Get rid of needless OMAP and Davinci target config options

so they provide better examples and are easier to maintain.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2797 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/tcl/target/omap2420.cfg b/tcl/target/omap2420.cfg
index 01557491f9f934f7a96f43a3eda0c75c6ecd6a0a..866b4a342299dfdfb2fe60111cd9b0f3fca1479c 100644 (file)
--- a/tcl/target/omap2420.cfg
+++ b/tcl/target/omap2420.cfg
@@ -6,11 +6,6 @@ if { [info exists CHIPNAME] } {
 } else {
    set  _CHIPNAME omap2420
 }
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
 
 # NOTE: likes slowish clock on reset (1.5 MBit/s or less) or use RCLK
 
@@ -46,7 +41,7 @@ jtag newtap $_CHIPNAME jrc -irlen 2 -ircapture 0x1 -irmask 0x3 -expected-id $_JR
 
 # GDB target:  the ARM.
 set _TARGETNAME $_CHIPNAME.arm
-target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME arm11 -chain-position $_TARGETNAME
 
 # scratch:  framebuffer, may be initially unavailable in some chips
 $_TARGETNAME configure -work-area-phys 0x40210000

diff --git a/tcl/target/omap5912.cfg b/tcl/target/omap5912.cfg
index fa0fc9e07beb88d315a4116c98009b2a0f55df8b..30650cfbedb2d802a26ae390ec3a610973e6c4e3 100644 (file)
--- a/tcl/target/omap5912.cfg
+++ b/tcl/target/omap5912.cfg
@@ -7,13 +7,6 @@ if { [info exists CHIPNAME] } {
    set  _CHIPNAME omap5912
 }
 
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-  # this defaults to a bigendian
-   set  _ENDIAN little
-}
-
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
@@ -30,7 +23,7 @@ jtag newtap $_CHIPNAME arm -irlen 4 -expected-id $_CPUTAPID
 jtag newtap $_CHIPNAME unknown -irlen 8
 
 set _TARGETNAME $_CHIPNAME.arm
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME
 
 proc omap5912_reset {} {
        #

diff --git a/tcl/target/ti_dm355.cfg b/tcl/target/ti_dm355.cfg
index 67b3f7a48af85ead5ffd2002cd260156bceecb54..b1e19e99d4f03b64a33c75270ba0bc6620d019f8 100644 (file)
--- a/tcl/target/ti_dm355.cfg
+++ b/tcl/target/ti_dm355.cfg
@@ -6,11 +6,6 @@ if { [info exists CHIPNAME] } {
 } else {
    set  _CHIPNAME dm355
 }
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
 
 # TI boards default to EMU0/EMU1 *high* -- ARM and ETB are *disabled*
 # after JTAG reset until ICEpick is used to route them in.
@@ -33,8 +28,7 @@ if { [info exists ETB_TAPID ] } {
 } else {
    set _ETB_TAPID 0x2b900f0f
 }
-jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \
-       -expected-id $_ETB_TAPID $EMU01
+jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETB_TAPID $EMU01
 jtag configure $_CHIPNAME.etb -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 1"
 
@@ -44,8 +38,7 @@ if { [info exists CPU_TAPID ] } {
 } else {
    set _CPU_TAPID 0x07926001
 }
-jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \
-       -expected-id $_CPU_TAPID $EMU01
+jtag newtap $_CHIPNAME arm -irlen 4 -irmask 0xf -expected-id $_CPU_TAPID $EMU01
 jtag configure $_CHIPNAME.arm -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 0"
 
@@ -55,7 +48,7 @@ if { [info exists JRC_TAPID ] } {
 } else {
    set _JRC_TAPID 0x0b73b02f
 }
-jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID
+jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID
 
 ################
 
@@ -89,7 +82,7 @@ source [find target/davinci.cfg]
 # and the ETB memory (4K) are other options, while trace is unused.
 set _TARGETNAME $_CHIPNAME.arm
 
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME
 
 # NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel,
 # and that the work area is used only with a kernel mmu context ...

diff --git a/tcl/target/ti_dm365.cfg b/tcl/target/ti_dm365.cfg
index 06a52d28f58b714c21aebf63887ea472b368944a..3a17d1a8be77d9f2b4372268ea21fc087448e747 100644 (file)
--- a/tcl/target/ti_dm365.cfg
+++ b/tcl/target/ti_dm365.cfg
@@ -24,8 +24,7 @@ if { [info exists ETB_TAPID ] } {
 } else {
    set _ETB_TAPID 0x2b900f0f
 }
-jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \
-       -expected-id $_ETB_TAPID $EMU01
+jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETB_TAPID $EMU01
 jtag configure $_CHIPNAME.etb -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 1"
 
@@ -35,8 +34,7 @@ if { [info exists CPU_TAPID ] } {
 } else {
    set _CPU_TAPID 0x0792602f
 }
-jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \
-       -expected-id $_CPU_TAPID $EMU01
+jtag newtap $_CHIPNAME arm -irlen 4 -irmask 0xf -expected-id $_CPU_TAPID $EMU01
 jtag configure $_CHIPNAME.arm -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 0"
 
@@ -46,8 +44,7 @@ if { [info exists JRC_TAPID ] } {
 } else {
    set _JRC_TAPID 0x0b83e02f
 }
-jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
-       -expected-id $_JRC_TAPID
+jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID
 
 ################
 

diff --git a/tcl/target/ti_dm6446.cfg b/tcl/target/ti_dm6446.cfg
index cc23ad440c2e795b731817a50d99d4bf813ce68f..e96c3e15f3910c0392bbb85bf0585d04f16163ee 100644 (file)
--- a/tcl/target/ti_dm6446.cfg
+++ b/tcl/target/ti_dm6446.cfg
@@ -20,7 +20,7 @@ set EMU01 "-enable"
 #set EMU01 "-disable"
 
 # Subsidiary TAP: unknown ... must enable via ICEpick
-jtag newtap $_CHIPNAME unknown -irlen 8 -ircapture 0xff -irmask 0xff -disable
+jtag newtap $_CHIPNAME unknown -irlen 8 -disable
 jtag configure $_CHIPNAME.unknown -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 3"
 
@@ -35,8 +35,7 @@ if { [info exists ETB_TAPID ] } {
 } else {
    set _ETB_TAPID 0x2b900f0f
 }
-jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \
-       -expected-id $_ETB_TAPID $EMU01
+jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETB_TAPID $EMU01
 jtag configure $_CHIPNAME.etb -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 1"
 
@@ -46,8 +45,7 @@ if { [info exists CPU_TAPID ] } {
 } else {
    set _CPU_TAPID 0x07926001
 }
-jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \
-       -expected-id $_CPU_TAPID $EMU01
+jtag newtap $_CHIPNAME arm -irlen 4 -irmask 0xf -expected-id $_CPU_TAPID $EMU01
 jtag configure $_CHIPNAME.arm -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 0"
 
@@ -57,8 +55,7 @@ if { [info exists JRC_TAPID ] } {
 } else {
    set _JRC_TAPID 0x0b70002f
 }
-jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
-       -expected-id $_JRC_TAPID
+jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID
 
 # GDB target:  the ARM, using SRAM1 for scratch.  SRAM0 (also 8K)
 # and the ETB memory (4K) are other options, while trace is unused.