From: Jonas Hoerberg <jhorberg@sauer-danfoss.com>
Date: Thu, 5 May 2011 08:02:21 +0000 (+0000)
Subject: at91rm9200-ek: add low default communication speed
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=2889471b5807449a69611ddbc4750d10c5514b86;p=fw%2Fopenocd

at91rm9200-ek: add low default communication speed
---

diff --git a/tcl/board/at91rm9200-ek.cfg b/tcl/board/at91rm9200-ek.cfg
index 07a006b0c..a3f253a26 100644
--- a/tcl/board/at91rm9200-ek.cfg
+++ b/tcl/board/at91rm9200-ek.cfg
@@ -18,6 +18,8 @@ $_TARGETNAME configure -event reset-init { at91rm9200_ek_init }
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME cfi 0x10000000 0x00800000 2 2 $_TARGETNAME
 
+# The chip may run @ 32khz, so set a really low JTAG speed
+adapter_khz 8
 
 proc at91rm9200_ek_init { } {
 	# Try to run at 1khz... Yea, that slow!