From: Bdale Garbee <bdale@gag.com>
Date: Sun, 18 May 2025 13:13:59 +0000 (-0400)
Subject: tighten clearance on beeper pins
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=8234ec07c6a3b18e01d4619e2f10a6aa08aca5b5;p=hw%2Ftelemetrum

tighten clearance on beeper pins
---

diff --git a/telemetrum.lht b/telemetrum.lht
index 9de5214..1c05e77 100644
--- a/telemetrum.lht
+++ b/telemetrum.lht
@@ -27894,7 +27894,7 @@ ha:pcb-rnd-board-v8 {
 
           li:objects {
            ha:padstack_ref.122203 {
-            proto=0; x=830.0mil; y=598.42mil; rot=-90.000000; xmirror=1; smirror=1; clearance=19.685mil;
+            proto=0; x=830.0mil; y=598.42mil; rot=-90.000000; xmirror=1; smirror=1; clearance=8.0mil;
             ha:flags {
              clearline=1
             }
@@ -27914,7 +27914,7 @@ ha:pcb-rnd-board-v8 {
             }
            }
            ha:padstack_ref.122204 {
-            proto=1; x=830.0mil; y=401.57mil; rot=-90.000000; xmirror=1; smirror=1; clearance=19.685mil;
+            proto=1; x=830.0mil; y=401.57mil; rot=-90.000000; xmirror=1; smirror=1; clearance=8.0mil;
             ha:flags {
              clearline=1
             }
@@ -29434,7 +29434,7 @@ ha:pcb-rnd-board-v8 {
                 }
               }
 
-              {ha:top copper}     {
+              {ha:top copper}      {
                lid=2
                ha:combining {               }
 
@@ -31692,9 +31692,9 @@ ha:pcb-rnd-board-v8 {
       grids_idx = 1
       grid = 1.00 mil
       ha:view {
-       flip_y = 0
+       flip_y = 1
       }
-       show_solder_side = 0
+       show_solder_side = 1
         all_direction_lines = false
          buffer_number = 0
           show_drc = true