tcl/target, board: remove useless gdb-attach event definitions

Since commit bae76053dc515252dc5c8235b9a848e461080c66
gdb-attach event is defined as halt by default.
Remove useless and in case of bcm281xx wrong definitions of the event.

Change-Id: I8e69780a93722eb9392673303f54d502e71eceb6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4763
Tested-by: jenkins
Reviewed-by: Steven Stallion <sstallion@gmail.com>

diff --git a/tcl/board/atmel_sam3s_ek.cfg b/tcl/board/atmel_sam3s_ek.cfg
index 38b54b7b0e8ec3499679fc78de373fbfff39677b..6e8ffe4172a4cd0e286ef8d50402f3e9617c5cda 100644 (file)
--- a/tcl/board/atmel_sam3s_ek.cfg
+++ b/tcl/board/atmel_sam3s_ek.cfg
@@ -1,3 +1 @@
 source [find target/at91sam3sXX.cfg]
-
-$_TARGETNAME configure -event gdb-attach { reset init }

diff --git a/tcl/board/atmel_sam4s_ek.cfg b/tcl/board/atmel_sam4s_ek.cfg
index dcfa900dc55017023b324e11a09ba5b2c632fad0..ca11e5487110f1488fa6f4defd88377e076db331 100644 (file)
--- a/tcl/board/atmel_sam4s_ek.cfg
+++ b/tcl/board/atmel_sam4s_ek.cfg
@@ -1,3 +1 @@
 source [find target/at91sam4sXX.cfg]
-
-$_TARGETNAME configure -event gdb-attach { reset init }

diff --git a/tcl/board/fsl_imx6q_sabresd.cfg b/tcl/board/fsl_imx6q_sabresd.cfg
index 797e2de5f5a0583f6e968d766ea1516545d88fcb..e1f0892f038da703bc1662e9cc2f13dcae29e332 100644 (file)
--- a/tcl/board/fsl_imx6q_sabresd.cfg
+++ b/tcl/board/fsl_imx6q_sabresd.cfg
@@ -143,7 +143,5 @@ proc imx6q_sabresd_init { } {
 $_TARGETNAME.0 configure -event reset-assert { }
 # hook the init function into the reset-init event
 $_TARGETNAME.0 configure -event reset-init { imx6q_sabresd_init }
-# make sure target is halted when gdb attaches
-$_TARGETNAME.0 configure -event gdb-attach { halt }
 # set a slow default JTAG clock, can be overridden later
 adapter_khz 1000

diff --git a/tcl/board/lemaker_hikey.cfg b/tcl/board/lemaker_hikey.cfg
index d724440481f6ec8f4ae8ff4830e3640ff57dd7f7..ee677c34b8bb8e4a3a7c40b681b1d03c4aff3a9a 100644 (file)
--- a/tcl/board/lemaker_hikey.cfg
+++ b/tcl/board/lemaker_hikey.cfg
@@ -10,9 +10,6 @@ reset_config srst_only srst_push_pull
 
 source [find target/hi6220.cfg]
 
-# halt the cores when gdb attaches
-${_TARGETNAME}0 configure -event gdb-attach "halt"
-
 # make sure the default target is the boot core
 targets ${_TARGETNAME}0
 

diff --git a/tcl/board/tocoding_poplar.cfg b/tcl/board/tocoding_poplar.cfg
index fd6615605d7e117bc05df3b3defdcef0d298d9ca..d8b833004d14fa943cb1c79facaf64e34c5ed79e 100644 (file)
--- a/tcl/board/tocoding_poplar.cfg
+++ b/tcl/board/tocoding_poplar.cfg
@@ -12,9 +12,6 @@ reset_config srst_only srst_push_pull
 
 source [find tcl/target/hi3798.cfg]
 
-# halt the cores when gdb attaches
-${_TARGETNAME}0 configure -event gdb-attach "halt"
-
 # make sure the default target is the boot core
 targets ${_TARGETNAME}0
 

diff --git a/tcl/target/altera_fpgasoc.cfg b/tcl/target/altera_fpgasoc.cfg
index 1fbc5a375a08402679e8ae8e01b9e2b99ca5f660..9a83b5ccb0d2c0b19e11c14248345b1698863679 100644 (file)
--- a/tcl/target/altera_fpgasoc.cfg
+++ b/tcl/target/altera_fpgasoc.cfg
@@ -48,7 +48,6 @@ target create $_TARGETNAME1 cortex_a -dap $_CHIPNAME.dap \
 
 $_TARGETNAME1 configure -event reset-start { adapter_khz 1000 }
 $_TARGETNAME1 configure -event reset-assert-post "cycv_dbginit $_TARGETNAME1"
-$_TARGETNAME1 configure -event gdb-attach { halt }
 
 
 # A9 core 1
@@ -57,7 +56,6 @@ $_TARGETNAME1 configure -event gdb-attach { halt }
 
 #$_TARGETNAME2 configure -event reset-start { adapter_khz 1000 }
 #$_TARGETNAME2 configure -event reset-assert-post "cycv_dbginit $_TARGETNAME2"
-#$_TARGETNAME2 configure -event gdb-attach { halt }
 
 proc cycv_dbginit {target} {
         # General Cortex-A8/A9 debug initialisation

diff --git a/tcl/target/bcm281xx.cfg b/tcl/target/bcm281xx.cfg
index 6432a2092671f78d271b9c77d3c512c8f45be9c8..0715d82d8114c79bcbba67938b5fa3c0be6473db 100644 (file)
--- a/tcl/target/bcm281xx.cfg
+++ b/tcl/target/bcm281xx.cfg
@@ -26,10 +26,3 @@ dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 target create $_TARGETNAME0 cortex_a -dap $_CHIPNAME.dap -coreid 0 -dbgbase 0x3fe10000
 target create $_TARGETNAME1 cortex_a -dap $_CHIPNAME.dap -coreid 1 -dbgbase 0x3fe12000
 target smp $_TARGETNAME0 $_TARGETNAME1
-
-$_TARGETNAME0 configure -event gdb-attach {
-       cortex_a dbginit
-}
-$_TARGETNAME1 configure -event gdb-attach {
-       cortex_a dbginit
-}

diff --git a/tcl/target/imx6.cfg b/tcl/target/imx6.cfg
index 5b59ecf86a7111de8135da4f3753dc79b438eff2..8a32517f311d39d339592dff9c09e07fd5cb260d 100644 (file)
--- a/tcl/target/imx6.cfg
+++ b/tcl/target/imx6.cfg
@@ -57,4 +57,3 @@ adapter_khz 1000
 $_TARGETNAME configure -event reset-start { adapter_khz 1000 }
 
 $_TARGETNAME configure -event reset-assert-post "imx6_dbginit $_TARGETNAME"
-$_TARGETNAME configure -event gdb-attach { halt }

diff --git a/tcl/target/quark_d20xx.cfg b/tcl/target/quark_d20xx.cfg
index 419f9dc4df40a6135c81589717a1ad2bc182cfcd..7d718c26dc2ef22d1278904f4c6e102bf14e598f 100644 (file)
--- a/tcl/target/quark_d20xx.cfg
+++ b/tcl/target/quark_d20xx.cfg
@@ -33,8 +33,6 @@ jtag configure quark_d20xx.quark -event tap-disable \
 
 target create quark_d20xx.quark quark_d20xx -endian little -chain-position quark_d20xx.quark
 
-quark_d20xx.quark configure -event gdb-attach { halt }
-
 quark_d20xx.quark configure -event reset-start {
        # need to halt the target to write to memory
        if {[quark_d20xx.quark curstate] ne "halted"} { halt }

diff --git a/tcl/target/ti_tms570.cfg b/tcl/target/ti_tms570.cfg
index 1c89b8ce51c176aa498c391086127488095dd3aa..ce3a17696eaa9e263839220a2bc61b07cde84131 100644 (file)
--- a/tcl/target/ti_tms570.cfg
+++ b/tcl/target/ti_tms570.cfg
@@ -63,11 +63,6 @@ target create $_TARGETNAME cortex_r4 -endian $_ENDIAN \
 # TMS570 uses quirky BE-32 mode
 $_CHIPNAME.dap ti_be_32_quirks 1
 
-$_TARGETNAME configure -event gdb-attach {
-       cortex_r4 dbginit
-       halt
-}
-
 $_TARGETNAME configure -event "reset-assert" {
        global _CHIPNAME
 

diff --git a/tcl/target/u8500.cfg b/tcl/target/u8500.cfg
index 7d8bfe3757e4a21965c742c517d695f96b78c115..1313efd3a22a7b00cf7951b7ed4558466a95984d 100644 (file)
--- a/tcl/target/u8500.cfg
+++ b/tcl/target/u8500.cfg
@@ -206,10 +206,6 @@ dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 target create $_TARGETNAME_1 cortex_a -dap $_CHIPNAME.dap -dbgbase $_DAP_DBG1 -coreid 0 -rtos linux
 
-$_TARGETNAME_1 configure -event gdb-attach {
-       halt
-}
-
 
 if { ![info exists TARGETNAME_2] } {
 global _TARGETNAME_2
@@ -221,10 +217,6 @@ set _TARGETNAME_2 $TARGETNAME_2
 
 target create $_TARGETNAME_2 cortex_a -dap $_CHIPNAME.dap -dbgbase $_DAP_DBG2 -coreid 1 -rtos linux
 
-$_TARGETNAME_2 configure -event gdb-attach {
-       halt
-}
-
 
 if {![info exists SMP]} {
 global _SMP