From: Bdale Garbee <bdale@gag.com>
Date: Thu, 27 Apr 2023 19:19:23 +0000 (-0600)
Subject: slight improvement in wording
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=80edd9cab3258d58b08e1512f026f2433c3d0d05;p=web%2Faltusmetrum

slight improvement in wording
---

diff --git a/FAQs/computerconnection.mdwn b/FAQs/computerconnection.mdwn
index 14a49c5..7ca079e 100644
--- a/FAQs/computerconnection.mdwn
+++ b/FAQs/computerconnection.mdwn
@@ -23,8 +23,8 @@ battery voltage and then two "dits" (Morse code I) indicating that it's
 entering idle/interactive mode, followed by the pyro continuity beeps
 one time only.  At that point, you should be able to configure it from our 
 software, etc.  If, instead, you hear 'di dah dah dit' (Morse code P) and 
-the continuity beeps repeat every few seconds, you won't be able to talk to
-the board.
+the continuity beeps repeat every few seconds, the board is in pad mode and
+you won't be able to talk to it.
 
 By FAR the biggest problem we see are folks trying to use micro USB
 cables that don't have all the pins connected.  Apparently, lots of