From: Bdale Garbee Date: Sat, 8 Aug 2009 14:29:57 +0000 (-0600) Subject: freshen provided files and notes to reflect creation of working-v0.1 tag X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=47ea84fccc24057615ffe1092efcd1fcd4fe1de3;p=web%2Faltusmetrum freshen provided files and notes to reflect creation of working-v0.1 tag --- diff --git a/TeleMetrum/index.mdwn b/TeleMetrum/index.mdwn index ce58880..e4f9180 100644 --- a/TeleMetrum/index.mdwn +++ b/TeleMetrum/index.mdwn @@ -104,18 +104,19 @@ simplify things by building a new altimeter with integrated RF link! The hardware design current gEDA files are available from [git.gag.com](http://git.gag.com) in the project -[hw/telemetrum](http://git.gag.com/?p=hw/telemetrum;a=summary). The 'fab' -tag on the master branch reflects -the artwork as sent out for PCB fab. The 'loaded' tag on the master branch -indicates the parts Bdale loads for a functional board, but the schematic -does not reflect the cuts and jumps or added resistors. The 'nextcut' branch +[hw/telemetrum](http://git.gag.com/?p=hw/telemetrum;a=summary). +The 'working-v0.1' tag on the master branch indicates what we're actually +flying right now. The v0.1 PCB artwork, and schematic updated to include +the parts Bdale loads for a functional board including the two cuts and jumps +and two added resistors plus ground leads required as rework. +The 'nextcut' branch is work towards our next PCB revision. The 'ground' branch has a cut-down schematic used to generate the BOM for partially loading boards to use in the matching [TeleTerra](../TeleTerra) ground station design. For those who don't have ready access to the gEDA suite, here are pdf snapshots -of files in more easily readable form. The schematic and BOM are from the -'nextcut' branch as of 20 April 2009, the artwork is of the v0.1 boards: +of files in more easily readable form. These are all as of the working-v0.1 +tag: * [schematic](telemetrum.pdf) * [pcb artwork](telemetrum.pcb.pdf) @@ -141,7 +142,7 @@ Work is underway on a second revision of TeleMetrum with the following changes: * stretch board length by 0.25 inches * adjust USB connector position to be flush with edge of board * eliminate beeper -* eliminate temperature sensor, since baro sensor is already compensated +* eliminate temperature sensor, since baro sensor is already compensated and there's a sensor on the cc1111 * eliminate serial port connector * integrate MN5010HS GPS receiver and chip antenna on-board * change debug connector to 4 pin 1.25mm connector as was used for serial port diff --git a/TeleMetrum/telemetrum.bom b/TeleMetrum/telemetrum.bom index 020d401..f33f110 100644 --- a/TeleMetrum/telemetrum.bom +++ b/TeleMetrum/telemetrum.bom @@ -38,7 +38,7 @@ J2 unknown unknown 530470210 WM1731-ND J3 unknown unknown 530470210 WM1731-ND J4 unknown unknown 282834-6 A98337-ND J5 unknown unknown 548190572 WM17116CT-ND -J6 unknown unknown 530470510 WM1734-ND +J6 unknown unknown 100mil4pin ED7464-ND J7 unknown unknown 530470410 WM1733-ND J8 unknown SMA sma-edge CONSMA003.062-ND L1 INDUCTOR 27nH 0402 490-2628-1-ND @@ -48,12 +48,12 @@ L4 INDUCTOR 27nH 0402 490-2628-1-ND Q1 FD335N unknown SuperSOT3 FDN335NCT-ND Q2 FD335N unknown SuperSOT3 FDN335NCT-ND R10 RESISTOR 5k 0402 311-5.10KLRCT-ND -R11 RESISTOR 10K 0402 RMCF1/16S10K1%RCT-ND +R11 RESISTOR 10k 0402 RMCF1/16S10K1%RCT-ND R12 RESISTOR 270 0402 541-270LCT-ND R13 RESISTOR 270 0402 541-270LCT-ND R14 RESISTOR 100k 0402 311-100KLRCT-ND R15 RESISTOR 100k 0402 311-100KLRCT-ND -R16 RESISTOR 56K 0402 RHM56.0KLCT-ND +R16 RESISTOR 56k 0402 RHM56.0KLCT-ND R17 RESISTOR 2.7k 0402 RHM2.70KLCT-ND R18 RESISTOR 10k 0402 RMCF1/16S10K1%RCT-ND R19 RESISTOR 100 0402 P100JCT-ND @@ -63,9 +63,9 @@ R21 RESISTOR 27k 0402 311-27KJRCT-ND R22 RESISTOR 27k 0402 311-27KJRCT-ND R2 RESISTOR 10k 0402 RMCF1/16S10K1%RCT-ND R3 RESISTOR 10k 0402 RMCF1/16S10K1%RCT-ND -R4 RESISTOR 10K 0402 RMCF1/16S10K1%RCT-ND +R4 RESISTOR 10k 0402 RMCF1/16S10K1%RCT-ND R5 RESISTOR 5k 0402 311-5.10KLRCT-ND -R6 RESISTOR 1.5K 0402 RMCF1/16S1.5K1%RCT-ND +R6 RESISTOR 1.5k 0402 RMCF1/16S1.5K1%RCT-ND R7 RESISTOR 33 0402 RHM33.0LCT-ND R8 RESISTOR 33 0402 RHM33.0LCT-ND R9 RESISTOR 270 0402 541-270LCT-ND diff --git a/TeleMetrum/telemetrum.pdf b/TeleMetrum/telemetrum.pdf index 617f43a..5c1b206 100644 Binary files a/TeleMetrum/telemetrum.pdf and b/TeleMetrum/telemetrum.pdf differ