From: Antonio Borneo Date: Wed, 9 Jun 2021 09:27:57 +0000 (+0200) Subject: arm_tpiu_swo: fix autodetection of SWO pin frequency X-Git-Url: https://git.gag.com/?a=commitdiff_plain;h=00d4699d0b559a0bb3e739a78f3ce1c5731f8dea;p=fw%2Fopenocd arm_tpiu_swo: fix autodetection of SWO pin frequency While the documentation reports that SWO pin frequency can be omitted to let the adapter autodetect the value, the code wrongly drops an error when pin frequency is not specified. Don't require the pin frequency to be set at "enable", but verify that the adapter has properly changes it to a valid value. Change-Id: I3dfbe3256e8887ef4f03512769b06381cdc9db0d Signed-off-by: Antonio Borneo Reported-by: Karl Palsson Fixes: 184724d14e12 ("arm_tpiu_swo: add support for independent TPIU and SWO") Reviewed-on: https://review.openocd.org/c/openocd/+/6310 Tested-by: jenkins Reviewed-by: zapb --- diff --git a/src/target/arm_tpiu_swo.c b/src/target/arm_tpiu_swo.c index a0eba6782..fba3fec4f 100644 --- a/src/target/arm_tpiu_swo.c +++ b/src/target/arm_tpiu_swo.c @@ -625,10 +625,8 @@ static int jim_arm_tpiu_swo_enable(Jim_Interp *interp, int argc, Jim_Obj *const } if (obj->pin_protocol == TPIU_SPPR_PROTOCOL_MANCHESTER || obj->pin_protocol == TPIU_SPPR_PROTOCOL_UART) - if (!obj->swo_pin_freq) { - LOG_ERROR("SWO pin frequency not set"); - return JIM_ERR; - } + if (!obj->swo_pin_freq) + LOG_DEBUG("SWO pin frequency not set, will be autodetected by the adapter"); struct target *target = get_current_target(cmd_ctx); @@ -731,6 +729,17 @@ static int jim_arm_tpiu_swo_enable(Jim_Interp *interp, int argc, Jim_Obj *const return JIM_ERR; } + if (obj->pin_protocol == TPIU_SPPR_PROTOCOL_MANCHESTER || obj->pin_protocol == TPIU_SPPR_PROTOCOL_UART) + if (!swo_pin_freq) { + if (obj->swo_pin_freq) + LOG_ERROR("Adapter rejected SWO pin frequency %d Hz", obj->swo_pin_freq); + else + LOG_ERROR("Adapter does not support auto-detection of SWO pin frequency nor a default value"); + + arm_tpiu_swo_close_output(obj); + return JIM_ERR; + } + if (obj->swo_pin_freq != swo_pin_freq) LOG_INFO("SWO pin data rate adjusted by adapter to %d Hz", swo_pin_freq); obj->swo_pin_freq = swo_pin_freq;