more notes on switches, board geometry, etc

diff --git a/Notebook b/Notebook
index 80da30c657f7aeaf29f9446d3e5bb1da80db9599..2afab1f20beb0a8e5d5aa5eb063ffd7541e62e37 100644 (file)
--- a/Notebook
+++ b/Notebook
@@ -243,3 +243,18 @@
   if I want to have an actual switch for interrupting the SOM boot.  For about
   twice as much per, there's a smaller SMT part, "PTS815 SJG 250 SMTR LFS"
 
+2024.07.07
+- seems clear that I'm going to want actual switches for rst_n and sw_rst, like
+  the eval module has, to ensure I can get into uboot
+
+2024.07.08
+- after talking to Terry, the right answer is probably to make the PCB 0.25"
+  wider, to make room for two switches on the corner by the siren/strobe screw
+  strip, and have the right-angle USB connector hanging less off the side of
+  the board.  I'll want to shift the microSD connector over, but otherwise it
+  probably makes sense to just leave the rest of the layout alone?  I thought
+  briefly about switching the LPC footprint to the larger one to use the 
+  LPC11U12 parts I bought, but I have enough 14s to probably be a lifetime
+  supply for QuantiMotor, and could use the 12s on the greenhouse board I've
+  been contemplating, so no real reason to go to the effort.
+