to match H3

Soldermask was too skinny

Signed-off-by: Keith Packard <keithp@keithp.com>
---

diff --git a/micropeak.pcb b/micropeak.pcb
index 20a7983..34098fe 100644
--- a/micropeak.pcb
+++ b/micropeak.pcb
@@ -6,11 +6,11 @@ FileVersion[20070407]
 PCB["MicroPeak" 70000 56000]
 
 Grid[100.0 0 0 0]
-Cursor[70000 28700 0.000000]
+Cursor[5400 5900 0.000000]
 PolyArea[200000000.000000]
 Thermal[0.500000]
 DRC[500 1000 500 500 1500 650]
-Flags("showdrc,nameonpcb,uniquename,clearnew")
+Flags("showdrc,nameonpcb,uniquename,clearnew,showmask")
 Groups("1,c:2,s:3")
 Styles["Signal,1000,3600,2000,1000:Power,2500,6000,3500,1000:Fat,4000,6000,3500,1000:Skinny,600,2402,1181,600"]
 
@@ -847,14 +847,14 @@ Element["onsolder" "bhx1-1025-sm" "B1" "unknown" 35000 30800 -22200 22000 0 100
 
 Element["" "hole-M2.5" "H2" "unknown" 7500 48500 -2800 -3000 0 100 ""]
 (
-	Pin[0 0 11800 2000 12000 9800 "1" "1" "usetherm,thermal(1S)"]
+	Pin[0 0 12000 2000 12600 9800 "1" "1" "usetherm,thermal(1S)"]
 	ElementArc [0 0 7000 7000 0 360 1000]
 
 	)
 
 Element["" "hole-M2.5" "H1" "unknown" 62500 48500 -2500 -3200 0 100 ""]
 (
-	Pin[0 0 11800 2000 12000 9800 "1" "1" "usetherm,thermal(1S)"]
+	Pin[0 0 12000 2000 12600 9800 "1" "1" "usetherm,thermal(1S)"]
 	ElementArc [0 0 7000 7000 0 360 1000]
 
 	)