From: Antonio Borneo <borneo.antonio@gmail.com>
Date: Fri, 21 May 2021 16:01:59 +0000 (+0200)
Subject: tcl: remove remaining deprecated commands
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=30f3a2a650aa2375ab932203091a62d5bb109419;p=fw%2Fopenocd

tcl: remove remaining deprecated commands

There are still few adapter_khz, ftdi_location, jtag_nsrst_delay
and xds110_serial strolling around ...

Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6270
Tested-by: jenkins
---

diff --git a/tcl/board/dp_busblaster_v4.cfg b/tcl/board/dp_busblaster_v4.cfg
index 066b54f3d..7b3bee8fc 100644
--- a/tcl/board/dp_busblaster_v4.cfg
+++ b/tcl/board/dp_busblaster_v4.cfg
@@ -10,7 +10,7 @@
 # https://raw.githubusercontent.com/dergraaf/busblaster_v4/master/ktlink/ktlink.svf
 #
 # To reprogram the on-board CPLD do:
-# openocd -f board/dp_busblaster_v4.cfg -c "adapter_khz 1000; init; svf <path_to_svf>; shutdown"
+# openocd -f board/dp_busblaster_v4.cfg -c "adapter speed 1000; init; svf <path_to_svf>; shutdown"
 #
 
 source [find interface/ftdi/dp_busblaster.cfg]
diff --git a/tcl/board/imx53loco.cfg b/tcl/board/imx53loco.cfg
index d4ec06079..c4d45f0e3 100644
--- a/tcl/board/imx53loco.cfg
+++ b/tcl/board/imx53loco.cfg
@@ -19,7 +19,7 @@ adapter speed 3000
 jtag_rclk 1000
 $_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
 
-#jtag_nsrst_delay 200
+#adapter srst delay 200
 #jtag_ntrst_delay 200
 
 $_TARGETNAME configure -event "reset-assert" {
diff --git a/tcl/board/kasli.cfg b/tcl/board/kasli.cfg
index 06cc1e6c0..d492249ba 100644
--- a/tcl/board/kasli.cfg
+++ b/tcl/board/kasli.cfg
@@ -3,7 +3,7 @@ ftdi_device_desc "Quad RS232-HS"
 ftdi_vid_pid 0x0403 0x6011
 ftdi_channel 0
 ftdi_layout_init 0x0008 0x000b
-# ftdi_location 1:8
+# adapter usb location 1:8
 
 reset_config none
 transport select jtag
diff --git a/tcl/board/nds32_corvettef1.cfg b/tcl/board/nds32_corvettef1.cfg
index 1a3782c68..cec172342 100644
--- a/tcl/board/nds32_corvettef1.cfg
+++ b/tcl/board/nds32_corvettef1.cfg
@@ -4,7 +4,7 @@
 # ADP-Corvette-F1 R2.0
 # http://www.andestech.com/en/products-solutions/andeshape-platforms/corvette-f1-r2/
 
-adapter_khz     10000
+adapter speed     10000
 
 adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
diff --git a/tcl/board/sayma_amc.cfg b/tcl/board/sayma_amc.cfg
index 009eb78c2..64c085428 100644
--- a/tcl/board/sayma_amc.cfg
+++ b/tcl/board/sayma_amc.cfg
@@ -15,7 +15,7 @@ ftdi_device_desc "Quad RS232-HS"
 ftdi_vid_pid 0x0403 0x6011
 ftdi_channel 0
 # Use this to distinguish multiple boards by topology
-#ftdi_location 5:1
+#adapter usb location 5:1
 # sampling on falling edge generally seems to work and accelerates things but
 # is not fully tested
 #ftdi_tdo_sample_edge falling
diff --git a/tcl/board/snps_hsdk.cfg b/tcl/board/snps_hsdk.cfg
index fed7343de..a6228f4c1 100644
--- a/tcl/board/snps_hsdk.cfg
+++ b/tcl/board/snps_hsdk.cfg
@@ -9,7 +9,7 @@
 #
 
 source [find interface/ftdi/snps_sdp.cfg]
-adapter_khz 10000
+adapter speed 10000
 
 # ARCs supports only JTAG.
 transport select jtag
diff --git a/tcl/interface/xds110.cfg b/tcl/interface/xds110.cfg
index edc438d3b..51f4e28d3 100644
--- a/tcl/interface/xds110.cfg
+++ b/tcl/interface/xds110.cfg
@@ -9,4 +9,4 @@ adapter driver xds110
 
 # Use serial number option to use a specific XDS110
 # when more than one are connected to the host.
-#xds110_serial 00000000
+#xds110 serial 00000000