restructure

diff --git a/AltusMetrum/index.mdwn b/AltusMetrum/index.mdwn
new file mode 100644 (file)
index 0000000..890f29b
--- /dev/null
+++ b/AltusMetrum/index.mdwn
@@ -0,0 +1,19 @@
+# AltusMetrum
+<p>
+Welcome LCA, SCALE, and OLS 2008 attendees!  
+Thanks for looking, but there's not much here yet...
+</p>
+
+<p>
+Information on the OpenAlt model rocketry avionics system coming very soon!
+</p>
+
+<p>
+Here are photos of the version 0.1 PCB, which has enough issues to not be 
+worth duplicating.  Version 0.2 is coming soon, and will be fully documented
+on this site!
+</p>
+
+<a href="hpim2581.jpg"> <img src="hpim2581-thumb.jpg"></a>
+<a href="hpim2582.jpg"> <img src="hpim2582-thumb.jpg"></a>
+

diff --git a/TeleMetrum/index.mdwn b/TeleMetrum/index.mdwn
new file mode 100644 (file)
index 0000000..8d2a4e5
--- /dev/null
+++ b/TeleMetrum/index.mdwn
@@ -0,0 +1,32 @@
+# TeleMetrum
+
+<p>
+A quick update as of 25 December 2008.  
+The circuit board artwork is out for fab!
+</p>
+<p>
+A quick update as of 16 December 2008.  
+The ARM7-based 'AltusMetrum' design has been shelved indefinitely.
+Working with Keith Packard, I recently embarked on a complete redesign based on the TI cc1111.
+We got there by deciding we need a low-power RF beacon for post-landing direction finding, learning
+of the existence of this part, then realizing that we could radically simplify things by using it
+as the basis for a completely new avionics design.
+The cc1111 integrates a full 70cm transceiver, 8051 processing core, and peripherals on one chip.
+We add to that a barometric sensor, temperature sensor, accelerometer, eeprom memory, and full LiPo
+battery support powered by a USB interface also used for configuration and post-flight data extraction.
+It looks like we can get all the features we want on a single board for less than the price of most
+commercial altimeter boards, with the only downside being dramatically reduced processing power.
+We have a complete schematic and a first pass PCB layout that is currently
+under review and improvement prior to sending out for raw boards.
+</p>
+<p>
+See the hw/telemetrum tree in our
+<a href="http://git.gag.com">public git repository</a> 
+for the current state of the gEDA design files.
+</p>
+<p>
+We hope to be turning on boards and writing firmware over the 
+Christmas / New Years holiday season.
+Stay tuned!
+</p>
+<hr>

diff --git a/index.mdwn b/index.mdwn
index cd2bf38d6aa5b07ea82952a9def608315c071260..c8b544370993ea2507f193551a9b284c2649274a 100644 (file)
--- a/index.mdwn
+++ b/index.mdwn
@@ -5,58 +5,8 @@ series of open hardware and software designs of avionics solutions for high
 powered model rocketry.  Please consider everything here work perpetually 
 in process!
 
-# TeleMetrum
-
-<p>
-A quick update as of 25 December 2008.  
-The circuit board artwork is out for fab!
-</p>
-<p>
-A quick update as of 16 December 2008.  
-The ARM7-based 'AltusMetrum' design has been shelved indefinitely.
-Working with Keith Packard, I recently embarked on a complete redesign based on the TI cc1111.
-We got there by deciding we need a low-power RF beacon for post-landing direction finding, learning
-of the existence of this part, then realizing that we could radically simplify things by using it
-as the basis for a completely new avionics design.
-The cc1111 integrates a full 70cm transceiver, 8051 processing core, and peripherals on one chip.
-We add to that a barometric sensor, temperature sensor, accelerometer, eeprom memory, and full LiPo
-battery support powered by a USB interface also used for configuration and post-flight data extraction.
-It looks like we can get all the features we want on a single board for less than the price of most
-commercial altimeter boards, with the only downside being dramatically reduced processing power.
-We have a complete schematic and a first pass PCB layout that is currently
-under review and improvement prior to sending out for raw boards.
-</p>
-<p>
-See the hw/telemetrum tree in our
-<a href="http://git.gag.com">public git repository</a> 
-for the current state of the gEDA design files.
-</p>
-<p>
-We hope to be turning on boards and writing firmware over the 
-Christmas / New Years holiday season.
-Stay tuned!
-</p>
-<hr>
-# AltusMetrum
-<p>
-Welcome LCA, SCALE, and OLS 2008 attendees!  
-Thanks for looking, but there's not much here yet...
-</p>
-
-<p>
-Information on the OpenAlt model rocketry avionics system coming very soon!
-</p>
-
-<p>
-Here are photos of the version 0.1 PCB, which has enough issues to not be 
-worth duplicating.  Version 0.2 is coming soon, and will be fully documented
-on this site!
-</p>
-
-<a href="hpim2581.jpg"> <img src="hpim2581-thumb.jpg"></a>
-<a href="hpim2582.jpg"> <img src="hpim2582-thumb.jpg"></a>
-
-----
+# [TeleMetrum](TeleMetrum/)
+# [AltusMetrum](AltusMetrum/)
 
 This site is powered by [ikiwiki](http://ikiwiki.info), 
 and hosted by [Garbee and Garbee](http://www.gag.com)