echo [format "set p15 0x%04x, 0x%08x" $regs $value]
- arm11 mcr $TARGETNAME 15 [expr ($regs>>12)&0x7] \
+ mcr 15 [expr ($regs>>12)&0x7] \
[expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] \
[expr ($regs>>8)&0x7] $value
@}
@subsection ARM11 specific commands
@cindex ARM11
-@deffn Command {arm11 mcr} pX opc1 CRn CRm opc2 value
-Write @var{value} to a coprocessor @var{pX} register
-passing parameters @var{CRn},
-@var{CRm}, opcodes @var{opc1} and @var{opc2},
-and the MCR instruction.
-(The difference beween this and the MCR2 instruction is
-one bit in the encoding, effecively a fifth parameter.)
-@end deffn
-
@deffn Command {arm11 memwrite burst} [value]
Displays the value of the memwrite burst-enable flag,
which is enabled by default. Burst writes are only used
If @var{value} is defined, first assigns that.
@end deffn
-@deffn Command {arm11 mrc} pX opc1 CRn CRm opc2
-Read a coprocessor @var{pX} register passing parameters @var{CRn},
-@var{CRm}, opcodes @var{opc1} and @var{opc2},
-and the MRC instruction.
-(The difference beween this and the MRC2 instruction is
-one bit in the encoding, effecively a fifth parameter.)
-Displays the result.
-@end deffn
-
@deffn Command {arm11 step_irq_enable} [value]
Displays the value of the flag controlling whether
IRQs are enabled during single stepping;
return 0;
}
-static int arm11_handle_mrc_mcr(struct command_context_s *cmd_ctx,
- char *cmd, char **args, int argc, bool read)
-{
- int retval;
-
- if (argc != (read ? 6 : 7))
- {
- LOG_ERROR("Invalid number of arguments.");
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- arm11_common_t * arm11 = arm11_find_target(args[0]);
-
- if (!arm11)
- {
- LOG_ERROR("Parameter 1 is not a the JTAG chain position of an ARM11 device.");
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- if (arm11->target->state != TARGET_HALTED)
- {
- LOG_WARNING("target was not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- uint32_t values[6];
-
- for (size_t i = 0; i < (read ? 5 : 6); i++)
- {
- COMMAND_PARSE_NUMBER(u32, args[i + 1], values[i]);
-
- if (values[i] > arm11_coproc_instruction_limits[i])
- {
- LOG_ERROR("Parameter %ld out of bounds (%" PRId32 " max).",
- (long)(i + 2),
- arm11_coproc_instruction_limits[i]);
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
- }
-
- uint32_t instr = 0xEE000010 |
- (values[0] << 8) |
- (values[1] << 21) |
- (values[2] << 16) |
- (values[3] << 0) |
- (values[4] << 5);
-
- if (read)
- instr |= 0x00100000;
-
- retval = arm11_run_instr_data_prepare(arm11);
- if (retval != ERROR_OK)
- return retval;
-
- if (read)
- {
- uint32_t result;
- retval = arm11_run_instr_data_from_core_via_r0(arm11, instr, &result);
- if (retval != ERROR_OK)
- return retval;
-
- LOG_INFO("MRC p%d, %d, R0, c%d, c%d, %d = 0x%08" PRIx32 " (%" PRId32 ")",
- (int)(values[0]),
- (int)(values[1]),
- (int)(values[2]),
- (int)(values[3]),
- (int)(values[4]), result, result);
- }
- else
- {
- retval = arm11_run_instr_data_to_core_via_r0(arm11, instr, values[5]);
- if (retval != ERROR_OK)
- return retval;
-
- LOG_INFO("MRC p%d, %d, R0 (#0x%08" PRIx32 "), c%d, c%d, %d",
- (int)(values[0]), (int)(values[1]),
- values[5],
- (int)(values[2]), (int)(values[3]), (int)(values[4]));
- }
-
- return arm11_run_instr_data_finish(arm11);
-}
-
-static int arm11_handle_mrc(struct command_context_s *cmd_ctx,
- char *cmd, char **args, int argc)
-{
- return arm11_handle_mrc_mcr(cmd_ctx, cmd, args, argc, true);
-}
-
-static int arm11_handle_mcr(struct command_context_s *cmd_ctx,
- char *cmd, char **args, int argc)
-{
- return arm11_handle_mrc_mcr(cmd_ctx, cmd, args, argc, false);
-}
-
static int arm11_mrc_inner(target_t *target, int cpnum,
uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm,
uint32_t *value, bool read)
"DEBUG ONLY - Hardware single stepping"
" (default: disabled)");
- register_command(cmd_ctx, top_cmd, "mcr",
- arm11_handle_mcr, COMMAND_ANY,
- "Write Coprocessor register. mcr <jtag_target> <coprocessor> <opcode 1> <CRn> <CRm> <opcode 2> <32bit value to write>. All parameters are numbers only.");
-
mw_cmd = register_command(cmd_ctx, top_cmd, "memwrite",
NULL, COMMAND_ANY, NULL);
register_command(cmd_ctx, mw_cmd, "burst",
"Terminate program if transfer error was found"
" (default: enabled)");
- register_command(cmd_ctx, top_cmd, "mrc",
- arm11_handle_mrc, COMMAND_ANY,
- "Read Coprocessor register. mrc <jtag_target> <coprocessor> <opcode 1> <CRn> <CRm> <opcode 2>. All parameters are numbers only.");
register_command(cmd_ctx, top_cmd, "step_irq_enable",
arm11_handle_bool_step_irq_enable, COMMAND_ANY,
"Enable interrupts while stepping"
# */
# mov r0, #0
# mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- arm11 mcr c100.cpu 15 0 7 7 0 0x0
+ mcr 15 0 7 7 0 0x0
# mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
- arm11 mcr c100.cpu 15 0 8 7 0 0x0
+ mcr 15 0 8 7 0 0x0
# /*
# * disable MMU stuff and caches
# */
# mrc p15, 0, r0, c1, c0, 0
- arm11 mrc c100.cpu 15 0 1 0 0
+ mrc 15 0 1 0 0
# bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
# bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
# orr r0, r0, #0x00000002 @ set bit 2 (A) Align
# orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
# orr r0, r0, #0x00400000 @ set bit 22 (U)
# mcr p15, 0, r0, c1, c0, 0
- arm11 mcr c100.cpu 15 0 1 0 0 0x401002
+ mcr 15 0 1 0 0 0x401002
# This is from bsp_init() in u-boot/boards/mindspeed/ooma-darwin/board.c
# APB init
# // Setting APB Bus Wait states to 1, set post write
projects / fw / openocd / commitdiff