From: mleech <mleech@221aa14e-8319-0410-a670-987f0aec2ac5>
Date: Tue, 29 May 2007 11:37:08 +0000 (+0000)
Subject: Changed detector chain in usrp_psr_receiver to use complex_to_mag_squared.
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=25c5610e7e74bc875a70aa091e11d8c89d4b4ff1;p=debian%2Fgnuradio

Changed detector chain in usrp_psr_receiver to use complex_to_mag_squared.
Changed usrp_ra_receiver to use dbid() method to determine which card type
  is being used.


git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5564 221aa14e-8319-0410-a670-987f0aec2ac5
---

diff --git a/gr-radio-astronomy/src/python/usrp_psr_receiver.py b/gr-radio-astronomy/src/python/usrp_psr_receiver.py
index 759022cf..3c7dedac 100755
--- a/gr-radio-astronomy/src/python/usrp_psr_receiver.py
+++ b/gr-radio-astronomy/src/python/usrp_psr_receiver.py
@@ -356,17 +356,8 @@ class app_flow_graph(stdgui.gui_flow_graph):
         self.second = gr.fir_filter_fff (int(p), second_filter)
         self.third = gr.fir_filter_fff (10, third_filter)
 
-        # Split complex USRP stream into a pair of floats
-        self.splitter = gr.complex_to_float (1);
-
-        # I squarer (detector)
-        self.multI = gr.multiply_ff();
-
-        # Q squarer (detector)
-        self.multQ = gr.multiply_ff();
-
-        # Adding squared I and Q to produce instantaneous signal power
-        self.adder = gr.add_ff();
+        # Detector
+        self.detector = gr.complex_to_mag_squared()
 
         self.enable_comb_filter = False
         # Epoch folder comb filter
@@ -402,25 +393,12 @@ class app_flow_graph(stdgui.gui_flow_graph):
         # Start connecting configured modules in the receive chain
         #
 
-        # Connect raw USRP to de-dispersion filter, complex->float splitter
-        self.connect(self.u, self.dispfilt, self.splitter)
-
-        # Connect splitter outputs to multipliers
-        # First do I^2
-        self.connect((self.splitter, 0), (self.multI,0))
-        self.connect((self.splitter, 0), (self.multI,1))
-
-        # Then do Q^2
-        self.connect((self.splitter, 1), (self.multQ,0))
-        self.connect((self.splitter, 1), (self.multQ,1))
-
-        # Then sum the squares
-        self.connect(self.multI, (self.adder,0))
-        self.connect(self.multQ, (self.adder,1))
+        # Connect raw USRP to de-dispersion filter, detector
+        self.connect(self.u, self.dispfilt, self.detector)
 
-        # Connect detector/adder output to FIR LPF
+        # Connect detector output to FIR LPF
         #  in two stages, followed by the FFT scope
-        self.connect(self.adder, self.first,
+        self.connect(self.detector, self.first,
             self.second, self.third, self.scope)
 
         # Connect audio output
diff --git a/gr-radio-astronomy/src/python/usrp_ra_receiver.py b/gr-radio-astronomy/src/python/usrp_ra_receiver.py
index 3f9ff85b..9e109754 100755
--- a/gr-radio-astronomy/src/python/usrp_ra_receiver.py
+++ b/gr-radio-astronomy/src/python/usrp_ra_receiver.py
@@ -168,12 +168,12 @@ class app_flow_graph(stdgui.gui_flow_graph):
 
         self.u = usrp.source_c(decim_rate=options.decim)
         self.u.set_mux(usrp.determine_rx_mux_value(self.u, options.rx_subdev_spec))
-        self.cardtype = self.u.daughterboard_id(0)
         # Set initial declination
         self.decln = options.decln
 
         # determine the daughterboard subdevice we're using
         self.subdev = usrp.selected_subdev(self.u, options.rx_subdev_spec)
+        self.cardtype = self.subdev.dbid()
 
         input_rate = self.u.adc_freq() / self.u.decim_rate()
 
@@ -426,7 +426,7 @@ class app_flow_graph(stdgui.gui_flow_graph):
         self.myform['dbname'].set_value(self.subdev.name())
 
         # Set analog baseband filtering, if DBS_RX
-        if self.cardtype == usrp_dbid.DBS_RX:
+        if self.cardtype in (usrp_dbid.DBS_RX, usrp_dbid.DBS_RX_2_1):
             lbw = (self.u.adc_freq() / self.u.decim_rate()) / 2
             if lbw < 1.0e6:
                 lbw = 1.0e6