From: Keith Packard Date: Wed, 1 Mar 2017 21:59:44 +0000 (-0800) Subject: Update TeleMini docs to include v3.0 boards X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=1f346ac05a8f469b9aee021adf4a2db662c672e9;p=web%2Faltusmetrum Update TeleMini docs to include v3.0 boards Signed-off-by: Keith Packard --- diff --git a/Documents/telemini-v1-outline.pdf b/Documents/telemini-v1-outline.pdf new file mode 100644 index 0000000..60896c2 Binary files /dev/null and b/Documents/telemini-v1-outline.pdf differ diff --git a/Documents/telemini-v3-outline.pdf b/Documents/telemini-v3-outline.pdf new file mode 100644 index 0000000..b163ed8 Binary files /dev/null and b/Documents/telemini-v3-outline.pdf differ diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn index 16ea8b3..4e2c03e 100644 --- a/TeleMini/index.mdwn +++ b/TeleMini/index.mdwn @@ -3,18 +3,18 @@ This is a very small, baro-only recording dual-deploy altimeter for model rocketry with integrated telemetry link. -Production units are available from the -[Garbee and Garbee](http://auric.gag.com) web -store. TeleMini starter kits are also available from -[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp). +Version 3.0 is in production now and should be available after April +1, 2017. + +Production units will be available from the [Garbee and +Garbee](http://shop.gag.com) web store. For the latest TeleMini firmware and related ground station software, please visit the [AltOS](../AltOS) page on this site. -These are photos of our current production version: +Here's a photo of a v3.0 prototype: - - + ## Features ## @@ -23,33 +23,33 @@ These are photos of our current production version: * Recording altimeter for model rocketry * Supports dual deployment (can fire 2 ejection charges) * 70cm ham-band transceiver for telemetry downlink -* Barometric pressure sensor good to 45k feet MSL +* Barometric pressure sensor good to 100k feet MSL * Designed to use a single LiPo rechargeable battery -* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube +* 512kB flight data storage +* 1.7 x 0.5 inch board designed to fit inside 18mm airframe coupler tube ### Developer View ### * Hardware Features - * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip - * Sub-1Ghz transceiver - * 8051 MCU + * [ST STM32F042G6](http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f0-series/stm32f0x2/stm32f042g6.html) system on chip + * ARM Cortex-M0 MCU * 32k Flash - * 4k RAM + * 6k RAM * USB 2.0 - * 6 12-bit analog inputs (11 bits with single-ended sensors) - * 2 channels of serial I/O * digital I/O - * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor + * [Measurement Specialties MS5607](http://www.te.com/usa-en/product-CAT-BLPS0035.html) pressure sensor * Software Features - * Written mostly in C with some 8051 assembler - * Runs from on-chip flash, uses on-chip RAM, stores flight data to - upper blocks of on-chip flash + * Written mostly in C with some ARM assembler * Tools Used * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger * Licenses * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) - * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + * The software is licensed [GPL version 2 or later](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + +## Older Versions ## + +[Version 1.0](v1.0). Same size, but less capable. ## Artifacts ## @@ -58,15 +58,8 @@ which is available in [html](../AltOS/doc/altusmetrum.html) and [pdf](../AltOS/doc/altusmetrum.pdf) formats. An outline of the board with drill hole locations is available in -[pdf](../Documents/telemini-outline.pdf) format. +[pdf](../Documents/telemini-v3-outline.pdf) format. The hardware design files can be found on [git.gag.com](http://git.gag.com) in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). -For those who don't have ready access to the gEDA suite, here are pdf snapshots -of the files for Production PCB version 1.0 in more easily readable form. - -* [schematic](v1.0/telemini.pdf) -* [pcb artwork](v1.0/telemini.pcb.pdf) -* [bill of materials](v1.0/partslist.csv) - diff --git a/TeleMini/v1.0/index.mdwn b/TeleMini/v1.0/index.mdwn new file mode 100644 index 0000000..80f5509 --- /dev/null +++ b/TeleMini/v1.0/index.mdwn @@ -0,0 +1,55 @@ +## Version 1.0 ## + +This is the original TeleMini using the CC1111 SoC and MP3H6115A +analog barometric sensor. + + + + +## Features ## + +### User View ### + +* Recording altimeter for model rocketry +* Supports dual deployment (can fire 2 ejection charges) +* 70cm ham-band transceiver for telemetry downlink +* Barometric pressure sensor good to 45k feet MSL +* Designed to use a single LiPo rechargeable battery +* 4kB storage +* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube + +### Developer View ### + +* Hardware Features + * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip + * Sub-1Ghz transceiver + * 8051 MCU + * 32k Flash + * 4k RAM + * USB 2.0 + * 6 12-bit analog inputs (11 bits with single-ended sensors) + * 2 channels of serial I/O + * digital I/O + * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor +* Software Features + * Written mostly in C with some 8051 assembler + * Runs from on-chip flash, uses on-chip RAM, stores flight data to + upper blocks of on-chip flash +* Tools Used + * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout + * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger +* Licenses + * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) + * The software is licensed [GPL version 2 or later](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + +## Artifacts ## + +There is a single manual for TeleMini and all other Altus Metrum products, +which is available in [html](../AltOS/doc/altusmetrum.html) and +[pdf](../AltOS/doc/altusmetrum.pdf) formats. + +An outline of the board with drill hole locations is available in +[pdf](../Documents/telemini-v1-outline.pdf) format. + +The hardware design files can be found on [git.gag.com](http://git.gag.com) +in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). diff --git a/TeleMini/v3.0/telemini-v2.0-640.jpg b/TeleMini/v3.0/telemini-v2.0-640.jpg new file mode 100644 index 0000000..f8fc39b Binary files /dev/null and b/TeleMini/v3.0/telemini-v2.0-640.jpg differ diff --git a/TeleMini/v3.0/telemini-v2.0.jpg b/TeleMini/v3.0/telemini-v2.0.jpg new file mode 100644 index 0000000..b71a167 Binary files /dev/null and b/TeleMini/v3.0/telemini-v2.0.jpg differ