From: Bdale Garbee <bdale@gag.com>
Date: Fri, 26 Dec 2008 03:52:42 +0000 (-0700)
Subject: snapshot before radical update
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=110785f8e21d9ef90cf5463197127e658dd7b2b6;p=hw%2Fbdale

snapshot before radical update
---

diff --git a/pkg/newlib/QFN36.py b/pkg/newlib/QFN36.py
index 09ec258..ee65180 100755
--- a/pkg/newlib/QFN36.py
+++ b/pkg/newlib/QFN36.py
@@ -22,13 +22,15 @@ print 'Element[0x0 "QFN36" "" "" 0 0 0 0 0 100 0x0]'
 print "("
 
 # pad under the chip, must be grounded
+# making the solder mask opening the recommended size, and the actual copper
+# pad 6 mils smaller ... hoping this helps us avoid signal pad shorts!
 print '   Pad[',\
  	mm2mils100(0), \
 	mm2mils100(0), \
  	mm2mils100(0), \
 	mm2mils100(0), \
-	mm2mils100(CoreSquare), \
-	mm2mils100((CoreSquare - PinSquare) / 2), \
+	mm2mils100(CoreSquare)-600, \
+	0, \
  	mm2mils100(CoreSquare), \
 	'"pin37" "37" 0x0100]'
 
@@ -68,7 +70,7 @@ for pin in range (1,10):
 	mm2mils100(-Overall/2 + PinHeight - PinWidth/2), \
 	mm2mils100(PinWidth), \
 	mm2mils100(PinSpacing - PinWidth), \
-  	mm2mils100(PinWidth + 0.1), \
+  	mm2mils100(PinWidth)+600, \
 	'"pin%i"' % (28-pin), '"%i"' % (28-pin), '0x0000]'
 
     print '   Pad[',\
@@ -78,7 +80,7 @@ for pin in range (1,10):
 	mm2mils100(+Overall/2 - PinWidth/2), \
 	mm2mils100(PinWidth), \
 	mm2mils100(PinSpacing - PinWidth), \
-  	mm2mils100(PinWidth + 0.1), \
+  	mm2mils100(PinWidth)+600, \
 	'"pin%i"' % pin, '"%i"' % pin, '0x0000]'
 
     print '   Pad[',\
@@ -88,7 +90,7 @@ for pin in range (1,10):
  	mm2mils100(-2.5 + pin * PinSpacing), \
 	mm2mils100(PinWidth), \
 	mm2mils100(PinSpacing - PinWidth), \
-  	mm2mils100(PinWidth + 0.1), \
+  	mm2mils100(PinWidth)+600, \
 	'"pin%i"' % (19-pin), '"%i"' % (19-pin), '0x0000]'
 
     print '   Pad[',\
@@ -98,7 +100,7 @@ for pin in range (1,10):
  	mm2mils100(-2.5 + pin * PinSpacing), \
 	mm2mils100(PinWidth), \
 	mm2mils100(PinSpacing - PinWidth), \
-  	mm2mils100(PinWidth + 0.1), \
+  	mm2mils100(PinWidth)+600, \
 	'"pin%i"' % (27+pin), '"%i"' % (27+pin), '0x0000]'
 
 print '   ElementArc[',\