From: Bdale Garbee <bdale@gag.com>
Date: Mon, 4 Aug 2025 16:25:33 +0000 (-0600)
Subject: adjust "wings" in top plane around UHF connector to avoid sharp edges
X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=0b2d038ce755c6542336e5a16da8bddc3e4a4241;p=hw%2Ftelemetrum

adjust "wings" in top plane around UHF connector to avoid sharp edges
---

diff --git a/telemetrum.lht b/telemetrum.lht
index eadb057..ad94437 100644
--- a/telemetrum.lht
+++ b/telemetrum.lht
@@ -4038,7 +4038,7 @@ ha:pcb-rnd-board-v8 {
      li:geometry {
        ta:contour {
         { 2.48in; 10.0mil }
-        { 64.77mm; 300.0mil }
+        { 64.643mm; 300.0mil }
         { 2.74in; 300.0mil }
         { 2.74in; 10.0mil }
        }
@@ -4052,7 +4052,7 @@ ha:pcb-rnd-board-v8 {
     ha:polygon.51294 { clearance=40.0mil;
      li:geometry {
        ta:contour {
-        { 64.77mm; 700.0mil }
+        { 64.643mm; 700.0mil }
         { 2.48in; 990.0mil }
         { 2.74in; 990.0mil }
         { 2.74in; 700.0mil }
@@ -29293,7 +29293,7 @@ ha:pcb-rnd-board-v8 {
                 }
               }
 
-              {ha:top copper}           {
+              {ha:top copper}            {
                lid=2
                ha:combining {               }