From: Keith Packard <keithp@keithp.com>
Date: Mon, 27 Oct 2014 18:02:55 +0000 (-0700)
Subject: Update quantities to TF 20/50/100
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=2d0a9852c8ff5c2e5f9978ca7a93edf4e8aa2dd5;p=hw%2Ftelefirefour

Update quantities to TF 20/50/100
---

diff --git a/rfq b/rfq
index cbd72fc..d3673b9 100644
--- a/rfq
+++ b/rfq
@@ -1,11 +1,11 @@
 Hi Laura, Kim,
 
-This is a request for quote on raw boards and partial turnkey assembly of
-TeleFire 1.0 and TeleLCO 1.0. We're planning on running this pair of
-products through 'kickstarter', which means we would set a minimum order
-size, but the order could end up larger than that. I think we'll need to
-have quotes for 10, 25, 50 of each board to help set the pricing in
-the campaign.
+This is a request for quote on raw boards and partial turnkey assembly
+of two new products, TeleLCO 1.0 and TeleFire 1.0. We're planning on
+running these through 'kickstarter', so we'll set a minimum build
+quantity, but the order could end up larger than that. We'd like to
+get quotes for 10, 25, 50 for TeleLCO and 20, 50, 100 TeleFire to help
+set the pricing in the campaign
 
 Kim, like some of our other products, this one has a notch in one side
 to allow a micro USB connector to overhang the board edge.  As a
@@ -17,10 +17,10 @@ TeleLCO and 3956159 for TeleFire. We'll want to run these in standard
 spec with the cheapest option which I think is 5 days.
 
 Laura, the new BOM is attached, and the XYRS data is in the
-telefire.xy and telelco.xy files in the zips.  As usual will provide
-some hard to find parts and want you to turnkey the rest.  We're quite
-cost sensitive for these, so whatever the cheapest assembly turn
-should be fine.
+telefire.xy and telelco.xy files in the zips.  As usual we will
+provide some hard to find parts and want you to turnkey the rest.
+We're quite cost sensitive for these, so whatever the cheapest
+assembly turn should be fine.
 
 From the standard data request for assembly quotes:
 
@@ -32,16 +32,17 @@ From the standard data request for assembly quotes:
 
      Part Number:               TeleFire and TeleLCO
 
-     Revision:                  both 1.0
+     Revision:                  1.0
 
-     How many to assemble:      10, 25 or 50
+     How many to assemble:      10, 25 or 50 TeleLCO
+				20, 50 or 100 TeleFire
 
-     PCB dimensions:            TeleFire is 4.00 x 4.00.
-			        TeleLCO is 4.50  x 3.75
+     PCB dimensions:		TeleLCO is 4.50  x 3.75
+				TeleFire is 4.00 x 4.00.
 
      How parts acquired:        partial turnkey
 
-				  I will provide J3 for TeleFire and
+				  We will provide J3 for TeleFire and
 				  J5 for TeleLCO
 
      Parts both sides?:         no